SMLS pipe, ERW pipe, SSAE pipe, LSAW pipe.
Minstrong copper oxide CuO catalyst is produced by chemical liquid-phase synthesis technology. There are a large number of micropores distributed in the structure, and the inner and outer surfaces have abundant active sites, with high specific surface area and high activity. The forms of activated copper oxide CuO catalyst have columnar, granular, powder, spherical and so on.
Minstrong CO2 Absorber has two types, one is soda lime, the other is cacium lime. Minstrong can provide the suitalbe CO2 absorber as your working condition and request. Name:Soda lime CAS:8006-28-8 Molecular formula:CaHNaO2 Molecular Weight:96.07 Application: Used as CO2 Absorber in Medical, military, diving, mining and safety CO2 absorber can also be used as a desiccant (calcium oxide acts as a desiccant), which can be used to dry neutral gases such as oxygen, and can also be used to dry alkaline gases such as ammonia. At the same time, it can also be used to absorb acid gases, such as carbon dioxide and sulfur dioxide. If only sodium hydroxide is present, this desiccant cannot be used at higher temperatures, because sodium hydroxide can react with the most commonly used glass instruments in the laboratory (the main component is silica) and corrode the instruments. A small amount of methane produced in the laboratory can be co-heated with soda lime and sodium acetate (sodium acetate) to generate sodium carbonate and methane.
Minstrong carbon monoxide catalyst can convert carbon monoxide into carbon dioxide at normal temperature, avoiding equipment and personnel from being damaged by carbon monoxide. The catalyst adopts chemical synthesis method to manufacture active ingredients, and accurately controls each process parameter of the synthesis reaction. Aluminum oxide is used as a binder, and the active ingredient content is as high as 85%. The powder does not contain binders, and the active ingredient is as high as 99%. The catalyst does not contain activated carbon, can adapt to different working conditions, does not burn, has no volatility, which is safe to use, and does not cause secondary pollution. Applications: 1.Purify carbon monoxide in refuge chambers, airtight compartments and respirators to avoid carbon monoxide poisoning; 2.Purify carbon monoxide in air separation system and compressed gas, remove carbon monoxide at low temperature; 3.Remove carbon monoxide from process gas; 4.Remove the carbon monoxide in the flue gas, and realize the discharge of carbon monoxide up to the standard.
Minstrong Ozone Decomposition Catalyst can decompose ozone into oxygen at room temperature. It can be widely used in the synthesis of fine chemicals and the treatment of tap water and waste water. It can also be used in the advanced cabins of atomic energy, radio and supersonic passenger aircraft, copiers, household appliances, etc. Honeycomb Ozone Decomposition Catalyst Packing: 1. General Packing: carton box with plastic frame / Bubble shock absorber; 2. Packing based on userâ??s needs.
