KPIIOT (King Pigeon Industrial Internet of Things Cloud Platform) is a million-level access industrial IoT cloud platform. The scientific architecture design can quickly and cost-effectively realize the customer's demand for customized cloud platform and meet the customer's customer demand for cloud platform customization.
The GSM 3G 4G LTE Phase Loss Monitoring Alarm is special for remotely monitoring onsite temperature, humidity,AC power, power status through wireless GSM/3G/4G Network. When the 3/Single phase power failure, power voltage or temperature, humidity exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately. Supports SMS,GPRS,3G,4G Lte Cellular Networks. Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM 3G 4G LTE Phase Loss Monitoring rejects the call from authorized number then return onsite temperature, humidity,AC power status and power voltage on the first 'ring'; 3. Multiple applications. (3/Single phase status, power status, solar panel, dc voltage,temperature, humidity); 4. Up to 10 authorized phone numbers, 5 can be used to receive SMS,and 5 can be used to call and SMS while alarm occurrence; 5. 1 input for Temperature & Humidity,AC power status monitoring; 6. External AC Power status monitoring, AC ON/OFF will send SMS to authorized phone numbers; 7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 0-36VDC, no need additional sensor to save cost; 8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers; 9. Support remotely read historic data via SMS; 10. Support Modbus TCP and Modbus RTU over TCP protocol for cloud monitoring; 11. Rechargeable Backup Battery inside can last 8hours; 12. Secure - Using caller ID and password for identification, unknown callers are ignored; 13. Programmable by SMS Commands or APPs with password protection; 14. Based on GSM/3G/4G Network, applied to many applications. 15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.
Model noï¼?S281 The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
Model no S266 The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly. Advantages Quad band 850/900/1800/1900Mhz GSM GPRS Module inside; 3G UMTS/HSDPA/4G Modules are optional.; 32 bit MCU, reliable performance with in-built watchdog; Support temperature & humidity monitoring remotely in real-time; Support 8 channel temperature input interface(DS18B20 Temperature sensors); Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC; High/Low Alert via SMS/Call/GPRS; Supports 1 DNS or IP address as server; Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network; Automatically resend the data while communication failure, GPRS failure will alert by SMS text; Supports remotely restart the device, and configure it by SMS commands remotely; Up to 10 user's phone number to receive alarm and daily report SMS/Call; Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers; In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation; In-built internal clock, support 11 actions on schedule at pre-set time; Internal 16MB memory, logs more than 200000 records; Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm; Support Android/IOS APP, easily & friendly for use/config. Support remote upgrade the firmware via PC. Can be operated from anywhere, no distance limitation; Secure - Using caller ID and password for identification, unknown callers are ignored;
The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. Supports 10 user numbers for receiving device daily reports, dropped calls, serial port data overrun, and specific SMS alarm messages triggered abnormally; Built-in powerful timer function, support timing automatic reporting, timing SMS daily report, timing online, timing restart and other functions; Modbus TCP protocol and Modbus RTU protocol are compatible with transparent transmission; Ethernet comes with a transformer isolator, 2KV electromagnetic isolation, and shell isolation protection; Adopt time division multiplexing, multi-channel mounting, less interference, more mounting nodes, can support up to 99 temperature and humidity collection points It can monitor the terminal battery level in real time to ensure that the device data does not drop.
