Find Verified Chemicals Allied Products Suppliers, Manufacturers and Wholesalers

Caustic soda is the material for soap and detergent products, could dissolve the impurity in papermaking industry and fabric production, caustic soda products are used in oil refining industry, it could remove the acids.

In 25kg pp or pe bag (25mt/20'fcl)

B311

25kg p.P. Bag.20mt/20'fcl

It is widely used in blending industrial lubricating oils such as those for internal combustion engine, hydraulic facilities, gear, bearing, slideway and metal working, etc. The recommended dosage in oil is 0.5-3.0%.


The product is packed in 200 liter metal drum (net weight: 200 kg/drum).

This product is primarily used in blending marine oil and high quality internal combustion engine oil, especially the engine oil for high-sulfur fuel. It is brown liquid. The recommended dosage is 0.5-25.0%.

Characteristics

Strong acid neutralization capacity
Good oil solubility
Scatter glial and ash
Good anti-rust and anti-foam ability
Good thermal stability and hydrolytic stability
Excellent performance of water resistance and high-temperature detergency.


200 liter metal drum (net weight: 200 kg/drum).

This gear oil additive package can be used in blending the following grads of API GL-5 vehicle gear oil: SAE90, 80W/90, 85W/90, 85W/140 and the following grads of industrial gear oil: N68, N100, N150, N220, N320, N460. It is brown transparent liquid.

Characteristics:
Be available for all kinds of base oils
The GL-5 80W/90 vehicle gear oils with the dosage of 4.5% G353 have passed the test of CRCL-42, CRCL-33, CRCL-37 and CRCL-60 etc.
The 320 heavy load industrial gear oils with the dosage of 1.6% G353 meet the standard of American steel USS-224.


200 liter metal drum (net weight: 200 kg/drum).

This product is a compound of zinc-dithiophosphate, detergent, dispersant and antioxidant. It is primarily used in blending various low-grade and middle-grade lubricant oils. With very low dosage, it can meet the requirements of SB/CB and SC/CC grade oils. The product is brown liquid.

The recommended dosage is as below:

API grade Single-grade Multi-grade
SB/CB 1.8% 2.0%
SC/CC 1.8% 2.0%
SD/CC 3.5% 3.9%
SE/CC 3.5% 3.9%
SF/CD 4.0% 4.4%.


CHARACTERISTICS

Excellent detergency, dispersion and anti-oxidation ability.



200 liter metal drum (net weight: 200 kg/drum)

Apperance: White Powder.

Use: in painting, printing oil, paper making, plastic, rubber, artificial fiber, welding electric, enamel, electric appliances and construction material.

1)Good luster,
2) Strong dispersion and dyeing force,
3) White powder, 4) Insoluble in water,
5) Soluble in hot and strong acid and alkali,
6) Good chemical stability,
7) Strong tint-reducing power, 8) Hiding power,
9) Excellent .

25KG PP BAGS 22MT/20'FCL.

This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. The recommended dosage in oil is 2.0-4.0%.

The product is packed in 200 liter metal drum (net weight: 170 kg/drum).

Item iron oxide red 130
Fe2o3/fe3o4 fª%96
105fpc moisture fn%1.0
Water soluble salts fn%0.3
Residue on 45um fn%0.2
Ph-value3.5-8
Oil absorption 15-25
Tinting strength %95-105
Density approx / cm3 5.0-5.1
Iron oxide red 190
Fe2o3/fe3o4 fª%95
105fpc moisture fn%1.0
Water soluble salts fn%0.3
Residue on 45um fn%0.2
Ph-value3.5-8
Oil absorption 15-25
Tinting strength %95-105
Density approx / cm35.0-5.1
Iron oxide brown 610
Fe2o3/fe3o4 fª%92
105fpc moisture fn%1.0
Water soluble salts fn%0.5
Residue on 45um fn%0.3
Ph-value 4--7
Oil absorption 20-30
Tinting strength %95-105
Density approx / cm34.8
Iron oxide black 780
Fe2o3/fe3o4 fª%93
105fpc moisture fn%1.0
Water soluble salts fn%0.5
Residue on 45um fn%0.3
Ph-value 5--8
Oil absorption 15-25
Tinting strength %95-105
Density approx / cm3 4.5-5.0
Iron oxide yellow 313
Fe2o3/fe3o4 fª%86
105fpc moisture fn%1.0
Water soluble salts fn%0.3
Residue on 45um fn%0.3
Ph-value 3.5--7
Oil absorption 25-35
Tinting strength %95-105
Density approx / cm34.0-4.3
Iron oxide blue
Fe2o3/fe3o4fª%
105fpc moisture fn%1.0
Water soluble salts fn%0.5
Residue on 45um fn%0.3
Ph-value
Oil absorption
Tinting strength %95-105
Density approx / cm3




