Gravity Davit for rescue boat and totally enclosed lifeboat The Gravity Davit is manufactured and tested under the approval of major classification societies in compliance with the requirements of MSC.216(82)-Amendments to SOLAS 1974,and MSC.48(66)-International codes for lifesaving appliances as amended MSC.218(82)&MSC.272(85). The davit is a hinged type davit and lowering lifeboat on its own weight without need of power from ship. The operator inside the lifeboat could control boat lowering or stopping by means of remote control ropes. The operator on deck can observe the lifeboat during whole operating process of lowering and hoisting. The boat can be controlled in two ways, either by means of a remote control wire from within the lifeboat or by lifting the brake handle of the winch directly. Recovery of the lifeboat with its launching crew is realized by using the electric driven winch. The boat davit mainly consists of davit arm, frame, stop unit, floating block, pivot unit, limit unit, fastening unit, gripe lashing unit, remote control unit within boat and remote control unit on board (Also including rapid recovery unit for rescue boat). It is approved by Class like ABS, CCS, BV, DNV-GL, NK, KR, RM-RS, and etc.
This 4.5 meter full rigid FRP GRP rescue boat /work boat body material is made of flame-retardant polyester resin glass reinforced plastic, reinforcing material is 0.2mm, and 0.4mm thick alkali-free glass cloth, glass surface is used for boat surface, and buoyant material is selected for perfusion molding polyurethane foam. All steel parts are galvanized or stainless steel. Each frp / grp rescue boat will undergo strict tests in accordance with SOLAS and IACS rules before they leave our factory. Major Parameters: It conforms to relevant SOLAS rules and LSA codes. The rated capacity is 6P and speed is not less than 6Knots. The engine with 25HP power. We have IACS certs like ABS, CCS, BV, RM-RS and etc.
we provide 99.95 % Tungsten Products Tungsten Boats Evaporation Boats for Vacuum Metalizing As a high performance materials, Pure Tungsten has high melting temperature, high density, low vapor pressure, low thermal expansion combined with good thermal conductivity, sufficient electrical resistance, high modulus of elasticity. Tungsten boat is widely used in metallizing, electron-beam spraying as well as sintering and annealing in reducing atmosphere in electronics and light industries. Manufactured by the special production line in our corporation, tungsten boats can provide reliable guarantee of product quality for the users by adopting excellent tungsten materials with high purity, advanced techniques as well as special treatment to the product surfaces. Tungsten boats are mainly used for evaporation or metalization of Al, Ni, Cu, Ag and many other metals in vaccuum furnaces.
22*2mm aluminum pipe Soft foam pad With two straps and accessory Capacity :75kg Black powder coated
Aluminum center console speed sport boat Length Beam Depth Draft Displacement 8.2m2.78m0.52m0.4m2.3tone Dry weightWaterline PowerSpeed Passenger 1.8tone7.6m250hp26-27knot8-10 Aluminum center console speed sport boat Length Beam Depth Draft Displacement 8.2m2.78m0.52m0.4m2.3tone Dry weightWaterline PowerSpeed Passenger 1.8tone7.6m250hp26-27knot8-10
The standard size of the canoe metostar offer have 12 13 14 16 18 . also accept customized. Capacity: about 250kgs Canoe weight: about 29kgs Color: wooden color Pattern accpet simple logo or pattern
Size in: 14ft, 16ft, 18ft wooden color material in cedar
Preferably stainless steel material, seiko manufacturing, corrosion resistance, no rust, durable. Surface for high precision electrolytic polishing treatment, precision brightness polishing degree is higher, not only can effectively rust prevention and corrosion, more high-end atmosphere. Full solid core design, real material, durable. Rigorous process, each process is strictly in accordance with the process standards, professional quality inspection, layer upon layer check.
ASME Standard Pressure Vessel of Spherical Head ASME-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Reactor vessel head-tank head manufacturer -founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from325*thk 8 to10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is10000*50mm; the max size with integral stamping technology is6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
Nickel alloy / Zirconium Crown dish head -Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is Φ10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, Tank heads, China OEM/ODM dished end head.
Quick Details Place of Origin:Shandong, China (Mainland) Brand Name:OEM Model Number:SF420-120 Type:Other length:420 width:200 high:60 color:customized weight:12kg air pressure:30psi load capacity:1100kg
Fiberglass boat, frp boat, fishing boat, inflatable raft boat, rigid inflatable boat, rib boat, pedal boat, stand up paddleboard, surfboard, water sport boat, white raft boat, rescue boat, lifeboat, kayak, .and gym equipment, fitness outdoor equipment, hex dumbbell, neoprene dipped dumbbells, olympic ez bars, neoprene dipped, kettlebell, outdoor camping tent, mountain tent, camping tents, picnic tents, beach tent, waterproof tent and so on....
Inflatable boat.
JABO remote control fishing bait boat.
Inflatable boats, rib boats, fiberglass fishing boats.
Vessels.
Yachts, boats, rowing boat , sailingboat, inflatable boat, rescue boat.
Water bikes, pedal boats, inflatble boats, kayak, electronic boats, SKI boards.
Wooden crafts boat.