SSD, CPU, 4G module.
Memory card, usb flash disk, hdd data recovery card.
USB, flash card, memory card.
Computer products: USB flash drive & memory card.
Memory RAM, USB, flash drive, DDR1, DDR2, DDR3.
Description: Communication interfaces Ethernet Number : 2 Primary Ethernet interface Network interface : 10/100BASE-TX Ethernet / Fast Ethernet Data transfer rate : Up to 100 Mbps Distance between devices : Up to 100 m Protocols : Meggitt TCP/IP proprietary protocol for communication with the VM600 MPSx software, Modbus TCP and/or PROFINET Function : VM600 rack configuration and communications using the VM600 MPSx software, fieldbus Modbus TCP communications and/or fieldbus PROFINET communications
The safe decision. productnews The new communication modules enable the programming of the CPUs with ELOP II via Ethernet. These are used with the CPUs which are also new: F 8650X/F 8652X (safe CPU for H51q/H41q systems) F 8651X/F 8653X (non-safe CPU for H51q/H41q systems) The already existing communication modules F 8627 and F 8628 are still available in the product portfolio. Issue March 2006_Page 1/2 Applications/Accompanying products Part numbers/Delivery date F 8627X: 98 4862765 F 8628X: 98 4862865 Delivery date: immediately 2 new communication modules for H41q/H51q systems â?¢ F 8627X: Communication module for the protocols safeethernet and OPC DA via HIMA OPC server New: OPC A&E via HIMA OPC server, MODBUS-TCP slave and ELOP II programming via Ethernet (from ELOP II V. 4.1) Function Even more protocols! F8627X/F8628X Dimensions and weight â?¢ F 8628X: Communication module for the protocol Profibus DP slave New: ELOP II programming via Ethernet (from ELOP II V. 4.1) 19-inch module for H41q/H51q systems 3 height units (HU), 3 x 44.45 mm 4 width units (WU), 4 x 5.08 mm
The STC USB-C to 3-Port USB-A Hub with Gigabit Ethernet is an essential companion for a computer with a USB-C or Thunderbolt 3 port. Instantly add 3 USB 3.0 ports and a Gigabit Ethernet network connection from a single USB-C port. This lightweight and portable USB hub adapter weighs less than 2 ounces with a six-inch cable tail that folds neatly beside the hub for storage or traveling.
New product with WIFI6E DR6018 Qualcomm-Atheros IPQ6010 Qualcomm-Atheros IPQ6010 Quad-core ARM 64bit A53 @1.8GHz Processor 1GB DDRL3L System Memory 32MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS) 2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate 2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate Support: QUECTEL RM500Q-GL Support: QCN9074 WiFi 6E Card Wallys� Communications� (SuZhou)� Co.,� Ltd.,� http://www.wallystech.com,which� is mainly engaged in the research and development and production of wireless communication products,providing� superior� OEM/ODM/JDM� services� in� wireless� communications and customer-specific solution.In addition to the PCBA mainboard, we can also customize indoor or outdoor antennas, which we have extensive experience in. There is also the Tooling. We can do the Tooling for the customer, to undertake a variety of materials mainly metal and plastic enclosure production. Whether antenna enclosure or router enclosure, we can customize for you. Besides of the Qualcomm chips we currently use, we can also use different chips to design according to customers' needs
This USB C Network Adapter USB-C to 10/100/1000 Gigabit Ethernet LAN Adapter Compatible with Windows, Mac OS, Linux, Chrome OS for Apple MacBook Pro 2018, HP ENVY,Lenovo, Dell XPS, Chromebook Pixel etc Stable Performance With Wired Gigabit Ethernet: STC USB C 3.1(Thunderbolt 3 compatible) to Gigabit Ethernet adapter convert a USB-C port to a Gigabit Ethernet port and get a faster, more reliable network speed than Wi-Fi. It s good for avoid Wi-Fi interference and privacy issues.
USB 3.0 for PCI-E Riser PCI E Express 1X to 16X Riser Card offers a durable, high-quality connection that harnesses the full capability of the SuperSpeed USB 3.0 standard. Designed for next-generation SuperSpeed USB device connections, this USB 3.0 for PCI-E Riser PCI E Express 1X to 16X Riser Card provides connectivity between a PC and hub or other USB A devices, delivering a throughput of up to 5Gbps when used with a USB 3.0 host and device - an astounding 10x the capability of USB 2.0 (480Mbps). Our 6ft USB 3.0 A to A device cable features high quality Shielded Twisted Pair (STP) construction, helping to prevent electromagnetic interference and ensuring reliable data communication. The 6ft USB 3.0 device cable is backed by our Lifetime Warranty, providing guaranteed quality and reliability.
The edge computing gateway BL300 series is designed according to the harsh industrial environment. It adopts industrial-grade microprocessor with a main frequency of up to 800Mhz, provides 512MB RAM and 8G ROM, pre-installed Linux and Ubantu operating systems, supports QT graphics tools and Node-Red, and is compatible with MQTT protocol, Modbus TCP protocol, OPC UA protocol, PLC protocol, etc. The edge computing gateway BL300 series provides a wealth of I/O interfaces, providing 1 isolated WAN port, 1 LAN port, 4 RS485, 1 CAN, 1 USB, 1 HDMI interface, 2 DI, 2 DO. The edge computing gateway BL300 series is a rugged and economical edge computer and an industrial IoT gateway. The metal shell ensures its EMC and EMI performance. It is small in size and supports DIN35 rail and wall installation. It is suitable for industrial IoT and industrial Automation Control applications.