The IoT10 Series wireless temperature and humidity IoT sensor are low power comsuption design,it is a wireless Internet of things gateway, designed for converting DS18B20 Temperature sensor signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.Widely used to real time remotely monitoring temperature of Refrigerator freezer, chicken factory, chemical plant, food production and storage, warehouse, hospital etc. 1. Can be used as a complete product or as a secondary development module; 2. Two working modes are available: Normal mode: Real-time data transmission,Users can inquiry the real-time status; Low power consumption mode: Ultra low power consumption(ï¼?230uA); 3. Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc; 4. Coverting DS18B20 temperature probe signal to cloud platform over cellular network; 5. Support configure parameters and query real-time data via SMS,software,cloud platform; 6. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message; 7. Support two different server centers,can set IP address or domain name ; 8. Support Modbus RTU over TCP and MQTT protocol; 9. Wide range power supply 7~24VDC with phase-reversal protection; 10. Using Nano sim card,support PIN code function; 11. Provide PCBA or waterproof enclosure,can be used outside.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure itâ??s reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. 1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Power supply 12~36VDC with over voltage and phase-reversal protection; 3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols; 4. DO1 support PWM output; 5. Management and configuration via LAN connection configuration software for easy operation and maintenance; 6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter; 7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC; 9. High sampling frequency and special filtering strategy to ensure reliability; 10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules; 11.Supports register mapping function and extend I/O inquiry strategy; 12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection; 3. Management and configuration via LAN connection configuration software for easy operation and maintenance; 4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol; 5. 16 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 6. High sampling frequency and special filtering strategy to ensure reliability; 7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules; 8. Supports register mapping function and extend I/O inquiry strategy; 9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
Wide Compatibility: Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Ubiquiti UF-RJ45-10G, Netgear AXM765, D-Link DEM-440XT, TP-Link, Mikrotik, Supermicro, Linksys, and Other Open Switches. 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.) Easy to use: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports. High Quality: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch. After-sales Service: 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us.
1x Multimode Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet; 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover. Equiped with high-quality chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Base-TX/FX. Supports jumbo frame size 9K byte. Modulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status. Only 93mm x 72mm x 27mm(3.7"x 2.8"x 1.1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space. Product List: 1x Gigabit Ethernet Media Converter, 1x 1000Base-SX SFP module, 1x DC Power Adapter, 1x Product Manual. 30-day Money-Back guarantee, lifetime tech support.
Specification Item:2 gang 13A Switch wall socket with USB charger Code Number:P23U1R1 Rated current:13A Voltage:AC 220-250V IP grade:IP20 Cover plate:PC Frame:PC Base:PA66+25% glass fiber On/Off operation:Switch: 15000 times/ Socket: 15000 times Fixing screw:M3.5*P0.6*24mm Mounting box depth:35mm Standard:BS546, BS 1363-2 Packing Details: Inner Box (1PC):148*91*34mm Box (10PCS):180*155*97mm Carton (100PCS):550*375*175SSmm USB Function Description: Input:220-240 V 50/60 Hz; Output:DC 5V Max 2100mA; Environment Interior Temperature:-5â??-39â??; Charge:Iphones, Ipad and other MP3, Mobile Phones, PDAs & Digital Cameras etc. Advantage This product adopts innovative shape design, beautiful radian, elegant structure, flexible modular structure, easy installation and disassembly, rich combination of face frames, complete product function range. How To Use Products 1. The total power of the connected electrical appliances shall not exceed the rated power. 2. It is strictly forbidden to tie wires in order to avoid abnormal overheating. 3. Please do not use in humid environment. 4. Do not use in case of damaged sockets and wires. 5. Do not disassemble without authorization. 6. Do not use wet hand to plug in and pull out plugs. 7. Do not place boards where children can touch them.
