1. Material: elastomer 2. Size: 302*302*13mm 3. Unit Weight:308 ±5g 4. Color:White, gray, red, yellow, light green, dark green, light blue, dark blue 5.Warranty:5Y Surface treatment: The surface is soft frosted with soft touch and good anti-slip performance Chamfer treatment on the hollowed surface to prevent skin scratches The surface layer is divided into 25 squares, which breaks down the surface stress and prevents warping and deformation Double ear buckle connection design, good stability, prevent the floor due to thermal expansion and contraction fracture, drum and deformation Supporting system: 361 support points at the bottom, uniform force, not easy to deformation Ambient temperature range: 70-40 Ball rebound rate 95% Coefficient of sliding friction: 0.6 Shock absorption: 23.4% vertical deformation: 1.2mm Slip resistance value (BPN20): 56 inflaming retarding: I Odor grade: 2
Court floor, sports floor.
Court floor tiles, garage floor tiles, plastic floor tiles.
Hail protection car cover , car floor mat , car trunk mat and other car accessories.
Panels produced by this machine are mainly used as the floor decking. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness.This not only can save steel plate, but also can decrease the load capacity of floor decking.Therefore, steel quantity of the whole project is decreased and can save money surely. 1.Processing material Ppgi, gi 2.Processing thickness(mm) 0.6-1.6mm 3.Main frame/ middle plate H400 steel beam/ 20mmsteel plate 4.Material of rollers 45steel, with hard chrome coated 5. Diameter of shaft 100mm 6.Production of speed 14-18m / min 7.Cutting modle Hydraulic profile cutting 8.Length measurement Encoder 9.Total power 11kw+4kw 10.Voltage 380v 50hz or at buyer's request
Panels produced by this machine are mainly Used as the floor decking in russia. It has Features of high wave, high strength, high Degree automatically producing, lower cost and So on. This panel is set up with concrete, which Has good adhesiveness. This not only can save Steel moulding plate, but also can decrease The load capacity of floor decking. Therefore, Steel quantity of the whole project is Decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel Sheet, aluminium steel sheet, and galvanized Steel 2.Applied slab thickness:0.3-1.0mm 3 charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15m*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380v 50hz or at buyer's request 11. Material of rollers: 45# steel, with hard Chrome coated 12.Testing material: q195 13.Operation model: button + touch screen Processing technique and deployment: Uncoiler Feeding platform Molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll Forming---measure length---cutting the Panel---panels to the supporter Usagethis machine products used in high Building contruction, it can save the steel Panels and the floor loading weight in the Same loading weight condition then save the Investment cost.
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make It appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially Suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing materialPpgi, gi 2.Processing thickness(mm)0.5-1.6 mm 3.Material of rollers 45# steel, with hard chrome coated 4.Diameter of shaft 40mm 5.Production speed 0-25m/min 6.Roller driven Gear transmission 7.Cutting model Hydraulic profile cutting 8.Length measurement Encoder 9.Control style Plc 10.Operation model Button + touch screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 C-shaped keel can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. 1.Processing MaterialPPGI,GI 2.Processing Thickness(mm)0.5-1.6 mm 3.Material of Rollers 45# steel, with hard chrome coated 4.Diameter of Shaft 40mm 5.Production Speed 0-25m/min 6.Roller Driven Gear Transmission 7.Cutting Model Hydraulic Profile Cutting 8.Length Measurement Encoder 9.Control Style PLC 10.Operation Model Button + Touch Screen Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table
Products made by this machine is easy to install, used together with different colors can make it Appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel Can be assembled arbitrarily, and they are connected tightly.They can be fixed on the device which Is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable To use in bedroom, kitchen, washroom, corridor and so on.