Why Reusable & Removable Thermal Insulation Cover? >Keep Heat/Cold In and Out >Easy to Remove and Re-install >Heat Conservation, Saving Energy Costs, Increase energy efficiency >Fire, Freeze & Personnel Protection >Protection of personnel or manufacturing environment system >Temperature control,Reduced Room Temperature >Sound Reduction The Insulation Jacket is custom designed to significantly reduce heat loss and surface temperature for Plastics Extrusion, Injection Molding, and Blow Molding. The reduction in heat loss can save energy, thereby saving process electricity and air conditioning electricity. In addition to saving energy, the reduced heat loss will improve the surrounding work environment , thus increasing overall productivity. All insulation covers are custom designed and manufactured ,to meet the requirements of your application. Product Name Customized reusable fiberglass thermal cover removable insulation jacket Material Fiberglass, Ceramic Fiber , High Temperature Fabric Color silver or customized color Fire Rating/ Inflaming Retarding A Grade, GB8624-2006, German standard DIN4102 A1 Feature Fireproof, Waterproof, Heat Insulated, Anti-corrosion, Long life Temperature Range -198-1300 Moisture absorption rate:
1. Introduction FP-3T uses precise high-efficiency filter element to remove the particles from the gas, especially the tiny dust. Universal type design can be widely used in gas analysis system as well as providing several kinds of filter elements / membranes. It adopts stainless steel material which can be used in high-temperature and corrosive area. Replacement of filter element is easy; No need any tools while changing it. 2. Features Scientific and reasonable gas circuit with perfect appearance Made of 316 Stainless steel, corrosion resistance as well as easy to change the filter Made of filter, with high temperature and corrosion resistance and recycle Easy to replace and clean Base Material: 316L 3. Specifications sintering titanium alloy Sampling interface: G1/4-6mm Max operation pressure: 5bar.abs Max Volume: 70cm³ Filter material: sintering titanium alloy Sealing form: O-ring Mount material: 304 SS Installation method: wall mounted Filter precision range: 0.1-2um (optional)
1. Introduction FP-2T uses uses precise high-efficiency filter element to remove the particles from the gas, especially the tiny dust. Universal type design can be widely used in gas analysis system as well as providing several kinds of filter elements / membranes. Pollution degree can be seen directly with transparent shell. O-ring stalled in the best position, no need any tools to change filter elements. Optional to choose water drainage connector, which can be used with humidity alarm sensor together. 2. Features Special glass cover, anti-corrosive and easy to replace filter element. Pollution degree can be seen directly with transparent shell Base material: PTFE Optional to be used with humidity alarm sensor together 3. Specifications Sampling interface: PTFE G1/4-6 mm Max operation pressure: 4bar.abs Max Volume: 70cm³ Filter material: Ceramic SiC, PTFE, Glass fiber Sealing form: O-ring Holder material: Aluminum alloy Installation method: Wall mounted Filter precision range: 0.1-2um (optional) Power supply (for humidity alarm): DC24V Optional humidity alarm signal output: DC24V output
1. Introduction HP-220-5-03 peristaltic pump is specialized for condensed fluid recycle, to make sure that elements can work smoothly, such as cooler and catch tray. Synchronous generators and gear wheel can prevent condensed fluid refluxing. 0.3L/h pipetting of the pump can eliminate the condensed fluid. The pump has superior creep resistance and antifatigue function. 2.Features Preventing condensed fluid refluxing efficiently 0.3l/h pipetting Easy to replace new pump Containing superior Germany peristaltic pump tube 3.Specification Rpm: 5rpm or 10rpm Flux: 0.3NL/h Power supply: 220VAC/50Hz 3.5W Connecting material: PVDF Interface form: PVDF, OD6mm ferrule Pump tube size: D7.5mm/ID4.3mm L=125mm
