The stereo hi-fi audio splitter(mb-shspb) allows one analog stereo hi-fi audio to be split into three hi-fi audio to transmitte via cat5e/6 cable.It can be connected passively to up to three receivers using muxboxs’s stereo hi-fi audio balun (mb-shfb) or active hi-fi audio receiver (mb-ashr) via cat5e/6 cable up to 3, 280ft.It is built in ground loop isolation prevents annoying "hum-bars" common noise with long distance installations.The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required.
Dual xlr(mb-dxlb) audio balun allows dual channels professional audio to be transmitted via cat5e/6 cable, up to 4, 200ft(1250m) in a point-to-point connection.It is built in surge suppressor to protect professional audio equipment against damaging voltage spikes.Its integrated ground loop isolation prevents annoying "hum-bars" common noise with long distance installations.The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required.Used in pairs, the prpfessional audio balun(mb-dxlr) eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment.
12101 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
The mb-ecb is one passive ethernet transmission that can transmit 10 base-t ethernet signal over one coax cable up to 642ft(196m).It allows any cctv ip camera or other ethernet devices to be connected within extended distance without power .With super interference rejection and high-end tvs for surge protection, mb-ecb can protect device from damange.In any harsh electrical areas.The device is often used in legacy installations where existing cable is re-deployed as part of an upgrade to ip cameras or other ethernet devices.Mb-ecb work in pairs .The transmission is extremely simple to use , with no ip or mac addressing required.
Mb-hd60i is a hdmi and ir signal extender that allows to transmit hdmi1.4a signal and bi-directional ir signal up to 197ft(60m) via one cat5e/6 cable, 480i hdmi signal up to 328ft(100m).It use advanced technology , supporting edid, cec, vesa ddc and hpd .The superior interference rejection and low emissions .Mb-hd60 allow hdmi1.4a signal to be transmitted in any harsh environment . It has built-in surge suppressor to protect hdmi equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality hdmi signal.So it is widely used in high definition advertising system, conference system, family entertainment and.
Description of low power high performance of low cost wifi module price
Dl2103b is designed as a wifi module based on atheros 4004 it has ultra-small
Size and supports smd the module works as an iot node and has been widely used
In iot appliances
Applications of low power high performance of low cost wifi module price
Smart gateway
Iot products
Consumer electronics
Smart home appliances
Industry control
Remote device monitoring
Features of low power high performance of low cost wifi module price
Support 2 4ghz 802 11b g n with sta ap mode
Support wep wpa wpa2 psk encryption mode
Support multiple network protocols
Option on board antenna or external antenna
Low power consumption
Ultra small size support smd
Support online firmware updating
Srrc authentication
Rohs compliant
Datasheet of low power high performance of low cost wifi module price
Wireless parameters
Wireless standard
802 11 b g n
Dl2106a is designed as a wifi module based on esp8266.It has ultra-small size and supports smd.The module works as an iot node and has been widely used in iot appliances.
Applications:
Smart plug
Intelligent home
Internet of things
Wireless control in industry
Wireless sensor & industrial control
Smart wearables
Light control
Features
•support 2.4ghz, 802.11b/g/n with sta/ap mode
•support wep, wpa/wpa2-psk encryption mode
•support multiple network protocols
•option on board antenna or external antenna
•low power consumption
•ultra small size. Support smd
•support online firmware updating
•srrc authentication
•rohs compliant
Dl2102a is designed as a wifi module based on atheros ar9331. It's a small size, highly integrated product with competitive price. This module can be easily integrated in iot products which need wifi features. It has been widely applied in iot appliances by large appliance enterprises, such as midea, changhong, hisense, etc.
Applications
Smart gateway
Iot products
Consumer electronics
Smart home appliances
Industry control
Remote device monitoring
Features
Support 2.4ghz, 802.11b/g/n with sta/ap mode
Support wep, wpa/wpa2-psk encryption mode
Support cable network
Support multiple network protocols
Support at+ instruction set for configuration
Option on board antenna or external antenna
Provide 1 uart and 4 gpio ports
Compact surface mount module 22mm x 44mm x 7.2mm, plug-in package
Single supply 3.3v operation
Support online firmware updating
Rohs compliant
Wifi-102 controller appeared, with the installation of controlling software on mobile devices like android & ios phones, tablet
Wifi-102 controller
Power supply dc cv smps
Input voltage dc12v-dc24v
Max current load max 3a*3
Output control flexibly control single color, cold warm color, rgb led lighting fixture
Control distance max 100m
Rgb color change mode 32 fixed modes, 8 diy modes
Scene mode 9
Working temperature -20~50
Dimension l127.6w73h44.5mm
Package size l135w80h50mm
Weight (g.W.) 290g
T1, t2, t3 remote control
Input voltage dc5v
(built-in lithium battery)
Working current 30ma
Working frequency 2.4ghz
Transmitting distance 30m
Battery capacity 1000mah
Standby time 6 months
Normal using time 30 days
Dimension l145w55h22mm
Package size l168w102h28mm
Weight (g.W) 200g
Software technical parameters
Platform android 2.1 or above, ios4.3 or above, with the wifi function
Size android(2.2mb), ios(3.4mb)
Language english
Category tool
Others free, plug-in-free.
Wifi-102 controller
Power supply dc cv smps
Input voltage dc12v-dc24v
Max current load max 3a*3
Output control flexibly control single color, cold warm color, rgb led lighting fixture
Control distance max 100m
Rgb color change mode 32 fixed modes, 8 diy modes
Scene mode 9
Working temperature -20~50
Dimension l127.6w73h44.5mm
Package size l135w80h50mm
Weight (g.W.) 290g
High availability, converged network services for Enterprise Distribution/Core or Service Provider networks.
