Do not attempt lifting operations unless you understand the use of the equipment, the slinging procedures and the mode factors to be applied. Do not use defective slings or accessories. Do not force, hammer or wedge chain slings or fittings into position; they must fit freely. Check the correct engagement of fittings and appliances. Position hooks of multi-leg slings facing outward from the load. Do not lift on the point of the hook and ensure that the chain is not twisted or knotted. Back hook free legs to the master link to avoid lashing legs which might accidentally become engaged or otherwise become a hazard. Take the load steadily and avoid shock loads. Do not leave suspended loads unattended. In an emergency cordon off the area.
Size: 1000-30000kg
To avoid any damage of the containers and floor boards caused by anchors due to the long distance delivery and cause your any inconvenience and loss. In shipping yard, we will arrange for reinforcing and binding the anchors specially using steel frame, some steel wire ropes, wire rope clips, turnbuckles and put some blocks under the anchors.
Offshore Mooring Chain Offshore mooring chains are mainly used for offshore oil floating production system, semi-submersible drilling platform, single point mooring structure, FPSO mooring facilities structure and so on. Due to the mooring chains have to be long-term immersed in the seawater, the mooring chains have the features of high strength, good toughness, seawater corrosion resistance, fatigue resistance, wear resistance and other properties. Product Detail 1. Type: Mooring Chain 2. Diameter:34mm-162mm 3. Grade: R3,R3S, R4, R4S, R5 4. ABS, LR, BV, NK, GL, DNV, KR, IRS, RS,CCS Certificate 5. Application: offshore oil platform, offshore oil storage ship, offshore buoys and other other ocean development facilities
SEA ANCHOR DROGUE ldeal for fishing, our Sea Anchor Drogue is constructed with tough PVC Rip-Stop fabric, reinforced nylon straps, and continuous webbing for added strength. - Heavy duty and durable PVC material with reinforced webbing strap - Functional drift sock anchor is great for stabilizing your boat in windy cross current conditions - Suitable for power boats, sail boats, inflatable boat, jet skis, kayaks - Compact and easy to stow, easy to use and improves fishing success - Portable and durable
Introduction Compact design, low headroom for wider usage High precision machining gears with higher strength, and better toughness High precision sealed bearing with lighter hand force and higher mechanical efficiency Impact resistant gear cover, improving the strength and hardness Double pawls brake system - reinforced pawl, ratchet disc and brake Disc Double high precision CNC machining load chain guides Dust cover on brake system can effectively prevent rain and mortar intrusion Engineering optimized hand chain wheel groove and unique curled edge for the hand cover, preventing hand chain stack in fast operation High quality alloy steel forging hook T80 load chain with high precision, high strength and chain strength up to 1000N/m2 High strength chain end connection, with 2.5 times safety factor Super robust, much higher than 1500 cycles EN 13157 endurance testing
Introduction Compact design, low headroom for wider usage High precision machining gears with higher strength, and better toughness High precision sealed bearing with lighter hand force and higher mechanical efficiency Impact resistant gear cover, improving the strength and hardness Double pawls brake system - reinforced pawl, ratchet disc and brake Disc Double high precision CNC machining load chain guides Dust cover on brake system can effectively prevent rain and mortar intrusion Engineering optimized hand chain wheel groove and unique curled edge for the hand cover, preventing hand chain stack in fast operation High quality alloy steel forging hook T80 load chain with high precision, high strength and chain strength up to 1000N/m2 High strength chain end connection, with 2.5 times safety factor Super robust, much higher than 1500 cycles EN 13157 endurance testing
Introduction Compact design, low headroom for wider usage. Easy mounting top hook, assembly, alloy steel with heat treatment, won t break suddenly. Able to customize embossed cover. Easy mounting chain anchor plate. High precision machining gears with higher strength, and better toughness. Dust cover on brake system, impact resistance gear cover. Double pawls brake system. High precision double load chain guide. Low Friction Bushing - low maintenance.(Caged roller bearing optional) Adopt Japanese technology ,which is the convex word process. Low-alloy steel, which is reliable and durable. Premium alloy steel grade 80 load chain, which is safe and long serving life. Smooth operation, high efficient, small hand pulling force . Double pawls, two load chain guides wheel, which are safer. Needle bearing optioned. Widely used in the nuclear station, thermal power station, etc. CE&GS certificates.
