Type: Lifepo4 Battery Rated Volt:51.2V rated capacity: 300Ah Energy:10KWH regular discharging current:60A rated discharging current: 150A a max. discharging current: 200A recommended charging current:50A lifecycle: 5000cycles warranty:3years
Type: Lifepo4 Battery Rated Volt:12.8V rated capacity: 100Ah regular discharging current 20A rated discharging current: 50A max. discharging current: 100A recommended charging current:20A lifecycle: 5000cycles warranty 3years Brand: Takum
Type: Lithium Battery Rated Volt:12V Rated capacityï¼?50Ah regular discharging current:10A rated discharging current: 25A Max.discharging current: 50A recommended charging current: 10A
PH meter Description Online pH / ORP meters and pH / ORP controllers are one of the most common water quality analysers in use today in water treatment and process plants and yet online pH / ORP meters cause continual problems for their operators. What is needed is a stable, reliable, online pH/ ORP analyzer for a reasonable cost. That is exactly what you get with the BOQU Instrument. A pH and ORP meter consist of a pH or ORP sensor, transmitter and process adaption, combined to best suit your pH control needs. The online ORP meter from BOQU Instrument provides accurate process pH measurements in a wide range of environments, from ultra pure water to hygienic measurements in a bioreactor to dirty chemical production. Our Advantages 1ã??Stable, Reliable,Precision,Continuous measurement pH,ORP and Temperature. 2ã??Instrument for panel mounted,wall mounted,pipe mounted. 3ã??2 ways of 4-20mA and standard RS485 Modbus RTU 4ã??Instrument provide High/Low control relay 5ã??Local Data logger function for 1000 times 6ã??Application:industrial waste water, drinking water environmental monitoring, ultra pure water,fermentation, food production process etc. If you need our online ph meter, you can contact us through our online chat window.
Online pH / ORP meters and pH / ORP controllers are one of the most common water quality analysers in use today in water treatment and process plants and yet online pH / ORP meters cause continual problems for their operators. What is needed is a stable, reliable, online pH/ ORP analyzer for a reasonable cost. That is exactly what you get with the BOQU Instrument. A pH and ORP meter consist of a pH or ORP sensor, transmitter and process adaption, combined to best suit your pH control needs. The online ORP meter from BOQU Instrument provides accurate process pH measurements in a wide range of environments, from ultra pure water to hygienic measurements in a bioreactor to dirty chemical production.
AIT1000-SG has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. The multi-point zero-flux technology system secures the high accuracy by utilizing thetechnologycombination of exciting magnetic flux closed-loop control, self-excited magnetic fluxgateandmulti-closed-loop control that realizes the closed-loop control between excitation magnetic fluxandAC/DCmagnetic flux generated by primary current, while the high-frequency ripple sensing channel allowsthesensor to have the high performance over the full bandwidth range.
Battery Brand: VCELL/OEM Battery Type: LiFePo4Battery Model: IFR26650 Nominal Voltage: 3.2V Nominal Capacity: 3600mAh Charge Cut-Off Voltage: 3.65V Discharge Cut-Off Voltage: 2.0V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 3.0C Peak discharge current: 5C(2500 times
Insulating conduit is a tubular material used in electrical installations to protect wires and cables, preventing electrical short circuits or leakage. It is made from materials with high electrical insulation properties,effectively isolating electrical wires and cables from other conductive bodies or environmental factors that could cause damage. Besides providing electrical insulation protection, insulating conduit also offers certain levels of waterproofing, dustproofing, and corrosion resistance, ensuring the safe operation of electrical systems. Quality Control Measures for Insulation Casing The following are several important aspects of quality control in the production of silicone coated fiberglass sleeve and heat shrink tube sleeve and custom bulk silicone tubing: 1. Raw material inspection Raw material quality: Strictly inspect the quality of incoming raw materials (such as PVC, PTFE, silicone rubber, etc.), including physical properties, chemical stability, etc., to ensure that the raw materials meet production requirements. 2. Production process control Process parameter monitoring: Precise control of extrusion, vulcanization and other process parameters (such as temperature, pressure, speed, etc.) to ensure the stability of the production process and product consistency. Online inspection: Set up inspection points on the production line to monitor the appearance, size, thickness, etc. of the insulation sleeve in real time, and timely detect and correct production deviations. Equipment maintenance: Regularly maintain and calibrate production equipment to ensure its normal operation and production accuracy. 3. Finished product inspection Physical performance testing: Conduct physical performance tests on the finished product, such as tensile strength, elongation, and bending performance, to ensure compliance with design requirements. Electrical performance testing: Conduct insulation strength, voltage withstand tests, etc. to verify the electrical performance of the insulation sleeve. Environmental adaptability testing: Conduct high and low temperature tests, humidity and heat aging tests on insulation sleeves to evaluate their performance stability under different environmental conditions.