Portable Port Expansion The STC USB-C to 3-Port USB-A Hub with Gigabit Ethernet is an essential companion for a computer with a USB-C or Thunderbolt 3 port. Instantly add 3 USB 3.0 ports and a Gigabit Ethernet network connection from a single USB-C port. This lightweight and portable USB hub adapter weigh less than 2 ounces with a six-inch cable tail that folds neatly beside the hub for storage or traveling.
Supports simultaneous programming of 4 chips. Remote control interfaces are reservedfor integration with third-party automatic programming systems andinformation systems. 64 modules can be controlled byautomatic system. Each computer can connect 2BeeHive304 to achieve 8 chipsprogramming at the same time. Supports USB and LAN(1Gbit/s)ports.
Wavetel 5G WiFi 6 CPE WNR3410 supports 5G NR(NSA&SA), LTE and WCDMA networks and is designed to deliver high-speed and low-latency wireless access to the residential and small businesses. WNR3410 has three 1GE LAN ports and one 1GE LAN/WAN port, and it supports WiFi6. Moreover, WNR3410 is also able to provide VoIP service to fully meet the needs of end users.
Wavetel 5G WiFi 6 CPE WNR3310 supports 5G NR(NSA&SA), LTE and WCDMA networks and is designed to deliver high-speed and low-latency wireless access to the residential and small businesses. WNR3310 has two 1G Ethernet ports and one 2.5G Ethernet port, and it supports WiFi6. Moreover, WNR3310 is also able to provide Voice service(VoLTE/CSFB/VoIP) to fully meet the needs of end users.
R10 is not only an industrial-grade router, but also supports programmable logic control, customized applications, and replaces PLC. Used as Modbus RTU/TCP Master to collect data, convert Modbus to MQTT protocol, Transmit Transparently (Pass-through), and directly connect to cloud platforms such as AWS\THINGSBOARD etc.
USB-C 16-IN-2 Multiport Docking Station Dual USB-C Host 1. Interface: USB-C Data+USB3.0 3+USB2.02+SD+TF+HDM 3+DP+USB-C PD+RJ45+SSD+Audio 2. USB-C Data: Support USB3.0 5Gbps speed tramsmission 3. USB3.0: Support USB3.0 5Gbps speed tramsmission 4. USB2.0: Support USB2.0 480Mbps speed tramsmission 5. SD/TF(Micro SD): Support SD, Micro SD, SD HC, SD XC and other memory cards,support 2T capacity and 104Mb/s speed 6. HDMI1: Support UHD 4K@60Hz video output 7. HDMI2: Support UHD 4K@60Hz video output (DP1.4) 8. HDMI3: Support UHD 4K@30Hz video output 9. DP: Support UHD 4K@60Hz video output 10. USB-C PD: Support 5V/9V/12V/14.5V/20V 5A Max 11. RJ45: Support 10/100/1000 Mbs(base-T) LAN. LED light for indication. 12. SSD. Support 5Gbps speed M.2 SSD enclosure
Industrial IoT Gateway BL110 is a rugged industrial IoT gateway, especially suitable for industrial IoT, for realizing IT and OT integration, OT and cloud platform communication. Industrial IoT Gateway BL110 used to convert Modbus, Modbus , DLT645, PLC, BACnet MS/TP, BACnet/IP and other industrial protocols to MQTT, OPC UA, BACnet/IP, Modbus TCP and other protocols. Industrial IoT Gateway BL110 provides 1 WAN, 1 LAN, 1 RS232, 3 RS485, 1 CAN interfaces, and also supports 4G wireless communication and GPS positioning functions. Industrial IoT Gateway BL110 has built-in multiple mainstream cloud engines, including AWS IoT, Thingsboard, SparkplugB, Aliyun, Huawei IoT, KPIIOT, etc., which can quickly access multiple cloud platforms at the same time. Industrial IoT Gateway BL110 also provides OPENVPN to ensure network security, supports TLS, SSL, X509 root certificate for data encryption functions, in addition, it also has the function of data reissue to ensure data integrity. In a word, the Industrial IoT Gateway BL110 can meet your needs for various industrial IoT applications.
ProfiNet IO Coupler BL200PN designed for industrial Real Time Ethernet, it adopts embedded Linux system, equips with Real-Time Ethernet interface chip and a dual-port memory supports two communication channels for Real-Time Ethernet equipped with PHY or fieldbus compatible with PROFINET fast SPI host interface with Read/Write functions. ProfiNet IO Coupler BL200PN supports dual network port cascade communication, and can support up to 32 IO modules, including AI, AO, DI, DO, RTD, TC, RS485, RS232, etc., ProfiNet IO Coupler BL200PN integrates a Network controller for fieldbus and Real-Time Ethernet slaves, suitable for creating a high-speed, stable and reliable Industrial Real-Time Ethernet networks and profinet fieldbus network. Saving wires and wiring cost, make it more easier and cost-effective to you industrial applications.