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on., this panel is set up with concrete, which has good adhesiveness. This not only can save steel plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely.,
Panels produced by this Decking Steel Production Line are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This Decking Steel Production Line is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler
Panels produced by this floor deck roll forming machine are mainly used as the floor decking in russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This floor deck roll forming machine is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15m*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw Processing technique and deployment: Uncoiler Feeding platform Molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler
Panels produced by this floor deck roll forming machine are mainly used as the floor decking in russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This floor deck roll forming machine is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15m*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw Processing technique and deployment: Uncoiler Feeding platform Molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler
Panels produced by this Decking Floor Tiles Production Line And Machinery are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This Decking Floor Tiles Production Line And Machinery is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler
Condition: New Type: Other Tile Type:Steel Use:Roof Production Capacity: 6-12m/min Place of Origin: Hebei, China (Mainland) Brand Name: XH Model Number: XH65-185-555 Power(W): 11.5kw Voltage:380V Dimension(L*W*H): 11000mm*1000mm*1200mm Weight: abuot 10 tons Certification: BV Warranty: 1year After-sales Service Provided: Engineers available to service machinery overseas color: blue/green
Machine parameter Type XH51-342-1025 Floor deck Feeding width 1250mm Effective width 1025mm Thicknes 0.8-1.5mm Size about 18000mm*1000mm*1200mm Main Frame 300H steel Weight about 14tons Diameter of shaft Φ80, 45#steel Material of roller 45#steel Main motor power 18.5kW Number of rollers 30 stand rollers Control system PLC computer controller Speed 6-8m/min Chain 2 inches Our main products include: Roll forming machine: Wall steel panel roll forming machine Roof steel tile roll forming machine Corrugated steel tile roll forming machine Color coated steel glazed tile roll forming machine JCH roll forming machine Double deck roll forming machine C/Z type steel purlin roll forming machine Color steel sandwich panel forming machine Steel floor deck roll forming machine Highway guardrail roll forming machine Shutter door roll forming machine Downpipe roll forming machine Decoiler/ Recoiler Bending/Shearing/Slitter/Leveling machine Other cold roll forming machine as per your special requests.
Panels produced by this machine are mainly Used as the floor decking in russia. It has Features of high wave, high strength, high Degree automatically producing, lower cost and So on. This panel is set up with concrete, which Has good adhesiveness. This not only can save Steel moulding plate, but also can decrease The load capacity of floor decking. Therefore, Steel quantity of the whole project is Decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel Sheet, aluminium steel sheet, and galvanized Steel 2.Applied slab thickness:0.3-1.0mm 3 charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15m*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380v 50hz or at buyer's request 11. Material of rollers: 45# steel, with hard Chrome coated 12.Testing material: q195 13.Operation model: button + touch screen Processing technique and deployment: Uncoiler Feeding platform Molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll Forming---measure length---cutting the Panel---panels to the supporter Usagethis machine products used in high Building contruction, it can save the steel Panels and the floor loading weight in the Same loading weight condition then save the Investment cost.
Panels produced by this machine are mainly used as the floor decking in Russia. It has features of high wave, high strength, high degree automatically producing, lower cost and so on. This panel is set up with concrete, which has good adhesiveness. This not only can save steel moulding plate, but also can decrease the load capacity of floor decking. Therefore, steel quantity of the whole project is decreased and can save money surely. Technical pararmeter of product line: 1.Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel 2.Applied slab thickness:0.3-1.0mm 3 Charge in width:1000mm 4. Line speed:16m--18m/min 5. Rolling rows:16rows 6. Rolling diameter:70mm 7. Dimensions15M*1.9m*1.4m 8. Weight:5t 9. Power:11kw+4kw 10.Voltage: 380V 50HZ or at buyer's request 11. Material of Rollers: 45 steel, with hard chrome coated 12.Testing Material: Q195 13.Operation Model: Button + Touch Screen Processing technique and deployment: Uncoiler Feeding platform molding core Molding shearing mechanism Hydraulic station Computer control cabinet Counter Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler Working flow: Decoiling the sheet--sheet guiding---roll forming---measure length---cutting the panel---panels to the supporter Usage This machine products used in high building contruction, it can save the steel panels and the floor loading weight in the same loading weight condition then save the investment cost.
