PT-POS301GWS-AD is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. Designed for the PoE++ powered 60w poe switch Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, 60w poe switch supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. outdoor poe switch Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. outdoor poe switch operates with a wide input voltage of 44-57 VDC or 100-240Vac 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) PoE Switch for network camera Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-POS301GWS-AD Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc AC Input Voltage: 100 to 240 Vac Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV
POE Injector For IP Cameras PT-PSE100GF PT-PSE100GF is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32A amp. Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PoE Injector for wireless APs PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We are PoE Injector supplier and more information you can view here Parameter Description Key Features Part Number PT-PSE100GF Ports condition LAN Port*1,AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps PoE Injector Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 48Vdc User Port Power:15.4W Guaranteen Input Input Voltage: 100-240Vac Frequency: 50/60Hz Typ Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV Mechanical Characteristics Case: plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 134 X 56X 33mm Weight:170g(0.37lb) LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE, FCC
PT-PSE106GW is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. Household PoE Injector Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at compliant terminals. It supports 10/100/1000Mbps of data rates. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for camera Enclosed in an IP40 plastic case, designed for indoor use. It operates with input voltage of 100-240 Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). China Lighting Protection POE Specifications Parameter Description Key Features Part Number PT-PSE106GW Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af/at/bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6(+),1/2(-) Output Power Voltage: 55Vdc Output Power Current: 1100mA User Port Power: 60W Guaranteen Input AC Input Voltage: 100 to 240 Vac AC Input Current: 1.5A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 415gï¼?0.88lbï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @>30W â?¤60W Warranty 2 year Safety Approvals cUL / UL / CB / CE / FCC / PSE / SAA
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 36 to 72 Vdc DC Input Current: 2.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 380gï¼?13.4ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals CE/FCC
PT-PSE106GW-AR is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. PoE Injector supplier:Creative Lianjie Network Technology Co., Ltd Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. UL certification PoE operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter Description Key Features Wall-mounted PoE Injector Part Number PT-PSE106GW-AR Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input AC Input Voltage: 100-240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) AC Input Current:1.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 425gï¼?15.0ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals cUL/UL/FCC/CE/PSE/SAA/BIS
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year
PT-PSE105GWS-2D is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. PoE Switch for base stations Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Switch for Ethernet terminals Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. It operates with a wide input voltage of 44-57 VDC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) We also provide poe adapter, PoE Splitter for wireless APs PoE Switch for VoIP phone China Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-PSE105GWS-2D Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 104.2mmX 60mm Weight: 400gï¼?0.88lbï¼? LED Indicator PowerIndicator: Green PoE Load Indicator: Yellow SFP Indicator: Green Lan Indicator: Yellow Warranty 2 year Safety Approvals CE
PRODUCT INTRODUCTION: RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer. PRODUCT FEATURE: REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU. Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation. Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly. Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches ) Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed. Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
1. Overview 1G3F+WIFI+CATV series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH application provides data service access. 1G3F+WIFI+CATV series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT. 1G3F+WIFI+CATV series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X 1G3F+WIFI+CATV series is designed by Realtek chipset 9603C.
Mcc control cabinet Control cabinets according en 60-204/1, vde 0113 Cables 600/1000vac, in accordance with iec 60502 Circuit diagrams according to din 40719 Rated voltage 380/220vac tn-s Frequency 50hz + -0.5@ We shall design as your request, fabricate. According to the actual condition.
Control autoamtion equipment They are widly used in industrial fiedl to distribute power, or receive singal of other equipment and show the working data of othere equipment. At your request.Suit to export.
