Battery Type: Lithium thionyl chloride battery Battery Brand: VCELL/OEM Model: ER34615 Nominal Voltage: 3.6V Nominal Capacity: 14500mAh Discharge Cut-Off Voltage: 2.0V Max constant discharge current: 2000mAh Max. Pulse discharge current: 4000mAh Work temperature: -60 -85 Self-discharge rate: 10 years Wire/Connector: TBD
The 10KA MCB features an elegant and distinctive design, offering dual protection against both short-circuits and overloads. Feature of JVM66-63-C 10ka MCB Notable for its fine and distinctive appearance. Provides dual protection against both short-circuits and overloads. Boasts an impressive high-breaking capacity of 10KA, surpassing similar products worldwide. Features a distinct label and a transparent window for added convenience. Offers a convenient and dependable installation method. Specification of JVM66-63-C 10ka MCB Model: JVM66-63-CPole No.:1P, 2P, 3P, 4P Rated current:1,2,3,4,6, 10,13,16ï¼?20,25,32,40,50,63ARated working voltage:240/415V Rated frequency: 50/60Hz Rated frequency (miniature circuit breaker):400VCurve (miniature circuit breaker):B,C,D High short-circuit breaking capacity:10000A(10KA) lnstantaneous tripping current:5In (B type)10In (C type) 20In (D type) Instantaneous non-tripping current:3In (B type) 5In(C type)10ln(D type)Mechanical life:10000 times Degree of protection: IP20wiring mode:Front wiring Connecting conductor:Up to and including 16m2Wiring height:21.5mm
DDS5558 Single Phase Meter is a kind of new style single phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has minimum size, and also a new single phase two wire active energy meter. It has already passed the test of the international authority CE. The meter completely accords with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has white backlight source eight digits LCD monitors shows the active energy power consumption. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc. Features: Bi-directional total active energy measurement 25mm standard DIN rail installation, complying with standard DIN En50022. Single pole width (Modules17.5mm), complying with standard DIN43880. Small modular size, DIN rail mounted. Easy installation to distribution boards, load center, miniature & etc. by identifying where energy is being used. Application: All power parameter measurements; Energy measurement and electrical fire monitor and control; Replacing the three-phase power meter, three-phase electricity transmitter; Transformers, generators, capacitors, and electric motors distributed detection; Medium and low-pressure systems; SCADA, EMS, DCS integrators.
DCM3366D series electronic DC energy meter is a new generation product produced by our company. It adopts a liquid crystal display and has an RS485 communication function for data exchange with a microcomputer. It is suitable for power measurement and energy metering of DC signal equipment such as batteries and solar panels. It can also be used in modern supply and distribution DC systems such as industrial and mining enterprises, civil buildings, and building automation. It is composed of a measurement unit, data processing unit, communication unit, display unit, etc., and has the functions of electric energy measurement, data processing, real-time monitoring, and LCD. The electric energy meter has the characteristics of high overload, high accuracy, low power consumption, automatic saving of power outage data, and long life. Rated voltage (Un): DC100V, DC300V, DC500V, DC1000V Rated current (Ib): 50A, 100A, 200A, 300A, 500A, etc. can be set (maximum measured value 4800.0000A), using an external 75mV shunt input Auxiliary power supply: power supply voltage, DC20Vï½?60V or AC85ï½?265V/DC85ï½?330V optional Working temperature range: -25â??ï½?60â?? Dielectric strength: Voltage/power supply/casing: 3.0kV/min Communication/power supply: 3.0kV/min Static electricity immunity: contact discharge 8 kV, gas discharge 15 kV Electrical fast burst immunity: 4kV Surge immunity: 2kV/4kV
High Quality:This female car cigarette lighter extension cable is made of the good material which are stable and durable. It can be used for long time with outstanding experience. The cigarette lighter extension socket is fitted with a 10A fuse to prevent any potential equipment damage caused by excessive surge currents. Widely used,Compatible with all vehicles powered by DC12V the red clip is used to connect the positive and the black clip is used to connect the negative. cable length(approax):47.2inch/4ft,weight(approax):4.2ounces