25kg net bag, 23mt in 20f+fcl

Soda ash light
Total alkalinity(as the dry na2co3 %)99.2% min
Chloride(as the nacl %) 0.7% max
Iron(as the fe %) 0.004% max
Matter insoluble in water 0.08% max
Loss on ignition 0.8%max
Soda ash dense
Total alkalinity(as the dry na2co3 %) 99.2% min
Chloride(as the nacl %) 0.7% max
Iron(as the fe %) 0.0035% max
Matter insoluble in water 0.03% max
Bulk density(g/ml) 0.90min

Caustic soda
Caustic soda 99%
Naoh99% min
Na2co30.90% max
Nacl 0.15% max
Fe2o30.007% max
Caustic soda 96%
Naoh96% min
Na2co31.4% max
Nacl 2.8% max
Fe2o30.01% max




Soda ash:25kgs net bag, 20mts in the 20f+fcl
Caustic soda:25kg plastic bags(3layer pp&pe)

Lithopone28%
Ba+so4 (as zns)%(m/m) 99min
Zns%28min
Zno% 0.6min
Volatile matte%0.3max
Matter soluble in water% 0.4max
Residue on sieve 63um% 0.1max
Oil absobpation value(100g)14max
Lithopone30%
Ba+so4 (as zns)%(m/m) 99min
Zinc (as zns) (m/m)%30min
Zinc oxide %(m/m) 0.3max
105fª volatile%(m/m) 0.3max
Water soluble%(m/m) 0.3max
Screen residues (63um mesh) %(m/m)0.1max
Oil absorption g/100g 10max




25kgs net bag, 21mts in the 20f+fcl

Titanium dioxide anatase type
Tio2 98%min
Volatile content 0.4%max
Water soluble matter 0.5%max
Oil absorption 26%max
Suspension ph 6.5-8.0
Titanium dioxide rutile type
Tio2 93%min
Water soluble matter 0.3%max
Oil absorption22%max
Suspension ph 6.5-8.0
45umsieve residue0.1%

Zinc oxide 99%
Content (zno)99%min
Mno0.001%max
Pbo 0.15%max
Cuo 0.001%max
Heat loss 0.3%max
Hcl insoluble matter 0.01%max
Water soluble matter 0.1%max
45um sieve residue 0.15%max
Zinc oxide 99.5%
Content (zno)99.5%min
Mno0.0005%max
Pbo0.05%max
Cuo0.0005%max
Heat loss 0.3%max
Hcl insoluble matter 0.01%max
Water soluble matter 0.1%max
45um sieve residue 0.15%max
Zinc oxide 99.7%
Content (zno) 99.7%min
Mno0.0004%max
Pbox0.037%max
Cuo00.0004%max
Heat loss 0.3%max
Hcl insoluble matter 0.01%max
Water soluble matter 0.1%max
45um sieve residue 0.15%max




25kg net bag, 20mt in 20f+fcl

M/m tio2 content%í² 94
Tint reducing power european unit í² 180
Whiteness % í² 97.0
Dispersibility mí 12
Oil absorptiong/100g í 20
105moisture % í 0.75
Specific resistance +.Cm í² 9000
Solution in water % í 0.3
Residue(45m) í 0.01
Ph value 6.5-8.0
Volatile matter(105d)í² -


Rutile

Titanium dioxide rutile (chlorination process)

Content% ---------------------------------------------- 93min
Color(whiteness)% --------------------------------- 98min
Tint redusing power% ---------------------------- 100 min
Oil absorption (g/<100g>) ------------------------- 22 max
Density(g/cm3)-----------------------------------------4.0

Ph value ------------------------------------------------ 6.5-8.0

45 um sieveresidue %---------------------------- 0.1max

Water-soluble matter% ----------------------------- 0.3max

Rutile in tio2 content% ----------------------------- 98min

Pp bag

Introduction to the Product
These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm.

Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to UVA and UVB, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.

Characteristics of the Product
HTTi-01 is a nano powder made of nano TiO2 mixed with some metal or metal oxide. Its crystal is anatase, and it may be used for producing photocatalyst. Under the illumination of light of less than 400 nm, the valence electrons of this powder are sent to the conduction band to put the electron and cavity in action with O2 and H2O absorbed on their surface and produce superoxide anion radicals. These radicals have the function of decomposing hazardous gas and organic pollutants through photo catalysis and antisepsis through photo catalysis, and can be widely used in air purification and sewage treatment. Moreover, this product is characterized by low cost, good stability, high photocatalytic activity and wide range of absorption of light wave. HTTi-01-W and HTTi-01-Mn has the highest catalytic activity, HTTi-01-N also has high catalytic activity. These products can be used in the field of decomposition the automobile exhaust, increasing fuel combustion efficiency and sewage treatment, etc.