40G QSFP+ SR LR ER Transceiver Module XYT-QSFP-40G-SR4 XYT-QSFP-40G-LR4 Cisco XYT-QSFP-40GE-LR4 Compatible 40GBASE-LR4 QSFP+ 1310nm 10km LC DOM OTN OTU3, 40G Ethernet, Infiniband, FiberChannel, SATA/SAS3, MSA Compliant Cisco QSFP-40GE-LR4 is supported on a wide range of Cisco equipment. FS S5850-32S2Q Switch Cisco Nexus 2000 N2K-C2248PQ Cisco Nexus 9000 N9K-X9432C-S Cisco Nexus 9000 N9K-C9372TX-E Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-M6PQ Cisco Nexus 9000 N9K-X9432PQ Cisco Nexus 9000 N9K-C92160YC-X Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 9000 N9K-X9564TX (uplinks) Cisco Nexus 3000 N3K-C3016Q Cisco Nexus 9000 N9K-X9736PQ Cisco Nexus 9000 N9K-C9332PQ Cisco Nexus 9000 N9K-X9464PX Cisco Nexus 3000 N3K-C3064T FS S5850-48S6Q Switch Cisco Nexus 6000 N6K-C6004-M12Q Cisco Nexus 3000 N3K-3132Q Cisco Nexus 3000 N3K-3172PQ FS S5850-48S2Q4C Switch Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-X9636PQ Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 6000 N6004-96Q Cisco Nexus 9000 N9K-C9336PQ Cisco Nexus 3000 N3K-C3064PQ-10GE Cisco Nexus 3000 N3K-C3164Q Cisco Nexus 3000 N3K-C3064-32T Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 7000 N7K-F312FQ-25 Cisco A9K-MPA-2X40GE Cisco Nexus 9000 N9K-C93120TX Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 5000 N5K-C56128P Cisco Nexus 3000 N3K-3172TQ Cisco Nexus 9000 N9K-C9372TX Cisco Nexus 5000 N55-M4Q Cisco Nexus 9000 N9K-M6PQ-E
25G SR,LR SFP28 optical transceiver with the features of IEEE802.3by, SFF-8472 low consumption and high reliability,suitable for data center,25G Ethernet and fiber channel. ModelRateWavelengthTransmission distanceTransmitter powerReceiver sensitivityInterface XYT-SFP28-LR-10KM25Gb/s1310nm10KM-1.5~2â?¤-13.3Duplex LC XYT-SFP28-ER-40KM25Gb/s1310nm40KM-1.6~6â?¤-19.6Duplex LC XYT-SFP28-BiDiLR-10KM25Gb/s1270nm/1310nm10KM-3~3â?¤-13Duplex LC XYT-SFP28-LWDM-40KM25Gb/sLWDM40KM-1.6~6â?¤-19Duplex LC XYT-SFP28-CWDM-10KM25Gb/sCWDM10KM-1.5~2â?¤-13.3Duplex LC XYT-SFP28-DWDM-10KM25Gb/sDWDM10KM-1.5~2â?¤-13.3Duplex LC
Techwin vector network analyzer for manufacturing wireless device We will try our best to provide products similar to Keysight like X-series vector network analyzer(MXG, EXG,CXG), Rohde & Schwarz vector network analyzer like R&S FSW Signal and Spectrum Analyzer and R&S FSWP Phase Noise Analyzer and VSO Tester, Tektronix vector network analyzer like RSA5000B Real Time Spectrum Analyzer, Anritsu vector network analyzer like MS2090A Field Master Pro and MS2720T Spectrum Master. You will probably see us at the following exhibitions: EUMV in Europe , IMS in USA, MWC in Spain, EMV in Germany and so on. Product Overview: Techwin TW4650 series vector network analyzer is consist of 10MHz13.5GHz, 10MHzï½?26.5GHz and 10MHzï½?43.5GHz. Techwin TW4650 series reduces cost and enhances price-performance ratio but still maintains the same critical technical specifications with those of high performance instrument, such as sweep speed, dynamic range etc. Techwin TW4650 series offers multiple calibration types including frequency response, single port, response isolation, enhanced response, full dual-port and E-cal. Multiple display types are embedded like logarithm amplitude, linear amplitude, standing-wave, phase, group delay, Smith chart, polar coordinates. Many standard interfaces are available including USB, LAN, GPIB, VGA etc. They can precisely measure characteristics of amplitude-frequency, phase-frequency, and group delay and so on. Main Features: Flexible calibration types, compatible with multiple cal kits Support complicated testing solutions with many windows, multiple channels and fast operation Multiple display types like logarithm amplitude, linear amplitude, standing-wave ratio, Smith chart etc With USB, GPIB, LAN and VGA English operation interfaces, 12.1 inch 1280*800 high-resolution multi-point touch screen Record/Run, one-button operation simplifies measurement setup and improves working efficiency Functions: Flexible calibration types, compatible with multiple calibration kits Techwin TW4650 series vector network analyzer can give you various calibration types, including guided calibration (auto cal), non-guided calibration (using mechanical cal kits for through response, through response and isolation calibration, single port calibration, enhanced response calibration, full dual-port SOLT calibration, TRL calibration), ECal. Different cal kits can be selected, like coaxial calibration kits or ECal kits, according to actual measurement needs, to make measurement easy for devices of diversified interfaces. â?¢ Multiple windows display all measurement channels The analyzer supports up to 64 channels and displays up to 32 measuring windows simultaneously, with up to 16 trace curves displayed in each window at the same time, allowing more visual observation and more convenient operation.
