Brewster window use the characteristics of total reflection property of the material. When the incident Angle (called brewster Angle of the material) is specified, the Polarization component of S in the incident light is partially reflected, while the P component is close to the full transmission.Sunday offers a variety of Brewster Windows based on UV-fused quartz for UV applications The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows.Brewster window use the characteristics of total reflection property of the material. When the incident Angle (called brewster Angle of the material) is specified, the Polarization component of S in the incident light is partially reflected, while the P component is close to the full transmission.Sunday offers a variety of Brewster Windows based on uV-fused quartz for UV applications Specifications Diameter 10mm to 127mm Diameter Tol. +/-0.02mm Material JGS1 Surface Quality 10-5 standard Flatness 1/10 lambda Parallisam
Zerodul Window with hole, we can achieve flatness
Sunday Optics offer 600mm size window with full CA test by 24 inches Zygo Interferometer The Standard Window Glass is N-BK7 or Fused Silica, but when manufacture,Fused Silica is more easy to keep its flatness stability. UV Fused Silica is better for UV wavelength, high power laser, the UV tranmission can be 185nm. BK7 Glass is aways used for visible light and near infrared, it is more economy and used for low laser as a protect window.Sunday Optics advantange is: within 600mm windows, we can offer full CA test reports, 1/10 lambda at 600mm is achieved. Specifications: Material BK7 K9 Fused Silica, Corning Fused Silica Size 1mm to 800mm Tolerance +/-0.01mm Parallisam
Sapphire has superior optical transmission qualities for ball lens and half ball lens. Ball lens is used to improve the signal coupling between optical fiber, transmitter and detector, improve the signal quality, and can also be used in endoscopy, bar code scanning, aspherical lens preprocessed materials, sensors, etc. The ball lens has a short focal length, which minimizes the distance needed to travel from the ball lens to the fiber. Ball lens commonly used in the optical fiber coupling, laser collimating device, Optical Measurement System, it has a shorter focal length and the characteristics of small size. Sunday produce ball lens, half ball lens, Super hemisphere ball lens, hollow ball lens.Sunday Optics can manufacture ball lens Minumum diameter 0.3mm.Sapphire has superior optical transmission qualities for ball lens and half ball lens. Sapphire Ball Lens Specifications: Material:Sapphire Size:0.3-50mm Surface Quality:80-50 Tolerance:+/-0.002mm Coating: AR Coating Ovality:+/-0.002mm Stock Size Part No. Structure Dia.(mm) Material SBS1 Ball lens 1mm Sapphire SBS2 Ball lens 2mm Sapphire SBS3 Ball lens 3mm Sapphire SBS4 Ball lens 4mm Sapphire SBS5 Ball lens 5mm Sapphire SBS8 Ball lens 8mm Sapphire SBS10 Ball lens 10mm Sapphire SBS12 Ball lens 12mm Sapphire SBS20 Ball lens 20mm Sapphire SBS50 Ball lens 50mm Sapphire SHBS1 Half ball lens 1mm Sapphire SHBS1 Half ball lens 5mm Sapphire SHBS1 Half ball lens 6mm Sapphire SHBS1 Half ball lens 10mm Sapphire SHBS1 Half ball lens 13mm Sapphire SHBS1 Half ball lens 24mm Sapphire SHBS1 Half ball lens 36mm Sapphire SHBS1 Half ball lens 40mm Sapphire
Beamsplitter is an optical element that divides a beam of light into two beams according to a certain ratio of reflection and transmission.In the usual laser optical system, lighting optical system, spectrometer optical system, beam splitter is a common optical element degree of transmission and reflection percentage, transmission and reflected light polarization state to carry out segmentation.We can offer the K9 broadband splitter plate elliptical, ultraviolet spectroscopic uv spectral wedge, calcium fluoride (CaF2) broadband infrared spectral wedge, zinc selenide (ZnSe) infrared broadband polarization spectral wedge, standard Cube beam spliiter, PBS, NPBS and other standard splitting optics.The function of depolarization splitting prism is to divide the incident light intensity according to a certain proportion of reflection and transmission, so it is an ideal splitter for controlling the application of laser beam.The function of a polarization spectroscope (PBS) is to divide incident light according to a certain percentage of reflected and transmitted light according to the corresponding polarization state of light. Conventional Beam splitter cube is consist of two right angle prisms. one of the cant face will be coated metal coating or medium which has good reflective. Other faces will be coated AR coating. Conventional Beam Splitter Cube Material H-K9L N-BK7 JGS1 Demenision 10mm 12.7mm 20mm 25.4mm 50.8mm or customized Demenision tol. +0.00/-0.05 Surface Quality 20-10 10-5 CA 90% Surface Flatness 1/10 lambda633nm Beam Deviation
Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows. Specifications Diameter 0.1mm to 1000mm Diameter Tol. +/-0.02mm Material Bk7 sapphire fused silica,ZnS2,CaF2,Si,Ge. Surface Quality 10-5 standard Flatness 1/10 lambda Parallisam
The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows. Specifications Diameter 1mm to 1000mm Diameter Tol. +/-0.02mm Material Bk7 sapphire fused silica,ZnS2,CaF2,Si,Ge. Surface Quality 10-5 standard Flatness 1/10 lambda (Full CA 600mm) Parallisam
Dove prism is a kind of reflection prism used for image reflection.Dove prisms are formed by truncated rectangular prisms.A beam of light enters one of the slanted faces of the prism, fully reflects from inside the longest (bottom) face, and then exits from the opposite slanted face.The image through the prism is flipped, and since only one reflection occurs, the handedness of the image is reversed.Dove prisms have an interesting property that when they rotate along the vertical axis, the transmitted image rotates twice as fast as the prism.It is very important that applications use parallel or collimating beams and keep the large square reflector very clean.Another application is as an inverse. Dove Prism Specifications Material BK7, UV Fused Silica, Sapphire, ZnSe, Caf2, Si, Ge, etc. Size 2mm-300mm Size tolerance +/-0.02mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Porro Prism A refracting optical prism used in optical instruments to modify image orientation, In use, the light enters through the largest rectangular plane in the prism, passes through two total reflections of the inclined plane, and then penetrates the original plane of incidence, Because the light comes in and out normally, the prism does not disperse. But the image that passes through Porro prism will be flipped 180 degrees, and it will travel in the direction it entered, which means it will travel 180 degrees. Porro Prism Material BK7, UV Fused Silica, Sapphire, ZnSe,Caf2,Si,Ge,etc. Size 3mm-300mm Size tolerance 0.00/-0.05mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10 1/4lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Optical components, spherical lenses, cylindrical lenses, optical windows, optical coatings.
