Active coal is a porous highly adsorptive form of carbon used to remove colour or impurities from liquids and gases, in the separation and extraction of chemical compounds, water purification and in the recovery of solvents. According to different shapes, It can be divided into granular activated carbon, pellet carbon & powder activated carbon.
The full name of the coal burning lime kiln is fully automatic mechanized coal burning vertical steel-shell lime kiln, and Kiln type is vertical cylindrical.The fuel for the equipment is mainly solid fuel, such as coke, bituminous coal, anthracite, briquette.
Vertical coal mill is typically designed to process materials in medium hardness, like soft coal or bituminous coal, and it is mainly used in positive pressure pulverizing system of soft coal. It is widely used in thermal power plant, metallurgy sector, building material industry, chemical industry, etc. The coal pulverizer is an ideal device that integrates crushing, drying, grinding, and grading conveying all together.
Coal Briquette Binder Large Quantity
Coal Briquette Binder binder powder
Coal Briquette Binder
Supply Carbon raiser CAC/Calcined anthracite coal: FC: 85%, 88%, 90%, 91%, 92%, 93%, 94%, 95%, Sulfur: 0.3%, Ash: 3.5%-18%, VM: 1.5%, Moisture: 0.5%max, Size: 0-1mm, 1-5mm or as required.
Coal Auger Bits Type D(mm) Tips Shape d(mm) JLCAB 38-12 38 Straight 12 Inclined Short JLCAB42-12 42 Straight Inclined Short Blade Cut Bits Type Dimension(mm) L H l JLFCB65/38(13#) 132 38 65 JLFCB75/40(23#) 140 40 75 JLFCB100/50(55#) 202 50 100 Conical Bits Type Dimension(mm) L l D d JLRCB152-50(U82) 152 80 50 30 JLRCB195-55(U92) 195 102 55 35 JLRCB146-50(U84) 146 70 50 30 JLRCB182-55(U94) 182 88 55 35 JLRCB162-50(U85) 162 85 50 30 JLRCB183-55(U95) 183 89 55 35 JLRCB138-50(S120) 138 64 55 30 JLRCB142-55(S100) 142 66 45 34 JLRCB134-44(U76) 134 70 44 25 JLRCB152-44(U118) 152 75 44 30 JLRCB156-60(U150) 152 76 60 38
Capability:0.3-4.0 ton/ h Power:20-140 kW Dry Material Moisture(%):12-15%(Adjustable) Heat Source: Suitable for biomass, steam, natural gas, and other heat sources Application: Widely used for drying all kinds of coal, lignite, carbon coal, including anthracite, lean coal and poor lean coal, lean coal, coking coal, fat coal, air fertilizer coal, gas coal, etc. Product Description Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution etc.,which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining and other small particles or weakly caking dry powder material.
Zhengzhou Dingli New Energy Technology Co., Ltd is the most professional, most authoritative enterprise in China, which is engaged in coal drying equipment research and development, which is the only Chinese coal slime drying industry set design, production, sales in the integration of science and technology enterprises. After nearly 20 years of rapid development, Dingli has gradually become the first brand of the Chinese drying equipment industry in China. Our company based on the lignite, washed coal such as high moisture content coal, with the carefully technical research and practice, developed the coal rotary drying drum system,After 20 years drying experience and constantly improvement in the equipment design, with its advanced technology, high efficiency, low energy consumption, stable operation, convenient operation and maintenance, security, environmental protection,the product are well received by users, more than 100 sets of coal drying equipment running in China and all over the world. This type of equipment can be used for drying all kinds of coal, lignite, carbon coal, including anthracite, lean coal and poor lean coal, lean coal, coking coal, fat coal, air fertilizer coal, gas coal, coal and weakly caking coal, not sticky coal, long flame coal, lignite, coal washing, screening, raw coal, bituminous coal,the tail coal, midding coal, etc. Equipment can be made according to the customers' requirements.
