Features: Made by windproof and waterproof breathable material. Shark skin soft shell fabric with warm inner fleece. Lined stand up collar. Stow-away hoodie. 2 shoulder pockets with 4" x 4" velcro patch panels. 2 zipper front pockets. Forearm pocket on the left side. Reinforced elbow. Double zipper back pocket. Sleeves with zippered underarm for ventilation. Drawstrings hood. Double zipper front opening. Interior waist drawstring. Adjustable wrist cuff. Light weight and flexible. Size chart: Small medium large x-large Chest circumference 43" 46" 49" 51" Sleeve length 28" 29" 30" 30" Body length 28" 29" 29" 30" As the general export package.
The substrate of double-side tape are paper, cloth as well as plastic film, coating uniformity with elastomer pressure-sensitive adhesive or resin adhesive in the substrate, is composed of substrate, adhesive as well as release paper. Application: good resistance to accelerated aging, apply for paste and connection of plastic parts, hardware and electronic parts, the car dashboard and decorating panels of air conditioners. Carton size:40cm 30cm 30cm.
Voltage: 220V/110V RF frequency: 6MHz RF energy: 0-50J/cm2 Temperature of probe: -2-85íµ Output power: 900W Size: 34í-35í-48cm Weight: 12Kg. There's a bipolar device in the handpiece probe, makes the electric current cycle in it. The great advantage of this setting, is to make uniform energy during the treatment.
Product has the advantage of web uniformity, soft feeling, high strength, strong absorbance and assured safety, good for a variety of wet wipes. It is sanitary with no irritation to skin, also good for medical bandage and gauze. It will not scratch or damage the surface while used in wipers. Our fabrics are well entangled and lint free with strong dust-absorbing capacity, favorable in kitchen and industrial wipers. Product Composition: Viscose and Polyester, Composite Fiber, Split Fiber, Bamboo Fiber, Corn Fiber, etc. Weight Range: 30~100g/m2 Roll Width Range: 100~2250mm Production Capacity: 4500T/Y Color: White.
DDN owns a complete spunlace line imported from Europe and uses high quality fiber to produce high quality fabric rolls applicable to household, medical and wipers. Our products have the advantage of web uniformity, soft feeling, high strength, strong absorbance and assured safety, good for a variety of wet wipes. It is sanitary with no irritation to skin, also good for medical bandage and gauze. It will not scratch or damage the surface while used in wipers. Our fabrics are well entangled and lint free with strong dust-absorbing capacity, favorable in kitchen and industrial wipers. Product Composition: Viscose and Polyester, Composite Fiber, Split Fiber, Bamboo Fiber, Corn Fiber, etc. Weight Range: 30~100g/m2 Roll Width Range: 100~2250mm Production Capacity: 4500T/Y Color: White.
It is mainly used for processing and slicing Saqima, egg tart cake, frozen rock candy and rice cookies, etc. Main characteristics 1. Double frequency conversion control, leveling and dicing at once. 2. It has multiple flattening structures, which can press flatly, thickness is uniform. 3. Frequency control, can meet different product needs. 4. Automatic cutting, saving time and labor. Economical and convenient.
Activated Bauxite is an excellent adsorbent material with multiple applications. Thermal activated bauxite is used for refining of lubricant oil and waxes. Ashapura’s activated bauxite is produced in controlled conditions to achieve maximum adsorption capacity. Activated bauxite is used in petrochemical industries to clarify and regenerate oils as aviation kerosene and paraffin. Our Activated bauxite is used as catalyst for desulfurization, deflourination, cracking, dehydrogenation, and dehydration reactions. It is used as desiccant in many chemical processes, i. e, to remove water in liquid or vapor from gases, vapors and liquids. Desiccant grade bauxite is placed towers or columns and moisture containing gas or liquid is passed through to get rid of water content. Transformer oil regeneration and reduction in color is an important application, where activated bauxite is used. It’s also finds use in the treatment of waste lubricant oils, motor oil, mineral oil and chemicals because of high adsorption capacity. Majorly these applications utilize percolation method. As a catalyst activated bauxite is used to enhance petrochemical reactions in petrochemical industry. The product is available in granular and powder form with various sizes and shapes. The uniform size distribution of Ashapura’s activated bauxite provides added advantage in afore said applications.