To avoid any damage of the containers and floor boards caused by anchors due to the long distance delivery and cause your any inconvenience and loss. In shipping yard, we will arrange for reinforcing and binding the anchors specially using steel frame, some steel wire ropes, wire rope clips, turnbuckles and put some blocks under the anchors. NOMINAL WEIGHT(kg) H h L1 h1 L B1 Type A Type B Type C 40 557 557 430 303 303 67 430 198 60 637 637 492 347 347 76 492 227 100 760 760 590 410 410 90 582 270 125 814 814 629 443 443 97 629 290 150 866 866 665 470 470 103 670 308 180 919 919 710 500 500 110 710 327 240 1019 1019 788 552 552 121 784 361 300 1095 1095 850 595 595 130 844 388 360 1160 1160 898 630 630 138 898 412 420 1222 1222 946 660 660 145 946 434
Forged alloy steel or carbon steel. Quenched and tempered. Suitable for G70 chain or G43 chain. Not for lifting, only for lashing or pulling. G43: Ultimate load is 3 times The working load limit G70: Ultimate load is 4 times The working load limit Regular mark: G70 G70 1/4 FORGED. G43 G43 HIGH TEST FORGED 1/4 Code:DS125 Size:0.31-6.61lbs
Forged alloy steel or carbon steel. Quenched and tempered. Suitable for G70 chain or G43 chain. Not for lifting, only for lashing or pulling. G43: Ultimate load is 3 times The working load limit G70: Ultimate load is 4 times The working load limit Regular mark: G70 G70 1/4 FORGED. G43 G43 HIGH TEST FORGED 1/4 Code:DS128 Size:0.22-2.62kg
Forged alloy steel or carbon steel. Quenched and tempered. Suitable for G70 chain or G43 chain. Not for lifting, only for lashing or pulling. G43: Ultimate load is 3 times The working load limit G70: Ultimate load is 4 times The working load limit Regular mark: G70 G70 1/4 FORGED. G43 G43 HIGH TEST FORGED 1/4 Code:DS126 Size:0.40-6.93kg
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. Brand:DAWSON/OEM Code:DS217 G80 / Grade 80 Eye Type Belt Wing Hook Size:2T
Forged super alloy steel - Quenched and Tempered. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. Brand:DAWSON/OEM Code:DS380 G80 / Grade 80 Eye Sling Hook with Latch Size:1.5-5.4T
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breaking test. 100% Magnaflux Crack Detection. With latch. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. Other colour is available as per request. Positive lock latch is self-locking when hook is loaded. Brand:DAWSON/OEM Code:DS489 G80 / Grade 80 Special Clevis Self-lock Hook Size:10MM
Forged super alloy steel. Suitable for G80 Rigging Hardware. Individually proof test at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. 100% magnaflux crack detection. Ultimate Load is 4times the Working Load Limit. Brand:DAWSON/OEM Code:DS-H1027 Size:1-10T
Forged super alloy steel. Suitable for G80 Rigging Hardware. Individually proof test at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. 100% magnaflux crack detection. Ultimate Load is 4times the Working Load Limit. Brand:DAWSON/OEM Code:DS-H1026 Size:1-10T
Forged super alloy steel. Suitable for G80 Rigging Hardware. Individually proof test at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. 100% magnaflux crack detection. Ultimate Load is 4times the Working Load Limit. Brand:DAWSON/OEM Code:DS-H1029 Size:2-8T
Forged super alloy steel - Quenched and Tempered. Breakage test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. Brand:DAWSON/OEM Code:DS036
Forged alloy steel or carbon steel. Quenched and tempered. Suitable for G70 chain or G43 chain. Not for lifting, only for lashing or pulling. G43: Ultimate load is 3 times The working load limit G70: Ultimate load is 4 times The working load limit Regular mark: G70 G70 1/4 FORGED. G43 G43 HIGH TEST FORGED 1/4 Brand:DAWSON/OEM Code:DS126 Size:0.40-6.93kg