Cable drag chains are widely used in the machine tools where reciprocating motion existing, to drag and protect cables, oil pipes, gas tubes and water tubes. Those drag chains are made of reinforced nylon pa66, with the advantages: Carton /wooden case
Seismic Cable: 6 Channel seismic cable with KCK screw fit female takeouts as per attached drawing, interval 0.8m with 0.8m at one end. Total length 4.8m,cable O.D.8.5mm,27 cores. No connector. Seismic Cable -A 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with NK-27-21C Female connector(equivalent) at each end, total seismic cable length 130m. Seismic Cable -B 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with 61-pin Bendix connector PT06-24-61S(SR) Female (equivalent) at each end, total seismiccable length 130m. Seismic Cable: 12 channels. geophone cable with NK27 female connector at each end, spacing with molded split spring take-out, interval 3m, lead-in 3m at each end. total cable length 39m. Seismic refraction array,12 channels,5m between channels, ordinary split spring take outs and terminated with NK-27 Female adaptor at each end. Lead in 5m at each end. Total array length 65m. Seismic Cable 24 channel with 1m takeouts ( molded split plate takeouts )- Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated. Seismic Cable 24 channel with 1m takeouts (kooter male, connection parallel to the cable) - Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated.
Seismic Cable: 6 Channel seismic cable with KCK screw fit female takeouts as per attached drawing, interval 0.8m with 0.8m at one end. Total length 4.8m,cable O.D.8.5mm,27 cores. No connector. Seismic Cable -A 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with NK-27-21C Female connector(equivalent) at each end, total seismic cable length 130m. Seismic Cable -B 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with 61-pin Bendix connector PT06-24-61S(SR) Female (equivalent) at each end, total seismiccable length 130m. Seismic Cable: 12 channels. geophone cable with NK27 female connector at each end, spacing with molded split spring take-out, interval 3m, lead-in 3m at each end. total cable length 39m. Seismic refraction array,12 channels,5m between channels, ordinary split spring take outs and terminated with NK-27 Female adaptor at each end. Lead in 5m at each end. Total array length 65m. Seismic Cable 24 channel with 1m takeouts ( molded split plate takeouts )- Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated. Seismic Cable 24 channel with 1m takeouts (kooter male, connection parallel to the cable) - Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated.
We specializes in producing the spiral welded Steel pipe, also known as submerged arc welded pipes(ssaw).Outsider diameter: 219-2520mm, wall thickness: 6-25mm Production capacity: 150000tons/year And all of our product have been strictly tested through x-ray Inspection, hydrostatic inspection and eddy current inspection and so On to guarantee the quality of our products.
Function for bellow cover: water-proof, oil-proof, anti-corrosion, fire-proof (1)structure of accordion bellows: eratures, oil and cooling fluid The highest temperture: 4000 ' c The speed can up to 200m/min (3)mounting: it can be mounted in either way, intemally or externally or vertically or horizontally. Carton/wooden case
Dongjun metal telescoping way covers are custom-designed covers for any machine tool application requiring protection of machine ways and screws. Wooden cases
ZT-75 to 600 fully automatic cable tray rolling machine produce d by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control penel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacring a both superiority and quantity cable trays in less time.The ZT-75 to 600 fully automatic cable tray rolling machine is composed by the following elements: hydraulic decoiler, leveling system, punching machine,coil feeder, mian rolling forming machine and receiving table. Zhongtuo cable tray roll forming machine is composed by the following elements: de-coiler Parameter: width of material: 225-1020mm thickness: 1-2mm; Inner diameter of coil: Ï?508mm;inner expansion range: Ñ?480-520 mm; The maximal of Diameter: Ï?1500mm; The Maximal of loading: â?¤5T Motor power: 5.5kw frequency change control Press material type: pneumatic press material Feeding speed: 0-15m/min, adjustable Leveling machine of fully automatic cable tray rolling machine A: working roller: nine rollers type leveling machine B: Feature of structure: after the quenching and tempering, chrome-plating processing, the rigidity, surface roughness of the roller etc. are all enhance greatly; It is composed by the clamping roller and the leveling roller, the clamping roller may the independent control, the leveler has one pair of horizontal guide roller and two pairs of vertical guider roller and easy to adjust by hand wheel. Between the leveler and the feeding device, there is optical sensor, sends out the feedback signal to the control system, the control system sends out the instruction to the frequency conversion motor to change speed, Achieves the uninterrupted level goal. servo feeding machine A: function: material feeding b. Feature: Uses the servo motor-driven .Multistage type feeding: May input 10 group of different feeding lengths. The liquid crystal touching screen demonstrated is advantageous for the change, establishes various technical parameters. The auto-induction start system and the punch press linkage (control punch press start). Punching press of Model of punching press: JF21-120B Roll forming part Forming station: 14sets Forming variety: bridge frame The diameter of the roller axis: ï¿ 85mm Hydraulic cutting Cutting type: hydraulic cutting Blade type: close type die cavity cutter Hydraulic power:5.5kw Material of blade: Cr12, quench treatment, hardness HRC56-58 Quantity: 9 (depend on customer request) Run-out table
Ignition cable.
Optical cable terminal box, optical cable closure.
Optical cable splice closure series, cable terminal box series, odf, ddf distribution box, cable distribution frame series, distribution box series, fiber cable cross-connecting cabinets, cabinets series, cable-dispart box, junction box, cross-connect box, optical pass components series, catv equipment series, fitting series of optical cable and optical fiber.
Cable drag chain, flexible cable carriers, cable carriers, plastic, steel towline, schlepp ketten, machine tool accessories, machine lamp, bellow covers, rectangular metal hose, conduit protection sleeve, machine tool guide shield.
Material: Steel Wire Material thickness fence: 4 / 2.5 mm Mesh Width: 60 x 60 mm The Element: B x H 775 x 640 mm Height arc center: 785 mm The rod: L x Ø 980 x 7,5 mm Green powder coated (RAL6005)
Steel fence panel, steel fence post, steel fence post cap, ; metal garden gate, steel garden door, wire mesh fence, gabion, greenhouse.Shipping
Ftth telecommunication products.
Nails, mesh, steel clamp.
Plastic cable chain's feature 1. Made by PA 2. Load bearing 3. Suitable for quick movements 4. Screw driver is able to open. Carton or wooden case or depends on the customer's requirement.
Metal parts ,glass mirror , glass , stampings , sheet metal parts , cnc machining parts , auto spare parts ,furniture parts.Manufacture
Optical cable splice closure This product belongs to open structure airproof tie-in system of machine pressure. It is widely used for communication, network system, cabled t.V. Of catv, the fiber optic cable by network, the direct and branch connection .It is made from engineering plastics with high and strong function. It also has dependable functions of airproofing and enduring lightning strike.
Cable terminal box This product is widely used in the city and country cable network, the transferring system of data and graph, the catv wired tv series and the direct and branch connection of the indoor cable which acts as pigtail storage and connector protection. It is made from cold-rolled steel sheets by electrostatic plastic spraying, so it has proper structure and neat looking. We can fix the cable by strengthening core in the terminal box, and its ports can be replaced according to practical engineering requirements. The panel of this product , on which adapter is installed can be replaced optionally by fc, sc, st, lc and so on. It is also suitable for both ribbon optical fiber cable and common optical fiber cable.
Optical fiber cable distribution frame This product is used as the terminal ending and distribution of the main optical fiber cable of the central office in the optical fiber cable and communication system. It can connect , distribute and dispatch the fiber circuit. It is the distribution connection equipment between the optical fiber cable and the fiber cable communication system.