Product properties 1high purity - control the consistency of raw material from the mine resource. - introduce automatic whole-process equipment to ensure product consistency. 2 good performance - increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3fine classification - various product category, to provide customized carbon raising scheme 4cost-saving - reduce the usage amount of iron, increase scrap consumption, and save raw material cost. How to use 1for 1-5 t furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. Which can make carbon additive fully absorbed. 2for greater than 5 t furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
Ningxia biyuan activated carbon co., ltd. Sells carbon additive for sale anthracite coal for metallurgy carbon additive carbon, which is finished by series production process. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, product features and application range: high fixed carbon content, low sulfur content, stable oil effect, high carbon absorption rate, degree of graphitization the best is to increase the nucleation of molten iron, which is mainly used for smelting cast steel and cast iron. Ningxia biyuan activated carbon co., ltd. Is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Scope Kerosene smoke point tester is based on the standard gb / t382-83 (91) "determination of the smoke point of kerosene" design and manufacture. The maximum height for the determination of the lamp with kerosene and jet fuel smoke point, that the sample in a standard fixture, smokeless flame under specified conditions of, expressed in millimeters. Features 1, kerosene smoke point tester uses millimeter scale background, you can clearly read the data 2, the entire instrument is compact structure, complete 3, kerosene smoke point tester using plug-type structure, more convenient to replace the wick 4, kerosene smoke point tester using a special glass observation window, easy to operate 5, kerosene smoke point tester simple operation, high measurement repeatability Technical parameters 1, the scale: ruler should on the black glass with white flags, their white or black stripes central 2 mm will be divided into bisecting vertical ruler. Ruler measuring range should be 50 mm, 1 mm division. Every 10 mm on the digital standard, with each 5 mm long marking. 2, wick catheter: top wick catheter should be exactly at the same level with the zero on the scale. 3, the lift base: total distance of not less than 10 mm stroke, moves smoothly and evenly. 4, ? reservoir oil: oil reservoir mainly by oil storage body, wick pipes and air ducts, etc., whose critical dimensions conform to gb / t382, oil storage body diameter size ?21.25 ± 0.05, length of 109.0 ± 0.05; wick tube diameter ?4.7 ± 0.05, length of 82.0 ± 0.05; air duct diameter size ?3.5 ± 0.05, length of 90.0 ± 0.05.
Item, unit, range Softening point, centigrate, 110-115 Ash content, %, , 0.2 Toluene insoluble (ti), %, 28-32 Quinoline insoluble (qi), %, 6-10 Coking value, %, , 54 Fixed carbon content, %, , 50 Volatile matter, %, 45-52 Moisture content, %, , 5 Sulphur matter, %, , 0.3
Ningxia Huiheng activated carbon Sales Co. Ltd. Anthracite under the conditions of isolated air, heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, solidification, shrinkage and other stages and then made coke, this process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Due to its high mechanical strength, porous structure, good adsorption performance, strong ability to cut pollution, fast filtration speed, long service life and so on. The utility model is suitable for domestic water and industrial water treatment devices. 1.High mechanical strength, broken rate and wear rate of less than 2% (percent by mass). 2. Fixed carbon is greater than 80%, mud content is less than 1.5, the use of long cycle. 3. Product appearance of good gloss, moisture is less than 2.5%, porosity greater than 75%, filtration speed. 4. Chemical stability, non-toxic substances. In the general acidic, alkaline, neutral water are not dissolved. 5. Particles uniform, large gap, low resistance, porous structure is reasonable, good adsorption performance, strong ability to intercept sewage.
SteelHome website publishes monthly report on China Steel Market, HRC, CRC, Plating/Coated Sheet, Stainless Steel, Iron Ore, Scrap, Coal, and Coke each month. If you are interested in SteelHome Monthly Report, please contact leo.ji@steelhome.cn or dial 86-21-50585733 Monthly Report on China Steel Market for April 2019 Abstract I Review on China steel market in April 2019 II Analysis on May 2019 Market 1. Crude steel production 2. Steel export 3. Market inventory 4. Raw Materials 5. Economic indicators 6. Ample capital supply in Q1 7. Conclusion Subscribe SteelHome website to read the whole article and find more China Iron/Steel market information you're interested in.