Geonet-geotextile draninage composites Composite draining net (called three-dimensional composite draining netíódrainage mesh) is a new type drainage geo-material. Cdn is made from hdpe by the way of partcular extruding moulding process.Having triple special structure. The rigidity of middle muscle is hugeíólongitudinal arrangmentíóforming drainage channel.It can maintain excellent performance even under the condition of high load.Double-back self adhering and water perocolation use compositely, having í¦anti-filterin--drainingí¬venting-protectingí¦synthesis performance and it is the most perfect drainage material. Features: 1.Good draining; 2.High tensile strength; 3.Reducing the rate of geo-weave inlaying core; 4.Bearing load of high pressure in long-term; 5.Good acid-resistant, extending the project life; 6.Shortening construction period, reducing cost, convenient construction. Application: Brdrain is a high flow, fusion-bonded, geonet-geotextile drainage composites. Brdrain is used primarily as a sheet interceptor drain behind retaining walls and as an internal interceptor drain for reinforced steep slopes.The strength and uniformity of the fusion bond between brdrain's layers makes them highly resistant to layer separation. This ensures excellent hydraulic performance and minimizes the potential for failure planes caused by the fabric portion of the composite sliding on the drainage core.
Selling Price:A potato weighs 75g to 150g in a 2.5 kg carton at $530 per ton and a potato weighs 150g to 250g in a 10kg carton at $800 per ton Specifications:Minimum Order quantity 28 tons (75g to 150g, packed in 2.5 kg carton, 150g to 250g, packed in 10kg carton, 28 tons for two specifications) Selling Point:Through 6S strict selection system, the company strictly controls the product quality from the beginning of planting, and continuously provides high-quality, safe and delicious potatoes to consumers, the product features "uniform size" , "uniform color" and "uniform cleanliness" , and can meet a variety of cooking needs of consumers. In order to ensure "every consumer to eat a safe and delicious potato" , the company initiated a 6s strict selection system for high-quality potatoes to provide an important guarantee of continuous output. First, the strict selection of land, strict control of six major professional planting plate, 23,000 acres of strict selection base for potato growth to provide high-quality soil. Secondly, selecting seed tubers strictly, introducing and cultivating high-quality seed tubers from Holland, fusing them with variety technology, and realizing high-quality virus-free potato production. Third, strict selection of cultivation, application of AI technology for field management, Uavs Directional Management, science and technology protection to ensure strict selection of harvesting. Fourth, strict selection of storage, the use of imported Dutch air-conditioned storage technology, automatic cleaning separation production system, presenting a safe and beautiful products. Fifth, strict selection of grade, the use of advanced Danish equipment, control high-quality potato output. Sixth, strict selection of packaging, strict selection of export-grade food packaging, with international certification standards manufacturing, environmental protection, beautiful, bring a new shopping experience.