Items of analysis (11) : glucose (GLU) , bilirubin (BIL) , specific gravity (SG) , PH, ketone (KET) , occult blood (BLD) , protein (PRO) , urobilinogen (URO) , nitrite (NIT) , leukocytes (LEU) , ascorbic acid (VC) Wavelength: 510nm-650nm Testing speed: 120 samples per hour Storage: automatic storage up to 1000 items of patients¡¡£¤ data Display: 240*64 graphic LCD Printing: internal 57mm thermal printer Interface: RS232 standard computer interface Language selection: Chinese / English Working environment:temperature:15-35¡æ,humidity: 10-80% Power supply: AC 220V¡¡§¡è10%, 50Hz-60Hz,100w Box dimension: 470¡¡§¡é400¡¡§¡é238(mm) Gross weight: 7kg. Power supply: AC 220V¡¡§¡è10%, 50Hz-60Hz,100w Box dimension: 470¡¡§¡é400¡¡§¡é238(mm) Gross weight: 7kg
Co2 laser tube, fiber laser source, rf laser, laser power supply, laser power meter.Transport
Co2 laser tube
.Supply local products, provides investment services for peole wishing to invest in northern china
1. Perilla seed oil is a very rich source of omega-3 fatty acid alpha-linolenic acid (ALA). 2. Researches show the omega-3 series of unsaturated fatty acid such as alpha-linolenic acid has unique effect in building biomembrane structures and functions. 3. Alpha-linolenic acid will create DHA, DPA and EPA after it enters human body under the effect of enzymatic. 4. Perilla oil contains a large amount of alpha-linolenic acid. It can 1) Lower the blood lipid and blood pressure; 2) Prevent angiocardiopathy; 3) Restrain colon cancer and galactophore cancer; 4) Resist irritability dermatitis and asthma; 5) Protect liver and beautify skin.
Agrochemicals, food additives, synthetic flavours & fragrances, plant extract, adhesive and sealant, catalyst and auxiliary, dyestuff and pigment, materials, basic inorganic chemicals, organic chemicals, reagent.Clearing agent, transportation, shipping
Pesticide intermediates, chemical reagents, food additives and fine chemicals.Clearing agent, transportation, shipping
Name: LED (PDT) therapy instrument Beam source: Optional Red, Blue And Yellow Color Light source: Matrix Light Souce And Planar Light Source
Fiber optic spectrometer with the advantages of modularization and flexibility of its measuring system is widely used to measure wavelength and line width of laser, LED and common light source, can accurately obtain the spectral characteristics of the light source which is being tested. CNI developed spectrometers with the characteristics of compact and portable design, plug and play, easy operation and Spectral Analysis 5.0 software downloads, which are extensively applied on the fields of scientific research, teaching, industries and many other applications. CNI can also customize the wavelength and resolution of the spectrometers according to different customers’ demands.
Cylindrical Lens Cylindrical lens is used to provide focusing power in one section only. For illumination or detection of light from line sources. Also used to anamorphic compression of beams and images. Especially widely used to anamorphic compression of LD (laser diode) output beam. Our cylindrical lens include fused silica cylindrical lens, CaF2 cylindrical lens, ZnSe cylindrical lens, ZnS cylindrical lens. Capacity: Material: Optical glass, Fused silica,CaF2, MgF2, Sapphire, ZnSe, ZnS Diameter: 0.5 to 350 mm Diameter Tolerance: +0/-0.02 mm Thickness Tolerance: 0.01 mm Surface Quality: 10-5 Surface Figure:/10 Centration: 1 minute or 30 Second Coating: Uncoated, AR and HR Specification: MaterialBK7 or Fused Silica Design Wavelength632.8nm Design Index: BK7n=1.5147 0.0005 Fused Silican=1.457020.00005 Surface Figurex: /2; y: 2 Diameter Tolerance+0.00, -0.15 mm ThicknessTolerance0.2mm Paraxial Focal Length2% Centration85% Surface Quality60-40 scratch and dig Protective Bevel0.25 mm x 45 BK7 Plano-Convex Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TXC10110.0x10.012.76.544.32.09.8 TXC10220.0x10.012.76.544.32.09.8 TXC10310.0x10.020.010.293.32.017.8 TXC10420.0x10.020.010.293.32.017.8 TXC10510.0x10.025.012.873.02.023.0 TXC10620.0x10.025.012.873.02.023.0 Note: Other size,material and coatings are available upon request. BK7 Plano-Concave Cylindrical Lens Standard Products: Part No.XY (mm)f (mm)R1(mm)tc(mm)te(mm)fb(mm) TEC20110.0x10.0-12.76.544.32.0-14 TEC20220.0x10.0-12.76.544.32.0-14 TEC20310.0x10.0-25.012.873.02.0-26.3 TEC20420.0x10.0-25.012.873.02.0-26.3 Note: Other size,material and coatings are available upon request.