BRIEFING (October 21, 2020): Coke and Coal Analysis on Market and Trading Tips Keys Points: From Monday to Tuesday, price of domestic metallurgical coke and coking coal went up amid stabilities; that of PCI and thermal coal was stable; purchase price of PCI by steel mills went up and down. Met Coke: Several steel mills which priced in the second half of month in Southwest China accepted 50-yuan hike put forward by coking plants. Representative coking plants in Shanxi, Hebei and Shandong started the fifth round of price hike and requested a 50-yuan hike since October 20, to which steel mills did not respond yet. Coking plants had no inventory and that at ports was also declining, making it difficult for steel mills to replenish stock. Blast furnace operating rate of steel mills was high, indicating strong demand. Meanwhile, strict implementation of de-capacity in Shanxi boosted price as well. By the end of October, 5.6mn t of capacity was confirmed to be exited with newly added capacity of 750,000 t. 6.2mn t of capacity in Linfen, Yuncheng and Lvliang was asked to be diminished, which needed to follow up. It is expected that metallurgical coke price will stay at a high level for a short term. Table 1: Price of Domestic Standard I Grade Metcoke in Spot Market (yuan per ton) Coking Coal: Price of low-sulfur coking coal in Linfen, Shanxi rose by 20 yuan, and was stable at 1350-1370 yuan/t (bank acceptance); that of high-moisture coal increased by 20 yuan to 1360 yuan/t, total growth in September reaching 100 yuan. Price of raw coal went up by 20 yuan to 820 yuan/t, up 70 yuan in total. Quotation of imported coal kept falling; that of I grade coking coal dropped by $19.5 to $129-130 per ton in October; that of standard I grade coking coal declined by $2.5 to $119.5-122 per ton.
Shanxi Completed Coal Capacity Reduction during the 13th Five-Year Plan Shanxi province eliminated coal capacity of 40.99 million tons in 2020 and reduced accumulated coal capacity of 156.85 million tons during the 13th Five-Year Plan, according to data released by Shanxi Energy Bureau on January 10. Presently, coal capacity in Shanxi has been reduced to 1.35 billion tons from the previous 1.46 billion tons, and the number of coal mines in the province has been reduced to below 900 from the previous 1078. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
Inner Mongoli s Ejin Horo Banner Sept Coal Review Production In September 2020, a total of 14.98mn t of raw coal was produced in Ejin Horo Banner in Inner Mongolia, falling 1.45mn t or 9% from preceding year. Shendong Coal produced 5.96mn t of raw coal, up 580,000t or 11% from 2019. Local coal mines produced 9.02mn t of raw coal, down 2.02mn tor 18% on the year. Sales In September, Ejin Horo Banner sold 14.74mn t of coal in total, falling 1.25mn t or 8%. Shendong Coal sold 5.96mn t, up 580,000 t or 11% from last year. Local coal mines sold 8.79mn t, down 1.83mn t or 17% from prior year. Price By the end of September, coal price in Ejin Horo Banner averaged 322 yuan/t, falling 16 yuan/t or 4.7% on the year. Price of lump coal was 368 yuan/t, down 5 yuan/t yet up 1.3% year on year; that of raw coal declined by 44 yuan/t or 14% to 273 yuan/t from last year; that of powdered coal increased by 13 yuan/t or 4% to 336 yuan/t from 2019. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
China Second Largest Coal Company was Born in Shanxi A new coal giant was born in the great integration of Shanxi coal industries. Recently, Shanxi Provincial party committee decided to recombine Shanxi Jincheng Anthracite Coal Mining Group, Jinneng Group, Datong Coal Mine Group, Luâ??an Group, Huayang New Material Tech Group and China Taiyuan Coal Transaction Center after the reform into Jinneng Holding Group Co, Ltd. Jinneng Holding Group will become the second largest coal company in China. According to China National Coal Association, coal output of China Energy Group was 515mn t in 2019 and that of China Coal Group was 210mn t, ranking the first and second coal companies in China respectively. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