Working Princile of 980nm +1470nm diode laser machine Vascular Lesion Therapy 980nm laser is the optimum absorption spectrum of porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs and finally dissipated. Physiotherapy / Pain Relief 980nm infrared therapy is to use light biostimulation effects in pathology aspects promote renewable. Reduce inflammation, relieve pain. Fungal Nail Removal / Onychomycosis 980nm laser nail fungus treatment works by focusing light energy on the infected area, which creates heat and ultimately destroys the living fungi. Lipolysis 980nm & 1470nm optical fiber dissolving grease is using the theory of plasma solar-thermal dissolve fat dissolve technology, through to uniform liquefied fat cells, when the body's natural metabolism the liquefied fat out of the body. Cutting Mode The 980nm laser is absorbed by pigments in the target tissue, achieving the function of carbonization and segmentation. The 1470nm is absorbed and segmentation. The 1470nm laser is absorbed by water molecules in the target tissue, achieving the effect of vaporization isolation. Skin Rejuvenation 980nm laser can stimulate the dermal collagen growth while vascular treatment, increase epidermal. EVLT 1470 is based on the thermal effect of the laser: it's a thermal ablation of the vessel wall. The 1470nm, which has a higher absorption in the tissues, improves the post-op comfort for the patient, while ensuring the optimal efficacy of treatment. Dental Suitable for intraoral and extraoral soft tissues (including marginal soft tissues) and interdental gums and free gingival epithelial lining): resection, implant restoration, gingival sulcus... PLDD Percutaneous Laser Disc Decompression (PLDD) is a surgical method in which a laser probe is inserted into the intervertebral disc space and laser energy is applied to achieve decompression and neuromodulation, thereby reducing pain.
1. Materials: Aluminum radiator and reflector; Frosted glass cover and AC85V-AC265V wide voltage constant current source 2. Applicable places: Hotel, Buildings, offices, conference rooms, schools, shops, home and other places where need indoor lighting. 3. Characteristics: Bridgelux LED chips, unique heat radiation design, high light, low energy consumption, low light attenuation, high light color purity and no double image, glare-free, etc. Beautiful appearance, easy installation, good universality and wide range of application. Obvious energy saving effect, long life-span and low maintenance cost. The LED luminous color and color temperature can be flexibly chosen according to different users' requirements. Normal connector: E27/E26/GU10/MR16/B22, convenient for use. Green and environmental protection and pollution-free, without lead, mercury and other pollution elements. Model Number: CSS-DB04-003, CSS-DB04-005 Flux >270 Lm: >450Lm Power Factor: >0.95 >0.95 Total Hamornical Distortion: 85% Lamps Efficiency: >91% >91% Installation Height: 1M 2M 3M 1M 2M 3M Average Illuminance: >48.4lux >12.1lux >6.6lux >75.5lux >19.6lux >10.4lux Illuminance Uniformity: >0.7 >0.7 Color Rendering Index: Ra>85 Ra>85 Beam Angle: (Horizontal Axis)120; (Vertical Axis)60 (Horizontal Axis)120; (Vertical Axis)60 Working Voltage: DC10-30V DC10-30V Input Voltage: AC85V-265V AC85V-265V Frequency Range : 50Hz-60Hz 50Hz-60Hz Color Temperature: 3,000K-7,000K 3,000K-7,000K Junction Temperature(centigrade):
30mm We are the Manufacturer and specialized in crystallized glass panel. We have over 268,000 square meter factory building in our factory, we can made rich colour and different size panel more than 1000 square meter per day. Crystallized Glass Panel, also known as Minicrystal Stones or micro crystal glass, is the "green" construction material of 21 century. It is made from best selected crude mineral after twice sintering under thousands of degrees high temperature. Harder than granite, stain resistant, uniform in colour. Most popular colours are crystal white and cream, it is suitable for interior & external wall cladding, flooring, kinds of tops, colomn or pillar. It can be made into sculptures also. Feature of this material: 1. Green environment protection 2. Higher Physical Stability: high brightness>95 and double polished, Bulk Specific Gravity: 2.7 g/cm3, etc. 3. Fine-textured & Glossy Appearance 4. Rich Colors & Wide Applicatione 5. Excellent Chemical Stability 6. Stain-resistance & Easy Maintenance 7. Easy to be bent, Economic & Time-saving Application: 1. Interior & external wall cladding 2. Flooring 3. Basin, Countertop, Table Thickness: 18mm Size: 2400*1200*18, 2700*1600*18, etc. Customized dimensions available upon request. Special size and thickness are welcome to enquire. Color: It uses metal oxidant as colorant, so it is available in various colors. Among which, beige, white and gray are the most popular colors. Especially, pure white is the particular color that no natural stone can replace. Pure White, Pure Black, Ivory yellow, Silver Grey, Yellow, Dark Gray, Dark Blue,Indigo, etc. If you have any question about that product welcome to enquire.