SMC/SPA Series SCR SNUBBERING CAPACITOR SMC/SPA series is special designed for the filtering, over-voltage protection, and damping absorption of semi-conductors, rectifiers, and thyristors in power electronic equipment. The self-healing capacitor elements are enclosed in a cylindrical aluminum/plastic case sealed with PU resin. They are made of metallized PP film, This enables the unit to carry high peak and high inrush currents with low self-inductance and series resistance. Dry type design, environmentally friendly and self-healing, support both horizontal and vertical installation.
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP073538 Nominal Voltage: 3.7V Nominal Capacity: 850mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 times
HCV series high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and variousirregular waveforms under the condition of complete isolation of the primary side and the secondary side. Itis mainly used in the field of measurement verification and measurement calibration that requires highaccuracy, and rail transit, power quality analysis, power analyzer, medical, aerospace, missile, ship andother fields that require high sensitivity, high stability and high reliability.
BMS500 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current flows, the primary current is measured by detecting the symmetry of the saturation point. The BMS series is suitable for battery monitoring systems that require high accuracy and low offset. It can realize the isolation measurement between the primary current (high voltage) and the secondary current (12V system). PHEV and EV system may use different technologies of batteries. One very important parameter that mayinfluence the stability of the SOC is the temperature. The battery temperature affects vehicle performance, reliability, safety and lift-cycle cost. The BMS500 series is qualified between -40 to 85 but the transducer shows a better accuracyinarestricted temperature range in order to deliver a very accuracy current measurement.
3PEAK is committed to the research and development of high-performance, high-quality, and highly reliable integrated circuit products, including signal chains, power analog chips, mixed-signal front-ends, and embedded processors to provide customers with all-around solutions. The applications of the products cover many fields such as communication, industrial, consumer and the automotive industry. Established in 2008, 3PEAK was listed on the SSE STAR Market on September 21, 2020. 3PEAK has Headquarters in Suzhou, China and Plano, Texas, USA. For more information about tpc2190 and tpc5120q, please feel free to contact us!
Insulator: PPS UL94V-0 Sleeve: Brass CuZn36Pb3 (C3600) Contact Clip: Beryllium Copper(C17200) Current Rating: 1A Contact Resistance 10m Dieelectric Strentha 500v Color Black
Insulator: PPS UL94V-0 Sleeve: Brass CuZn36Pb3 (C3600) Contact Clip: Beryllium Copper(C17200) Current Rating: 1A Contact Resistance 10m Dieelectric Strentha 500v Color Black
Insulator: PPS UL94V-0 Sleeve: Brass CuZn36Pb3 (C3600) Contact Clip: Beryllium Copper(C17200) Current Rating: 1A Contact Resistance 10m Dieelectric Strentha 500v Color Black
Insulator: PPS UL94V-0 Sleeve: Brass CuZn36Pb3 (C3600) Contact Clip: Beryllium Copper(C17200) Current Rating: 1A Contact Resistance 10m Dieelectric Strentha 500v Color Black
Insulator: PPS UL94V-0 Sleeve: Brass CuZn36Pb3 (C3600) Contact Clip: Beryllium Copper(C17200) Current Rating: 1A Contact Resistance 10m Dieelectric Strentha 500v Color Black
Battery Specification 2000mah lithium ion battery 10c for power tools, full capacity, high cycling, low internal resistance and ultra-low self-discharge to meet the requirements of your power products. Capacity 2000 mAh Minimum Capacity 1980 mAh Discharge Rate 10C Nominal Voltage 3.7V Internal Resistance 17ml Cycle Life 500 Charge Voltage 4.2V0.03V Charge Current 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current 20000mA Operating Temperature Range Recharge (0-45C) Discharge (-20-60) Long time Storage Temperature -20~25C Initial Size Diameter:18.15+0.20mm Height:65.0-0.50mm
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Smart Ring Battery Nominal Voltage: 3.8V Nominal Capacity: 24mAh Model: VP150732 Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Max charge current: 1.0C Max continuous discharge current: 1.5C Peak discharge current: 5C Cycle time: More than 700 times