Battery Type: Lithium thionyl chloride battery Battery Brand: VCELL/OEM Model: ER14505M Nominal Voltage: 3.6V Nominal Capacity: 1800mAh Discharge Cut-Off Voltage: 2.0V Max constant discharge current: 400mA Max. Pulse discharge current capability: 1000mA Work temperature: -60 -85 Self-discharge rate: 10 years
Switch Rail Clamp Scope of use of portable hook lock: 1. Lock switch when repairing switch signal switch machine. 2. Lock the switch when passing the special train. 3. When temporary power failure occurs, the train runs and locks the switch. 4. Closed special line lock special line turnout. 5. Line new switch lock new open switch open. 6. Lock the switch during the construction of the special line. Specification Model LJ-GSQ Type Switch Rail Clamp Material Stainless Steel Dimensions (L x W x H) (40*15cm Weight 2kg
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP505573 Nominal Voltage: 3.7V Nominal Capacity: 2500mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 500mA Max charge current: 2.5A Standard discharge current: 500mA Max continuous discharge current: 3.75A Peak discharge current: 12.5A(less than 3S ) Charge temperature: 0~45 Discharge temperature: -20~60 Size(T*W*L): 5.2*55.5*75.5mm Max Weight: 44.0g Approx Cycle life: over 700 times Wire/Connector: TBD Application: GPS, baby monitor, smart watch, dash cam, mobile power, VR glasses, beauty devices, pet tracker,etc
1. Screen size: 15.6 inches (IPS display), resolution: 1920*1080 2. Realistic reproduction: The tip of the pen is on the same path as the cursor, and there is no optical illusion when drawing. The nib uses a special technology to truly restore the delicate friction between the nib and the screen, just like drawing on paper. 3. Color: 167,000 colors are layered, more rich and delicate. There is no chromatic aberration, effectively improving image details, and the color quality is accurately restored due to the combination of the FHD screen and the 120% sRGB coverage of the screen color gamut. 4. Convenience: No need for battery or charging, support natural tilt of plus or minus 60° 5. Comfort: Easy to adjust to a comfortable angle, ergonomic design, the stand is adjustable and foldable, everyone can find their best angle.
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP802530 Nominal Voltage: 3.7V Nominal Capacity: 520mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C( less than 3S ) Charge temperature: 0~45â?? Discharge temperature: -20~60â?? Size(T*W*L): 8.2*25.5*32.5mm Max Weight: 9g Approx Cycle life: over 700 time Wire/Connector: TBD
The wall-mounted AC/DC new energy vehicle charging pile is an advanced charging device designed to provide efficient and convenient charging solutions for new energy vehicles. This type of charging post has a flexible installation method that can be easily mounted on the wall, and combines both AC and DC charging functions to meet the charging needs of different types of new energy vehicles. First of all, the wall-mounted design of this charging post makes it more efficient in terms of space utilization, and it is suitable to be mounted on the wall of a home, parking lot, or commercial area, which saves floor space and improves ease of use. Users can customize the installation according to their needs and site conditions to meet their individual needs. Secondly, wall-mounted AC/DC new energy vehicle charging piles combine AC and DC charging functions to provide wider compatibility with different types of electric vehicles and support fast charging, shortening charging time and improving charging efficiency for users. In addition, this kind of charging post usually has intelligent management system, which can be remotely monitored and operated through cell phone app or the Internet to check the charging status and adjust the charging power in real time, providing users with more convenient charging experience. Overall, wall-mounted AC/DC new energy vehicle charging piles provide strong support for promoting the popularization and use of new energy vehicles through their flexible installation, multi-functional charging features and intelligent management system. Their customized installation, efficient charging and intelligent management will bring users a more convenient and reliable charging experience and promote the healthy development of the new energy vehicle industry.