Vacuum Brazing Furnace Introduction: ShinTek can produce varieties of Vacuum Brazing Furnaces, including Vacuum Aluminum Brazing Furnace, Vacuum High Temperature Brazing Furnace, Vacuum Diffusion Brazing Furnace and so on… Our Vacuum Brazing Furnaces can be used in a wide of industries, including Stainless Steel, Copper alloy, high temperature alloy, Titanium alloy, Hard metal, ceramic metallization, silver-copper, aluminum, nickel alloy, electric radar board antenna, radiator, compensation, PTC heater, oil radiator, plate-fin heat exchanger and so on… Vacuum Brazing Furnace Specifications: Model STVF-AB-120 STVF-AB-200 STVF-AB-380 STVF-AB-580 Working zone size 1000*600*600 2100*900*900 3000*900*900 5800*1000*1200 Load (KG) 500 2000 3000 6000 Power 120KW 200KW 380KW 580KW Max. temperature 750? Temperature uniformity +/-5? Ultimate vacuum level (Cold) 8*10-4 Pa Leakage rate =0.4 Pa/h Remark: The Vacuum Brazing Furnace can be customized for your specific project. Vacuum High Temperature Brazing Furnace: Model STVF-B-65 STVF-B-120 STVF-AB-150 STVF-AB-220 Working zone size 600*400*400 750*500*500 900*600*600 1200*800*800 Load (KG) 200 300 500 1000 Power 65KW 120KW 150KW 220KW Max. temperature 1320? Temperature uniformity +/-5? Ultimate vacuum level (Cold) 8*10-4 Pa Leakage rate =0.5 Pa/h Remark: The Vacuum Brazing Furnace can be customized for your specific project. Vacuum Brazing Furnace features: (1) Vacuum Brazing Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Brazing Furnace – High vacuum level, enable it can be used for a wide of industries; (3) Vacuum Brazing Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten… (4) Vacuum Brazing Furnace – Reasonable hotzone design enable a high temperature uniformity; (5) Vacuum Brazing Furnace – Friendly control system.
Main characteristics The mixer adopts far-infrared plate heating, uniform heat transfer, surface of barrel is coated with non-stick layer, the mixing effect is better. Equipped with automatic temperature control system, temperature adjustment is more convenient. Technical Parameters: Model Production capacity Temperature control range Overall power Dimensions,mm Weight,kg RDBTJ-400W 3-8kg/time 0~130° 4.1kw 800Ã?1400Ã?820 120 RDBTJ-400 3-8 0-130 4.1 800*1400*820 320 RDBTJ-460W 5-12kg/time 0~130° 4.1kw 800Ã?1460Ã?1020 138 RDBTJ-650W 12-20kg/time 0~130° 4.1kw 800Ã?1650Ã?1600 160
Main characteristics 1) Produced products are crispy and tasty, color is uniform; 2) Heating temperature is automatically adjusted; 3) Feeding amount is adjustable, adjustment is simple; 4) Size and length of roll bar can be changed at will according to customer requirements. 5) The equipment frame is welded by stainless steel square pipes, does not rust and is easy to clean. 6) Material of all parts in contact with raw materials (except frying plate) is stainless steel, food-grade silicone. 7) The equipment has high production efficiency and small size, which can be installed in parallel in production line for mass production. 8) Operation of the equipment is stable, all main components are imported. 9) It can greatly reduce labor load of workers, it's easy to operate.
