Find Verified Aluminum Ingots Suppliers, Manufacturers and Wholesalers

Raw materials specifications
Type of materials Hot aluminum coils, aluminum alloy coils
Thickness 0.20mm -1.00mm
Width 900mm-1300mm
Coil Weight Maximum 10Tons
Inner diameter Φ508mm
Outer diameter Maximum Φ1800mm
Finished products parameters:
Type of materials Hot aluminum coils, aluminum alloy coils
Thickness 0.20mm -1.00mm
Width 900mm-1300mm
Coil Weight Maximum 10Tons
Inner diameter Φ508mm
Outer diameter Maximum Φ1800mm

Raw materials specifications
Type of materials Hot aluminum coils, aluminum alloy coils
Thickness 0.20mm -1.00mm
Width 900mm-1300mm
Coil Weight Maximum 10Tons
Inner diameter Φ508mm
Outer diameter Maximum Φ1800mm
Finished products parameters:
Type of materials Hot aluminum coils, aluminum alloy coils
Thickness 0.20mm -1.00mm
Width 900mm-1300mm
Coil Weight Maximum 10Tons
Inner diameter Φ508mm
Outer diameter Maximum Φ1800mm

So far forever has already had many sucessful cases for aluminum bill induction heater, such as diameter 90mm aluminum bill induction heater,
Aluminum bill induction heater features

1.aluminum bar diam diameter10-300mm
2.length: not limited
3.pow100-8000kw
4. temperaturte control: closed loop temperature control system, which can adjust the temperature automatically.
5. heating temperature:450-500 degree C.
6. heating way: magnic induction heating

Aluminum bill induction heater advantage,

1).,full power output
2).,equipment has features of easy operating, reliability, light weight, and no risk from high pressure.,
3).,installation is simple, just need to connect power and power, a few minutes to comple.,
4).support 24 hours of continuous use, high efficiency and energy saving.
5).high induction heating speed, high efficiency and uniform heating, so there is no lack of welding and solder leakage.,
6).oxidation area is small, after welding, the bar is beautiful, firm and durable

Welcome your inquiry for forever aluminum bill induction heater

-

This line can be set according to customers" need, length is positioning controlled by computer.It
Can be exactly positioned, and shown timed on the touchscreen, as well as automatically count and
Revise. This line suitable to process outer side of sandwich panel, materials sheet are colored steel
Sheet, aluminium steel sheet, stainless steel sheet and so on.
This line adopts advanced technique, which integrates gas, electricity and machinery, and this
Line is the special equipment for processing colored steel sandwich panel. Its working speed can
Be adjusted by frequency converter, and it can process sandwich panel at one time. The whole line
Consists of decoiler, molding core, compound par.

Products features:

Beading equipment Speed:10m/min
Power:2.2kw or according to the profile
Diameter of roller:according to the profile
Power supply:motor
Material of roller’s 40cr quenched and tempered, chrome
Roll forming Frame:cantilever structure
Speed:10m/min
Power:4kw up, 7.5kw down
Shaft diameter:50 mm
Distance roller head:350mm
Rollers: 11 up, 18 down

Rock wool delivery device
Motor power:2*1.5kw
Speed:8m/min
The maximum transport width:1200mm
Dispensing systems Effective volume:150l
Unit motor power:10kw
Roll forming machine Length:10mm
Width:1200mm
Lifting speed:200mm/min
Drive motor power:2.2kw*4
Lifting motor power:1.5kw*4
Speed:10 m/min
Cutting part Cutting motor power:7.5kw
Lateral movement motor power:1.1 kw
Traversing speed:150 mm/s
Cutting width:1300 mm
Cutting error:â±2mm

Techical description:
1)Decoiler
Decoiler Type: Manual decoiler
Weight capacity of decoiler: 5.0 T
Inner diameter: 350-550mm
Outer diameter: 1200mm

2)Feeding and Leveling Device
It used for making the material flat before feeding into the roll forming machine.
Roller: 7 rollers, 4 up, 5 down

3)Rolling Forming System
It can change C Z shape automaticly and different size you just input data in PLC.
Main motor power: 11KW
Speed of forming: 8-12m/min
Material of roller: 45 steel polished and coated with chrome HRC55-60
Roller: 15 groups rollers
Material of main shaft: High grade No. 45 steel after treatment
Diameter of main shaft: ? 80mm
Driven: 1''chain

4) Hydraulic Punching & Cutting
Punching Type: Hydraulic Punching
Punching material: Cr12 steel after treatment
Punching die: Cr12 steel after treament
Cutting material: Cr12 steel after treatment
Hydraulic motor power: 5.5KW

5)Control system
Type: PLC Frequency Control System with touch screen
PLC Brand: Japan Panasonic
Encoder Brand: Omron
Length Error: ± 2mm