TX-80W 8 channel Range: 50-100m Output power: 10W each channel,total 80W X-80W is a high power jammer, it has 8 frequency bands and each band power 10W, the output 80W in total can effectively get rid of the signal threat in seconds by jamming. The Jamming range is 10-30 meters to meet your needs as much as possible. And the bands can include almost signals of 2G/3G/4G/Wifi/GPS, you can option freely. Need more? Contact us for customizing. TXtelsig is the leading manufacturer to design and produce signal jamming and wireless coverage product with professional and experienced research and development teams. We have the strength to provide you with the most cost-effective products and plan. Product Feature 1. Ultra-wideband jamming coverage and efficient frequency division ensures best signal interference of different frequency and cut off signal link in seconds 2. Each channel separate to deal with specific frequency signal as customized 3. Jamming range 10-30 meters, to get rid of signal threat at first time 4. Durable and heat-dissipation aluminum alloy shell; Of military standard being anti throw and pressure-resistant 5. One switch control, convenient and simple, one-button on/off 6. With cooling fan and multiple cooling holes form a good cooling system 7. Handheld grip design easy to carry on. Application: 1. Conference room, Confidential office, negotiation room 2. Mobile vehicles, on-site protection of important figures in the political and business circles 3. Party and government organs, temporary meeting rooms for all kinds of small meetings of enterprises 4. Personal or commercial special needs
Built -in Battery: 1 hour Drone Jamming Frequency: 3 channels for 2.4G 5.8G GPSL1 Range: 1000-1500 meter Output Power: 60W VSWR and Temperature Protection
---TX-E10 Phone WiFi Signal Jammer ---This jammer has a strong jamming signal ability, to block 2G 3G 4G 5G phone signal as need and also WiFi signal. Even MOQ 1pcs can have customized frequency for all 10 channels. Jamming range radius : 10-30 meter ---Product Feature 1.10 chancel design, 2 watts each band, total 20Watts (still depends on given area signal environment ) 2. High gain 5dBi omni directional antenna, 360 degree shield signal no blind corner 3. Safe Stable use with regulated power supply 4. Complete cooling system with the ultra thick heatsink, large 6*6cm fans 5. Independent module design with signal source each channel; for easy maintainance, if have any damaged frequency band replace with new PCB directly in 2 year warranty ---Application Places Meeting room, conference room, museum, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security. For some locations of special purpose such as hospitals, gas stations and more, please do field test first to make sure no interference happened to the normal operation of their equipment and instrument ---Packing List 1pcs Jammer, 10pcs Antennas, 1pcs AC adapter
It adopts RF jamming 9 channels and can shield phone wifi signal in large area in 10-20 meter radius (depends on real using environment ). In that area, the phone can not send or receive messages or calls, and Wifi network can not be used anymore.
Specification Jamming Range 1000-1500 meter Package Content 1pcs*Signal Jammer 1pcs*External Battery lasts 1.5 Hour 1pcs*AC Adapter Jamming Frequency RC2.4GHz: 2400-2500MHz 43dbm/20W; RC5.8GHz: 5725-5850MHz 43dbm/20W; GPSL1 and Glonass L1:1560-1620MHz 43dbm/20W; (Customized) This is a latest drone signal jammer for shield 100% 360 degree drone such as DJI Phantom 4 Phantom 3 Professional Advanced, Standard series, Inspire Series, etc. Function: The jammer can block the signal between UAV and remote control, force it return,land or hover, Stop GPS navigation and data transmission.
* Gun Shape Drone Signal Jammer * Jamming Range: 1500-2000 meter * Size/Weight: 870*285*80mm/5.1kgs * 3 channels: GPSL1, WIFI2.4G, WiFi5.8G
Opticombine Industrial Ethernet Switch, 1 x 10/100/1000M Base A network switch is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device. Feature 1. High quality optoelectronic modules provide good optical and electrical characteristics. 2. Ensures reliable data transmission and long working life. 3. Supports full duplex or half duplex mode with automatic negotiation capability. 4. Automatic cross recognition of network port support. 5. In line with carrier level operation standard, the average fault free operation is more than 50 thousand hours. 6. Working power supply: DC 10-52V provides anti connection protection. 7. Uses SC optical fiber interface (optional ST, FC, SFP interface) 8. Lightning surge protection (power):5000A (8/20 s)
Smart Home Gateway Convexa-S is a unique smart home gateway with beamforming Wi-Fi, Zigbee* and Bluetooth* that can connect all your IoT devices together. More wireless protocols will be added. 400Mbps (2.4G) + 867Mbps (5G) Combined Wi-Fi Speed Built-in Bluetooth or Zigbee Module * 3 x Gigabit Ports Supports MU-MIMO