Description ADSS preformed tension clamp is designed for connecting and fastening the ADSS fiber to the overhead pole. Feature 1) quick and easy installation 2) distribute the stress uniformity 3) guarantee no cable damage or slipping 4) strong resistance to corrosion and cruel environment 5) made of aluminum alloy, aluminum clad steel and galvanized steel Order Tips 1- confirm the cable type 2- confirm the cable diameter 3- confirm the span and the rated tensile strength 4- the material can be aluminum alloy, aluminum clad steel or galvanized steel Our service 1, Fast Response Time 2, Quality and Certified Products3, Resonable Price 4, Cheap and Reliable Transportation 5, 7*24 Hours After Sales Service
The P110 clamp current transformer is a high performance AC Clamp current probe with excellent transformation and low phase shift. The high quality magnetic permalloy core and uniform windings provide for accurate measurements up to 1000AAC/250AAC/600AAC. The ring type jaw permits good magnetic conduction and cable positionings. Provide excellent RMS capabilities and reliable signal reproduction. FEATURES
Vacuum Annealing Furnace Introduction: ShinTek Vacuum Annealing Furnaces can be used for annealing varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc… Vacuum Annealing Furnace Specifications: Model STVF-A-80 STVF-A-100 STVF-A-150 STVF-A-200 Working zone size 600*400*400 750*500*500 900*600*600 1200*800*800 Load (KG) 200 300 500 1000 Power 80KW 100KW 150KW 200KW Max. temperature 1100? Temperature uniformity +/-5? Ultimate vacuum level (Cold) 5*10-4 Pa Leakage rate =0.67 Pa/h Remark: The Vacuum Annealing Furnace can be customized for your specific project. Vacuum Annealing Furnace features: (1) Vacuum Annealing Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Annealing Furnace – High vacuum level, enable it can be used for a wide of industries; (3) Vacuum Annealing Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten… (4) Vacuum Annealing Furnace – Reasonable hotzone design enable a high temperature uniformity; (5) Vacuum Annealing Furnace – Friendly control system.
Vacuum Carburizing Furnace Introduction: ShinTek Vacuum Carburizing Furnace can be used for Quenching and Carburizing varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc… Vacuum Carburizing Furnace Specifications: Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500 Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600 Load (KG) 60 150 250 500 800 1000 2500 Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW Max. temperature 1350? Temperature uniformity +/-5? (can achieve +/-3?for some specific project.) Ultimate vacuum level (Cold) 5*10-4 Pa Leakage rate =0.67 Pa/h Remark: The Vacuum Carburizing Furnace can be customized for your specific project. Vacuum Carburizing Furnace features: (1) Vacuum Carburizing Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Carburizing Furnace – High vacuum level, enable it can be used for a wide of industries; (3) Vacuum Carburizing Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten… (4) Vacuum Carburizing Furnace – Reasonable hotzone design enable a high temperature uniformity; (5) Vacuum Carburizing Furnace – Friendly control system. The main difference between Oil Quenching and Gas Quenching: 1. Oil Carburizing – Total investment is lower; 2. Gas Carburizing – Small deformation on the parts after treatment; Do not need clean after treatment.
Vacuum Heat treatment Furnace Introduction: ShinTek can produce varieties of vacuum heat treatment furnace, including Vacuum Quenching Furnace, Vacuum Annealing Furnace, Vacuum Tempering Furnace, Vacuum Carburizing Furnace etc…which can be used for heat-treating varieties of materials, such as High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy die, Ti alloy, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal etc… Vacuum Heat Treatment Furnace Specifications: Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500 Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600 Load (KG) 60 150 250 500 800 1000 2500 Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW Max. temperature 1350? Temperature uniformity +/-5? (can achieve +/-3?for some specific project.) Ultimate vacuum level (Cold) 8*10-4 Pa Leakage rate =0.67 Pa/h Remark: The Vacuum Heat treatment Furnace can be customized for your specific project. Several hotzone design for choose: Horizontal, Vertical; Vacuum Heat Treatment Furnace features: (1) Vacuum Heat Treatment Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Heat Treatment Furnace – High vacuum level, enable it can be used for a wide of industries; (3) Vacuum Heat Treatment Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten… (4) Vacuum Heat Treatment Furnace – Reasonable hotzone design enable a high temperature uniformity; (5) Vacuum Heat Treatment Furnace – Friendly control system.