The wall-mounted AC/DC new energy vehicle charging pile is an advanced charging device designed to provide efficient and convenient charging solutions for new energy vehicles. This type of charging post has a flexible installation method that can be easily mounted on the wall, and combines both AC and DC charging functions to meet the charging needs of different types of new energy vehicles. First of all, the wall-mounted design of this charging post makes it more efficient in terms of space utilization, and it is suitable to be mounted on the wall of a home, parking lot, or commercial area, which saves floor space and improves ease of use. Users can customize the installation according to their needs and site conditions to meet their individual needs. Secondly, wall-mounted AC/DC new energy vehicle charging piles combine AC and DC charging functions to provide wider compatibility with different types of electric vehicles and support fast charging, shortening charging time and improving charging efficiency for users. In addition, this kind of charging post usually has intelligent management system, which can be remotely monitored and operated through cell phone app or the Internet to check the charging status and adjust the charging power in real time, providing users with more convenient charging experience. Overall, wall-mounted AC/DC new energy vehicle charging piles provide strong support for promoting the popularization and use of new energy vehicles through their flexible installation, multi-functional charging features and intelligent management system. Their customized installation, efficient charging and intelligent management will bring users a more convenient and reliable charging experience and promote the healthy development of the new energy vehicle industry.
Battery Type: Lithium Polymer Battery Battery Brand: VCELL/OEM Model: VP401230 Nominal Voltage: 3.7V Nominal Capacity: 120mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 Wire/Connector: TBD
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP652030 Nominal Voltage: 3.7V Nominal Capacity: 350mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 Wire/Connector: TBD
Battery Brand: VCELL/OEM Battery Type: Lithium Ion Battery(NCM) Model: ICR14650-1100 Nominal Voltage: 3.7V Nominal Capacity: 1100mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 3.0C Peak discharge current: 5C(700
Battery Type: LiFePo4 Battery Brand: VCELL/OEM Model: IFR32700 Nominal Voltage: 3.2V Nominal Capacity: 6000mAh Charge Cut-off Voltage: 3.65V Discharge Cut-Off Voltage: 2.0V Max Continuous Discharge Current: 3C Max Plus Discharge Current: 5C Weight: Approx 185g Size: Max 32.5*70.8mm
EV DC charger, overall dimensions 700*240*1800(mm), floor standing installation method, wiring mode down in and up out, output mode Single/Double connector, liquid cooled cable, 5M cable (optional); input frequency 45-65HZ, output voltage 200-750V/200-1000V, input voltage AC 380V �±20%, metering accuracy Level 0.5, single connector output current 0-500A/0-800A, double connector output current 0-1000A/0-1600A; current limiting protection â?¥ 110%, efficiency â?¥94%, steady current accuracy ±1%; interface 7 inch LCD color touch screen, LED indicator, working temperature -25â??--+50â??, operating humidity 5%-95% frost free, protection level IP54; cooling method forced air cooling, noise control Terminal noiseless.
EV DC charger, overall dimensions 700*240*1800(mm), floor standing installation method, wiring mode down in and down out, output mode Single/Double connector, liquid cooled cable, 5M cable (optional); input frequency 45-65HZ, output voltage 200-750V/200-1000V, input voltage AC 380V �±20%, metering accuracy Level 0.5, single connector output current 0-500A/0-800A, Double connector output current 0-10000A/0-1600A; current limiting protection â?¥ 110%, interface 7 inch LCD color touch screen, LED indicator, working temperature -25--+50, operating humidity 5%-95% frost free, protection level IP54; cooling method forced air cooling, noise control Terminal noiseless.
EV DC charger, energy vehicle 360-720KW, floor standing installation method, wiring mode down in and up out, output mode Double/Four/Six/Eight/Ten/Twelve etc connector, input frequency 50HZ ±10%, output voltage 200-750V/200-1000V, input voltage AC 380V �±15%, metering accuracy Level 0.5, single connector output current 0-250A, current limiting protection â?¥ 110%, interface 7 inch LCD color screen, LED indicator, working temperature -25--+50, operating humidity 5%-95% frost free, protection level IP54; cooling method forced air cooling, noise control 65dB.
EV DC charger, energy vehicle DC 320KW, floor standing installation method, overall dimensions 700*600*1900(mm), wiring mode down in and up out, output mode double connector, 5M cable, input frequency 45-65HZ, output voltage 200-1000V, input voltage AC 380V �±20%, metering accuracy Level 0.5, current limiting protection 110%, interface 7 inch LCD color screen, LED indicator light, working temperature -25 --+50 , operating humidity 5%-95% frost free, protection level IP54; cooling method forced air cooling, noise control 60dB.