We have large real stock of new and refurbished or used Cisco equipment and other network equipment. including Cisco routers, Cisco switches, Cisco firewalls, IP Phone, GBICs, GLCs, WIC NM network modules, memory & flash, cables, and network kits.
Model: S251
Name: GSM 3G Power Distribution Monitoring System
The GSM 3G Power Distribution Monitoring System is not only a smart power meter for measuring the power distributor voltage, current, factor, watts, frequency, active power, reactive power, when over current or exceed the pre-set value, will alarm immediately.
The GSM 3G Power Distribution Monitoring System can be used for monitoring the oil temperature, oil level of the transformers. GSM 3G Wireless Power Line monitoring.
The GSM 3G Power Distribution Monitoring System also can be used as a wireless security alarm system for the transformers, e.g.: theft-proof, fall down, and so on.
1. ARM® Cortex™-M4 32 Bit RISC Core, 72MHz inside, RTOS system;
2. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication;
3. Programmable by SMS Commands or PC Configurator via USB;
4. A/B/C phase power up it directly, Inbuilt large capacity rechargeable backup battery;
5. Suitable for three-phase four-wire system, input voltage: 100~400V, input current:0~5A;
6. Monitoring A/B/C 3 Phase input over current, over voltage , factor, watts, active power, reactive power exceeds alarm;
7. Power input PT,CT rate are programmable;
8. Accuracy of current, voltage is 0.2 class, power and watts is 0.5 class, sampling is 0.1seond.
9. Large internal memory can save 1000 event historical data;
10. 6 analog inputs, 16bits, supports 0-5V, 0-20mA, 4-20mA;
11. 2 digital outputs, 5A/30VDC,5A/250VAC, can be program to events or turn on/off by SMS;
12. 8 digital inputs, NC/NO/EOL type, when digital input recover can alert by SMS;
13. I/O ports with opto-isolated and lightning protection;
14. Provide one 5VDC@1A power for additional device;
15. Equips LCD to display the real time data and for programming;
16. 2 IP data centers, supports GDW 376.1—2009 protocol over GPRS/3G network;
17. 1 RS485 can be used as data transparent transmission for additional intelligent meters or PLC, with 15KV ESD protection;
18. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
19. 8 SMS Alert and auto dial numbers, can program to receive specified alarm message.
20. Automatically report its status to users by the specified time.
Model: S260 S261
Name: GSM GPRS 3G Temperature Logger
The GSM GPRS 3G Temperature Logger is special for remote monitoring temperature. it can setup ultra-high—high, low—ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly.
1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication;
2. Programmable by SMS Commands or PC Configurator via USB;
3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS;
4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS;
5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ;
6. Daily report, schedule upload, event upload;
7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status;
8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events;
9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center;
10. Internal memory, can save the historical data for review;
11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers;
12. Rechargeable Backup Battery inside can last 18hours;
13. Standard DIN Rail 35mm installation or outdoor enclosure.
Model: S262 S263
Name: GSM GPRS 3G Data Logger
The GPRS 3G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-high—high, low—ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly.
1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication;
2. Programmable by SMS Commands or PC Configurator via USB;
3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS;
4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS;
5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ;
6. Daily report, schedule upload, event upload;
7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status;
8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events;
9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center;
10. Internal memory, can save the historical data for review;
11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers;
12. Rechargeable Backup Battery inside can last 18hours;
13. Standard DIN Rail 35mm installation or outdoor enclosure.
Model:S270
Name:GSM GPRS Remote Controller
The GSM M2M RTU S270 is a remote terminal unit, special for remote monitoring and remote control. The RTU integrated industrial GPRS Module inside, it supports voice, SMS, and GPRS communications. Moreover, it integrated USB port for programming by user friendly PC software and upgrade firmware.
Model:S273
Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers)
The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
3. 4G SD card for save historical data, USB port for configuration and upgrade firmware;
4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;
5. 4 Relay outputs, 5A/30VDC,5A/250VAC;
6. 8 digital inputs, dry contact or level input. One of the input can be used as counter;
7. 1 temperature probe input, 1 humidity transducer input;
8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection;
9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;
10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert;
11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC;
12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
13. Supports remotely restart the RTU, and configure it by SMS commands remotely;
14. Supports over voltage protection and phase-reversal protection;
15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message.
16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
Features
Support USB3.0
Support 20MHz/40MHz/80MHz frequency
5G compatible with IEEE 802.11ac and IEEE 802.11a standard
2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard
Detect the network and change transmit speed automatically
Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption
Support WPS 2.0
Internal Omni-directional Antenna
Support 2.4G and 5G dual band
Support Wi-Fi Direct
Support Multiple BSSID
Support QoS-WMM, WMM-PS
Support WPS: PIN, PBC
Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes
Support Cisco CCX
Low consumption management
Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
Features
Support USB3.0
Support 20MHz/40MHz/80MHz frequency
5G compatible with IEEE 802.11ac and IEEE 802.11a standard
2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard
Detect the network and change transmit speed automatically
Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption
Support WPS 2.0
Internal Omni-directional Antenna
Support 2.4G and 5G dual band
Support Wi-Fi Direct
Support Multiple BSSID
Support QoS-WMM, WMM-PS
Support WPS: PIN, PBC
Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes
Support Cisco CCX
Low consumption management
Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