J4858D 1G SFP LC SX 500m OM2 MMF Transceiver J4859D 1G SFP LC LX 10km SMF Transceiver J4860D 1G SFP LC LH 70km SMF Transceiver J4858C X121 1G SFP LC SX Transceiver J4859C X121 1G SFP LC LX 1310nm 10km DOM Transceiver J4860C X121 1G SFP LC LH Transceiver Please do not hesitate to contact me if you have any further questions. Thanks! Helen Newstar Networking Technology Co., Ltd.
Product Overview G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station. Features Be tallied with HART7.0 HART master and Modbus slave mode 4~20mA analog signal overlay HART digital signal Support 15 HART slave device Configure gateway by special software Write protect user data RS485 Modbus interface LED power and communication indicating Standard DIN rail installation
Product Overview M0310 module makes it possible to convert Modbus RTU protocol directly to HART protocol. Using M0310 module, the difficulty of development can be reduced and the upgrade of Modbus RTU device can be easily achieved. Only by simply configuration, the users can realize conversion from Modbus RTU protocol to HART protocol. M0310 module is provided with two LED indicating lights, used to indicate the current working status. Features Comply with HART PROTOCOL standard V7.0 HART slave station and Modbus master station form Support 1 Modbus RTU slave device Support 6 device variables,4 dynamic variables Configured by HART interface Write-protection of users data Support high/low current transfinite alarm TTL Modbus interface LED power and communication indicator
MODBUS-RTU master station, comply with MODBUS-RTU protocol Electrical interface connected with Modbus device supports TTL level Set MODBUS-RTU slave station via parameters provided by GSD file Company Information Microcybers production center is 1700m2, with anti-static ground, ventilating system, air source transporting system, temperature and humility control system and production devices. The production center consists of 4 workshops and 1 professional lab, they are: production workshop, assembly workshop, ageing workshop, maintenance workshop and product lab. There are professional production line, pressure transmitter assembly line, instrument assembly line, control system module assembly line and product testing line. Microcyber has the batch capacity for 10 thousand devices per year.
Provide FF H1 communication ability to Modbus device Support standard DD or EDD specification (FF H1) Electrical interface connected with Modbus device supports TTL level, RS485 and RS232 G0313 Modbus to FF Gateway is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output. G0313 Modbus to FF Gateway size is 99Ã?22.5Ã?114.5mm, and supports standard DIN rail installation. There is a 3-bit DIP switch for G0313 Modbus to FF Gateway, shown as the following Figure. SIM: Simulation switch, used for simulation function. WP: Write protection, all the write operation for FF smart pressure transmitter shall be refused, which avoid data modification at random. RST: Reset, reset device date to factory original. Power off the device at first, and made the switch at ON, and then power on the device, the device shall be reset to factory original. Modbus to FF gateway is a gateway device supporting Modbus and FF protocol. As FF device, it can communicate with Modbus devices, read Modbus data to FF device by simply configuration, and transfer data to control system through FF bus. Modbus to FF Gateway supports 4 Modbus slave devices, 8 groups of analog input output and discrete input output parameters, totally 32 channels provided. It configures Modbus devices data into transducer blocks parameters via Modbus register, and provides data support for FF system via channels between variables and AI, AO, DI and DO function blocks.
Product Overview M0313 module makes it possible to convert Modbus RTU protocol directly to FF H1 protocol. Using M0313 module, the difficulty of development can be reduced and the upgrade of Modbus RTU device can be easily achieved. Only by simply configuration, the users can realize conversion from Modbus RTU protocol to FF protocol. M0313 module is provided with two LED indicating lights, used to indicate the current working status. Features Support 1 Modbus RTU slave device 1 RES function block complying to FF specification 1 Modbus transducer block 4 PID function blocks complying to FF specification 4 for each AI,AO,DI,DO function block complying to FF specification, each function block supports 8 channels Modbus RTU device upgrading LED working status indicator