Features of Infusion Pump 1. HD LCD Display, high capacity words, friendly user interface, dynamically display working status; 2. Audible and visual alarm for occlusion, empty, low battery, end of infusion, door open, wrong setting, etc., which gain patents; 3. Compatible with any brands of infusion sets after correct calibration; 4. Preset solution volume to greatly reduce the workload of nurses; 5. Work mode: ml/h and drop/min can switch freely; 6. Three levels of occlusion: high, middle and low; 7. Purge function; 8. KVO (keep-vein-open) automatically opens as infusion is completed, KVO rate is 1-5ml/h(1ml/h step); 9. Power Source: AC100---240V, 50/60Hz; Internal Battery; 10. Automatically record the settings of last infusion; 11. BYS-820D can store 2000pcs of infusion records and it has a drug library. 12.OEM is available. Specification of Infusion Pump Rate 1ml/h ~ 1,200ml/h Flow Rate Accuracy Within ±5% (after correct calibration) Mechanical precision Within ±2% Purge Rate 100ml/h ~ 1,000ml/h (100 ml/h step) Infusion Volume 1ml ~ 9999ml Total Infusion Volume 0.1ml ~ 9999.9ml KVO rate 1ml/h ~ 5 ml/h (1ml/h step) Occlusion High: 800mmHg ±200mmHg (106.7kPa±26.7kPa Medium: 500mmHg ±100mmHg(66.7kPa±13.3kPa Low: 300mmHg ±100mmHg (40.7kPa±13.3kPa ) Unique audible and visible alarm Human voice alarm for End of injection, occlusion, door open, bubbles in the tube, wrong setting, low battery, AC power pulled out etc. Power Source AC 100V ~ 240V, 50/60Hz; Internal rechargeable Li battery, capacity�?�1,600mAh, 4 hours internal battery backup Bubble detector Ultrasonic wave detector; detection sensitivity �?�25μL Fuse F1AL/250V, 2 pc inside Power Consumption 18VA Operating Condition Ambient temperature: +5�?? ~ +40�??; Relative humidity: 20 ~ 90% Atmospheric pressure: 86.0kpa ~ 106.0kpa Transport & Storage Condition Ambient temperature:-30�?? ~ +55�?? Relative humidity: �?�95% Equipment Classification Class II, internal power supply, Type CF IP Classification IPX4 Dimension 140mm (L) �?157mm(W) �?220mm(H) Weight 1.8kg (net weight) penny at csbeyond.com -
Astm a53 welded erw black steel tube Size10mm-457mm Wall thickness 0.5mm-20mm Length1m-12m , by customers requiremnts Internatioanal standardIso 9000-2001 StandardsAstma53, bs1387-1985, gb/t3091-2001, en39, bs1139 MaterialsQ195, q215, q235, q345 Product categoryMetallurgy, mineral &energy TechniqueWelded Packing1.Big od:in bulk 2.Small od:packed by steel strips 3.Woven cloth with 7 slats 4.According to the requirements of customers UsageMechanical&manufacture, steel strcuture, Shipbuilding, bridging, automobile chassis Main marketMiddle east, africa, asia and some uropean country and america , australia Country of originChina Productivity20000 metric tons pet month RemarkPayment terms :T/T , L/C Terms of trade :fob , cfr, cif , Minimum order : 10 tons Lead time :on or before 20 days . Addition: 1. Special design available according to clients' requirements. 2. Anti-corrosion and high-temperature resistant with black painting. 3. All the production process are made under the iso9001:2000 strickly.
Carbon high quality erw steel tube Outer diameter1/2inch-24inch 21.3-610mm Wall thicknessSch40/sch80/sch160 2mm to 25mm CertificateIso 9001:2008 StandardBs, gb, astm, asme, din UsageUsed for gas, oil, water, chemical transport in low or medium temperate TechniqueErw
Application:pipe for oil exploit In bundles varnish paint outside/with plastic caps on both ends
Textile enzyme, antiback staining agent, acid cellulase, neutral cellulase, catalase, amylase, bio polish enzyme.
Indium Products, Gallium, Tellurium Products, Germanium, Selenium, Iridium, Ruthenium, Rhodium, Platinum, Palladium.
Bandsaw blade for wood cutting and food processing, bimetal band saw blade, band knife, bread slicer blade, bone saw machine.
2, 6-xylenol cas no.576-26-1, 2, 4-xylenol cas no.105-67-9, 2, 6-diisopropyl phenol cas no.2078-54-8, isopropyl isocyanate cas no.1795-48-8, tert-butyl isocyanate cas no.1609-86-5, butyl isocyanate cas no.111-36-4, cyclohexyl isocyanate cas no.3173-53-3, 4-chlorophenyl isocyanate cas no.104-12-1, p-toluenesulfonyl isocyanate cas no. 4083-64-1, 3, 4-dichlorophenyl isocyanate cas no.102-36-3.
Zinc sulfate, ferrous sulfate, manganese sulfate monohydrate, copper sulphate pentahydrate.
Scandium, scandium oxide, aluminum scandium and thorium nitrate.Trade
Sodium fluoride, sodium silicofluoride, ammonium fluoride, ammonium bifluoride, potassium silicofluoride, potassium cryolite.
