Find Verified Optical Machinery Equipment Suppliers, Manufacturers and Wholesalers

Sunday Optics manufacture half penta angle prisms according to customer size and drawing

The half penta prism makes the beam turn 45, generally Aluminum coatied and black paint protection

Material:H-K9L

Size:5-100mm

Tolerance:-0.05mm

Surface Quality:20-10

Angle Tolerance90%
S/D 60-40 40-20 20/10 10/5
Flatness 1/10lambda at 632.80nm
Chamfer 0.25mmx45
Angle tolerance

Penta Angle Prism are widely used in laser level, Image system, precision system, and optical area. For penta prism, the deviation angle of 90 is independent of the orientation of the prism, thus it is particularly important and wide in application which the prism orientation cannot be precisely controlled, we can produce high precision penta angle prism,and make coating according to customer's request.

Penta Angle Prism

Specifications

Material BK7, UV Fused Silica,Sapphire, ZnSe,Caf2,Si,Ge,etc.
Size 3mm-380mm
Size tolerance +/-0.02mm or customer request
Clear Aperture>90%
S/D 60-40 40-20 20/10 10/5
Flatness 1/10lambda at 632.80nm
Chamfer 0.25mmx45
Angle tolerance

Prisms
Optical Components
Customized Light Guide Prism
PARAMETER:
Prisms:Right angle prism, Dove prism, Beam splitter, Penta Prism, Corner prism, Trapezium Prism, Rhomoboid Prism, Roof  Prism, Cube prism, customized prisms,etc.
Light Guide Prism Supplier:ChangChun BRD Optical co., Ltd
Flatness 2 /10
Surface Quality 80/50-10/5
Angle Tolerance 3-15
Clear Aperture >85%-95%
Chamfer 0.3mmÃ?45°-0.1mmÃ?45°
Coating As per customers requirement

Prisms
Optical Components
Right Angle Prism Supplier:ChangChun BRD Optical co., Ltd

PARAMETER:
Right angle prisms are extremely versatile optical components, commonly used as individual prisms and components of optical assemblies. A beam of light entering the leg of a right angle prism will deviate by a nominal value of 90°, while precise rotation of the prism controls beam alignment. When light enters the hypotenuse of the prism, it is commonly called a porro prism. In this configuration, a light beam will undergo 180° deviation that is invariant in the azimuthal axis, while precise adjustment of the prism controls beam elevation.
Specification
Material BK7 glass / UV Fused silica
Dimension 3mm~200mm
Dimension tolerance ±0.1mm~±0.05mm
Surface quality 60/40, 40/20, 20/10
Surface flatness  Î»/20 λ/4
Angle tolerance

Prisms
Optical Components
PARAMETER:
BK7 Glass Dove Prism have an unusual and very interesting characteristic , if you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal peformance, use dove prisms with collimated light.
Specification

Material BK7 glass /   Fused Silica
Dimension   tolerance + 0.0 / -0.2mm
Deviation 3arc min.
Flatness λ/2@632.8nm
Clear aperture >85%
Surface   quality 60/40, 40/20
Bevel 0.1mm Ã?45°

Optical Windows
Optical Components
PARAMETER:
Optical Glass Square Windows are optical glass with ground and polished faces that are relatively parallel.  They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and scratch-resistant coating(AS).Windows with coating can enhance the light penetration strength,and own function of waterproof ,dustproof,and scratch-proof.
They are mainly used in mobile phone screen and lens protection,digital camera, digital video recorders, industrial optical windows, touch screen products, GPS products, digital electronic products windows, car rearview mirror, computer screen, laptop screen, watch surface and so on.
BRD Optical  Provide all types of windows made from different materials. Special size and materials are also available upon request. In addition, we provide a variety of single layer or multiplayer anti-reflecting coating on optical windows.

Specification
Material Optical glass, Fused silica, Optical crystal
Design Wavelength 633nm
Focal Length Tolerance ±2%-5%
Dimension 5-150mm
Dimension Tolerance +0/-0.2mm ~ +0/-0.02mm
Flatness 2λ-λ/10
Surface Quality 80/50-10/5
Clear Aperture >85%-95%
Bevel 0.3mmÃ?45°-0.1mmÃ?45°
Coating As per customers requirement

Optical Windows
Optical Components
PARAMETER:
optical glass Step Windows are latively parallel.  They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and scratch-resistant coating(AS).Windows with coating can enhance the light penetration strength,and own function of waterproof ,dustproof,and scratch-proof.
They are mainly used in mobile phone screen and lens protection,digital camera, digital video recorders, industrial optical windows, touch screen products, GPS products, digital electronic products windows, car rearview mirror, computer screen, laptop screen, watch surface and so on.
BRD Optical  Provide all types of windows made from different materials. Special size and materials are also available upon request. In addition, we provide a variety of single layer or multiplayer anti-reflecting coating on optical windows.