Technical Index
Model: HTTi-01
Appearance: White powder
Content of titanium oxide (%): 99
Average of the grain size (nm): 10
Specific surface area (m2/g): 150
Crystal /surface treatment by: anatase
Characteristics: large specific surface, high photocatalytic activity

Model: HTTi-01-W
Appearance: White powder
Content of titanium oxide (%): 94
Average of the grain size (nm): 10
Specific surface area (m2/g): 100
Crystal /surface treatment by: anatase
Characteristics: highest photocatalytic activity

5/10kg/bag

Introduction to the product
These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm.
Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.

Characteristics of the product
Htti-03-h and htti-04-h are made for cosmetics. The model of htti-03-h is hydrophilic, while htti-04-h is lipophilic. These products have very good characteristics of even granularity and more excellent absorbency to uva and uvb than sun organic screener. They are widely and safely used as inorganic sun screener in the cosmetics and well compatible with other raw materials. They are the ideal additive of the sunscreen, anti-ultraviolet rays cosmetics.

Technical index
Model: htti-03-h
Appearance: white powder
Content of titanium oxide (%): 88
Average of the grain size (nm): 30
Specific surface area (m2/g): 100
Crystal /surface treatment by: especially for cosmetics, hydrophilicity
Characteristics:good transparency, clear blue light and has the ability to resist the ultraviolet ray

Model: htti-04-h
Appearance: white powder
Content of titanium oxide (%): 85
Average of the grain size (nm): 30
Specific surface area (m2/g): 100
Crystal /surface treatment by: especially for cosmetics, lipophilicity
Characteristics:idem

5/10kg/bag

Titanium dioxide, rutile titanium dioxide, anatase titanium dioxide, soda ash, caustic soda, formic acid, oxalic acid, glacial acetic acid, phosphoric acid, boric acid, sulfamic acid, stearic acid, dodecyl benzene sulfonic acid (dbsa), sodium formate, chrome oxide green, lead oxide, iron oxide, iron oxide red, iron oxide yellow, aluminum tripolyphosphate, zinc oxide, chrome yellow, lithopone, carbon black, sodium bicarbonate, hydrogen peroxide, sodium metabisulphite, polyacrylamide(pam), aluminium dihydrogen phosphate, zinc phosphate, aluminium sulphate, copper sulfate, sodium hexametaphosphate, calcium chloride, ultramarine blue, sodium tripolyphosphate

Type: SHMP 68% Tech Garde
Properties: White powder, density is 2.484 (20C), easily soluble in water, but not in organic solution, absorbent to dampness, and turn sticky when absorbed dampness in air. It is possible to form solvent compound with metallic ions such as Ca, Ba, Mg, Cu and Fe; It is a fine agent for water treatment.

Caustic soda flake 99%
Other name: sodium hydroxide flake, naoh, sodium hydroxide flake
1. Description:
Molecular formular: naoh,
Cas no 1310-73-2
Formula naoh
Molecular weight 40.01 g/mol
Appearance white flakes
Melting point 596 k (318.4)
Relative density 2.1103kg/m3(as stp)
Solubility 111 g/100 g in water
2. Packing: 25kg or 50kg/bag, also can according to customers's requirements/as buyers request.
3. Advantage:
Caustic soda is our strong item, we can supply caustic soda /naoh at lower price and best quality.
4. Application:
Baisc chemical raw material, widely used in chemical industry
1). Used in water softening, in the soap and refined oil line, refining petroleum products, sanitation, hygiene and production chemicals.
2). Used as acidity regulator, alkali, impregnant's pigment in food and drug industry
3). Used as a raw material in the manufacturing of soaps, detergents, textiles and paper.
5. Specification
Naoh: 99.0%min
Na2 co3: 0.5%max
Nacl: 0.03%max
Fe2 o3: 0.005%max
Caustic soda Naoh Na2co3 Nacl Fe2o3
99% flakes 99.38%min 0.5%max 0.03%max 0.005%max
98%flakes 98.65%min 0.7%max 0.92%max 0.007%max
96%flakes 96.68%min 1.2%max 2.5%max 0.008%max
99%solid 99.30%min 0.5%max 0.03max 0.005%max
99%pearls 99.35%min 0.5%max 0.03%max 0.005%max



25kgs woven bag or upon clients request.