Ferry car is used to move mold from one rail to another. Advantages: 1. Highly-automatic: the ferry car can walk automatically. Only one worker can finish the work. Compared to the traditional way, this car is more timesaving and needs less labor intensity. 2. Highly-efficiency: the work can be finished only by pushing the button. -
Gongyi Xiaoyi Shield Machinery Manufacturing Factory produces automatic dual stacking machine. This machine is available for autoclaved aerated block, foam concrete block, hollow brick and so on. This kind of stacking machine is highly automatic,so it can increase work efficiency. In a word, it is the best choice of en-trucking and stacking.
Cutting machine is designed to cut blocks transversally and longitudinally. Advantages: 1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work. 2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have. 3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
Cutting machine is designed to cut blocks transversally and longitudinally. Advantages: 1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work. 2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have. 3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
The mold is a basic equipment to make blocks. The production capacity depends on the amount of the mold. The combination of the bottom of the mold and the wall of the mold is flexible. For example, you can produce 100 cubes of bricks by using 50 walls and 100 bottoms. So you can decrease the investment by buying more bottom and less wall. One can also save the cost by using the cement floor as the bottom of the mold.
What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
The mold is a basic equipment to make blocks. The production capacity depends on the amount of the mold. The combination of the bottom of the mold and the wall of the mold is flexible. For example, you can produce 100 cubes of bricks by using 50 walls and 100 bottoms. So you can decrease the investment by buying more bottom and less wall. One can also save the cost by using the cement floor as the bottom of the mold.
The mold is a basic equipment to make blocks. The production capacity depends on the amount of the mold. The combination of the bottom of the mold and the wall of the mold is flexible. For example, you can produce 100 cubes of bricks by using 50 walls and 100 bottoms. So you can decrease the investment by buying more bottom and less wall. One can also save the cost by using the cement floor as the bottom of the mold.
What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
Gongyi Xiaoyi Shield Machinery Manufacturing Factory produces automatic dual stacking machine. This machine is available for autoclaved aerated block, foam concrete block, hollow brick and so on. This kind of stacking machine is highly automatic,so it can increase work efficiency. In a word, it is the best choice of en-trucking and stacking.
Gongyi Xiaoyi Shield Machinery Manufacturing Factory produces automatic dual stacking machine. This machine is available for autoclaved aerated block, foam concrete block, hollow brick and so on. This kind of stacking machine is highly automatic,so it can increase work efficiency. In a word, it is the best choice of en-trucking and stacking.
Gongyi Xiaoyi Shield Machinery Manufacturing Factory produces automatic dual stacking machine. This machine is available for autoclaved aerated block, foam concrete block, hollow brick and so on. This kind of stacking machine is highly automatic,so it can increase work efficiency. In a word, it is the best choice of en-trucking and stacking.
Cutting machine is designed to cut blocks transversally and longitudinally. Advantages: 1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work. 2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have. 3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
Cutting machine is designed to cut blocks transversally and longitudinally. Advantages: 1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work. 2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have. 3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