Specification
Material Optical glass, Fused silica, Optical crystal
Design Wavelength 633nm
Focal Length Tolerance ±2%-5%
Dimension 5-150mm
Dimension Tolerance +0/-0.2mm ~ +0/-0.02mm
Flatness 2λ-λ/10
Surface Quality 80/50-10/5
Clear Aperture >85%-95%
Bevel 0.3mmÃ?45°-0.1mmÃ?45°
Coating As per customers requirement

Prisms
Optical Components
PARAMETER:
Polarizing cube beamsplitters split randomly polarized beams into two otehogonal, linearly, polarized compoments, S-polarized light is reflected at a 90° while P-polarized light is transmitted. Each beamsplitter comsists of a pair of percision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse of one of prisms.
Polarization Cube Beamsplitter 
Polarizing cube beamsplitters split randomly polarized beams into two otehogonal, linearly, polarized compoments, S-polarized light is reflected at a 90° while P-polarized light is transmitted. Each beamsplitter comsists of a pair of percision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse of one of prisms.
High Powe Cube Polarization Beamsplitter 
High power polarization beamsplitter can be facricated by BRD Optical.  Same as the above, it use precision optical contacted technology which makes it has high laser damage threshold.
High Damage Threshold>500MV/cm2
Transmission >96% Central Wavelength
Extinction Ratio>1000:1

Specification

Material Optical glass BK7 / ZF glass
Dinension tolerance ±0.1mm
Flatness λ/4 632.8nm
Surface quality 60/40, 40/20
Angle tolerance 96%,     Ts,1%   (Narrowband)
Tpave > 95%,     Ts,1%   (Broadband)
Principal reflectance Rs>99%,  Rp

Optical Components
Fused Silica Wedge Prism
PARAMETER:
The wedge prism is a prism with a shallow angle between its input and output surfaces. This angle is usually 3 degrees or less. Refraction at the surfaces causes the prism to deflect light by a fixed angle. When viewing a scene through such a prism, objects will appear to be offset by an amount that varies with their distance from the prism.
Specification
Material BK7 glass / Fused silica
Surface Flatness: < λ / 10 @ 633nm ~λ/4@633nm
Surface Quality: 60/40, 40/20, 20/10, 10/5 (both sides)
Dimension Tolerance:

HR manufactures a wide variety of Prisms. Custom designs including right-angle, equilateral (dispersing), and cube Prisms, dove Prisms, roof Prisms, penta Prisms, and retroreflectors. These Prisms are available in a wide variety of materials, including glass, Germanium, Silicon, ZnSe , ZnS , Fused Silica, Quartz and calcium fluoride. Dimension 2mm to 500mm.

orner cube is a high-quality product designed to meet the needs of businesses looking to laser measurement. This product offers a range of features and benefits that make it an ideal choice for businesses of all sizes.



Features:

Retroreflector prism consists of three mutually perpendicular reflecting surfaces that form an angular cone structure with an internal angle of 90 degrees. When light is incident on any of the reflecting surfaces, it undergoes three reflections and eventually leaves the prism in a direction almost exactly opposite to that of the incident light. This triple reflection ensures that the direction of the reflected light is highly aligned with the direction of the incident light, enabling accurate retroreflection of the light, even if the angle of incidence changes.



Benefits:

a. UV Material

b. High Flatness

c. High Volume

d. Cheap Price



We believe that our corner cube offers an unbeatable combination of quality, performance, and value. If you have any questions about this product or would like to learn more about how it can benefit your business, please don't hesitate to contact us. We are dedicated to providing excellent customer service and helping our customers achieve their business goals.

Thank you for considering corner cube. We look forward to the opportunity to work with you and help you achieve success.

Penta Angle Prism are widely used in laser level, Image system, precision system, and optical area. For penta prism, the deviation angle of 90 is independent of the orientation of the prism, thus it is particularly important and wide in application which the prism orientation cannot be precisely controlled, we can produce high precision penta angle prism,and make coating according to customer's request.

Sunday Optics provides many kinds of roof prisms including Schmidt Roof Prism Lehmann Roof Prism Abbe Roof Prism Penta Roof Prism and Combined Roof Prism, etc.



Lehamann Prism

Material: Optical glass, H-K9L, Quartz

Size:5-300mm

Angle Tolerance:3'

Size Tolerance:+/-0.05mm

Coating: AR BBAR Metal

Porro Prism A refracting optical prism used in optical instruments to modify image orientation, In use, the light enters through the largest rectangular plane in the prism, passes through two total reflections of the inclined plane, and then penetrates the original plane of incidence, Because the light comes in and out normally, the prism does not disperse. But the image that passes through Porro prism will be flipped 180 degrees, and it will travel in the direction it entered, which means it will travel 180 degrees.



Porro Prism

Material BK7, UV Fused Silica, Sapphire, ZnSe,Caf2,Si,Ge,etc.
Size 3mm-300mm
Size tolerance 0.00/-0.05mm or customer request
Clear Aperture 90%
S/D 60-40 40-20 20/10 10/5
Flatness 1/10 1/4lambda at 632.80nm
Chamfer 0.25mmx45
Angle tolerance