Main features of C Z purlin roll forming machine


The advantages of CZ purlin machine AUTOMATIC size-change type are as follows:
1.Produce different purlin size without changing rollers or spacers.
2.Easy operation, low maintenance cost
3.Infinite sizing(any size within machine range),help to save material
4.Optional Punch hole at any position of purlin web side and flange side


Technical parameter of product line
A pplied plank stuff:color armor plate
Applied slab thickness:1.8mm-3.5mm
Line speed:16-18m/min
Roll diameter:80mm
Hydraulic automatic uncoile
Dimension:11.5m*1.9m*1.4m
Weight:5t
Power:4kw
Hydraulic station power:4kw
Processing flow:
decoiling----loading----molding----cutting----off-discharging

Equipment parts
steel strip supporting frame
Feeding platform
Automatic shearing system
Hydraulic system
Steel strip unfolding system
Computer control system (imported computer)
High-precision automatic counter
Receiving table
Optional equipment
Hydraulic automatic uncoiler

Working space and workman for the equipment
1. Ground-level land
2. 5T overhead travelling crane
3. Space for storing the material
4. Space for laying the machine
5. Road for vehicle moving
6. Workman: 2, operator and porter

Z-shaped purlin is good in bending resistance, straightness, and it can cut, punch

Automatically, it is very easy and convenient to use.It can be used as bearing structure in big and

Medium sized building, such as factories, warehouses, garages, hangars, gyms, exhibitions, theater

And so on.
Applied plank stuffColor armor plate
Applied slab thickness1.8mm-3.5mm
Line speed
16-18m/min
Roll diameter80mm
Dimension11.5m*1.9m*1.4m
Weight5t
Hydraulic station power4kw
Working space and workman for the equipment:
1. Ground-level land
2. Â?¥5t overhead travelling crane
3. Space for storing the material
4. Space for laying the machine
5. Road for vehicle moving
6. Workman: 2, operator and porter

made of sheet glass or float glass

long life performance

used for wall mirror , decorative mirror , ect

seaworthy packing

Product Description
High Frequency Welded Stainless Steel Spiral Fin Tube Extruded Wound Finned Tube Aluminum/ Copper Fins

Finned Tube Aluminum Fins Heat Exchanger Tube Product Description

The spiral fin tube economizer is a newly type heat transfer equipment, consisting of spiral fin tubes to overcome the serious abrasion and short service time.Which consisted of series of spiral finned tubes, the headers of inlet and outlet, bend, frame and other auxiliaries

Structure arrangement: in line/staggered arrangement

Finned Tube Aluminum Fins Heat Exchanger Tube Features

1. The equipment body can be designed into many modules to ensure the long term and stable running.

2. Compact structure which can enlarge the heat exchanging area in order to add the heat transfer area and less leakage.

3. Improve the heat transfer efficiency.

4. Structure arrangement: In line or staggered arrangement.


Finned Tube Aluminum Fins Heat Exchanger Tube Application

Aftercoolers, air coolers, air heaters, charge air chillers, condensers, convection heaters, electric heaters, evaporators, fluid coolers, gas coolers, heat pipes, hydrogen coolers, industrial tumble dryers, intercoolers, immersion heaters, oil coolers, radiators, refrigeration, solvent recovery and steam to air heat exchangers.



Technical parameters

PRODUCT TYPE TUBE MATERIAL FIN MATERIAL TUBE SIZE FIN SIZE
Heat Exchanger Finned Tube Extruded Fin Tube All Kind of Material can be applied Aluminum A1100 15.88~50.8 7~11.5FPI
Fin Height Max 16mmH
L-Foot Fin Tube All Kind of Material can be applied Copper C1100, C1220 12.70~50.8 7~11.5FPI
(Wrap On Type) Fin Height Max 16mmH
G-Fin Tube (Embedded Type) Aluminum A1100, A1050, A1060
High Frequency Welded Finned Tube A179 Carbon Steel Tube Carbon Steel Tube 12.70~160 1.5~7FPI
Stainless Steel Tube Stainless Steel Tube 0.8~3.2mm. Thickness
Alloy Steel Material Alloy Steel Material
Integral Copper & Copper Alloy High Finned Tube C12200, C11000, C70600 C12200, C11000, C70600 15.88~22.23 5~9FPI
Max 12mm. H
Oval Finned Tube Carbon Steel Tube Carbon Steel Tube All Size Available 5~15FPI
Stainless Steel Tube Stainless Steel Tube
Alloy Steel Material Alloy Steel Material
Copper & Copper Alloy Tube Copper & Copper Alloy Tube
Monometallic Fin Tube Low Fin Tube Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy, etc. -- 9.52~40 12, 16, 19 28 FPI, etc.
Turbo-C Tube
Turbo-E Tube
Corrugated Tube All Kind of Material -- 6.35~40 2~9FPI
High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided

Description of Spiral Finned Tubes:

The spiral fin steel pipes currently used are mostly wound, high frequency welded and brazed spiral fin steel pipes.
High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided