Welded steel pipe refers to steel belt or steel plate bending deformation into a round, square and other shapes after welding, surface joints of the steel pipe. The welded steel pipe has lower cost and higher production efficiency than the seamless steel pipe, and the blank used is steel plate or strip steel. Welded steel pipe has strong corrosion resistance in acidic environment. Welded (ERW, LSAW, SSAW) steel line pipe: 1/2�?�¢?? to 60�?�¢?? Range of Thickness: SCH 10 to SCH 160 Ends Type: Beveled ends, Plain ends Range of length: 20FT, 40FT or customized Protection Caps in plastic or iron available Surface appearances: Natural, Varnished, Black painting, 3PE, FBE, etc
Galvanized steel pipe mainly used in transmission of coal gas, steam. It was used as water pipe, but after several years past, there were many rust in the pipe, and water get yellow color for carrying iron oxide. The water not only polluted dishes or other sanitary ware, but also carrying bacteria produced in the internal surface which not smooth . As a result of the corrosion, the water contains heavy metal element is too much and is harmful to peopleâ??s health. For this reason, developed countries gradually� banned it using as water pipe since 1960s. Material Standard: ASTM, ASME and API 5L PSL2; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Form: Round, Square, Rectangular Etc Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Steel Line Pipe API 5L supply scope: Standard: API SPEC 5L 2018. Grades: API 5L X52NS. Steel Pipe Dimensions: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless. Wall Thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160 Ends Type: Beveled ends, Plain ends Length Range: 20 FT (6 meter), 40FT (12 meter)or customized End Protection: plastic Caps or iron Caps. Surface: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc
Cold galvanized is electric galvanized, galvanized amount is very little, only 10-50g/m2, its own corrosion resistance is much different than hot galvanized steel pipe. Regular galvanized steel pipe manufacturers, in order to ensure quality, most do not use galvanized (cold plating). Only those small enterprises with obsolete equipment use electrogalvanizing, of course, their price is relatively cheaper. In the future, it is not allowed to use cold galvanized steel pipe as water and gas pipe. Material Standard: ASTM, ASME and API 5L PSL2; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Form: Round, Square, Rectangular Etc Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
The molten metal reacts with the iron matrix to produce an alloy layer, so that the matrix and the coating are combined. Hot dip galvanized steel pipe is first pickling, in order to remove iron oxide on the surface of the steel pipe, after pickling, through ammonium chloride or zinc chloride aqueous solution or ammonium chloride and zinc chloride mixed aqueous solution tank for cleaning, and then into the hot dip plating tank. Hot dip galvanizing steel pipe has the advantages of uniform coating, strong adhesion and long service life. Most of the processes in north China are zinc plating with direct coil pipe. Material Standard: ASTM, ASME and API 5L PSL2; Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Form: Round, Square, Rectangular Etc Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, textile and boiler manufacturing. Cold drawing, welding, extrusion and hot rolling are the methods of producing special-shaped tubes. Compared with the circular tube, the special-shaped tube generally has larger moment of inertia and section modulus, and has greater bending and torsion resistance, which can greatly reduce the weight of the structure and save steel.
Line pipe is a type of pipe that is manufactured from high strength carbon steel. It is typically made according to metallurgical specifications that were developed by the American Petroleum Institute (API). Line pipe can be used to build pipelines that transport a variety of resources including natural gas, oil, petroleum, and water. This pipe is available in a variety of diameters ranging from 2 inches to 48 inches. Line pipe can include either seamless or welded carbon steel or stainless steel piping. Because line pipe needs to withstand high pressures, there are important tests done on line pipe to ensure it meets all of the requirements of steel chemistry, strength, toughness, and dimensional characteristics. Using line pipe that meets the set criteria will ensure safe and reliable pipeline service. Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Seamless pipes are derived from solid steel that is in sheet or bar form and is formed into a solid round shape known as â??billetsâ?? which are then heated and cast over a form such as a piercing rod to create a hollow tube or shell. These kinds of pipes are known for their ability to withstand pressure more efficiently in comparison to other methods of pipe manufacturing processes, as well as being fast and cost-effective. Seamless pipes are generally used in gas lines, as well as pipes that carry liquids. Product name: Line line, Seamless steel pipe API 5L; Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Product name: Line pipe, Seamless steel pipe API 5L; Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
The square pipe is a hollow square section light thin-walled steel pipe. It is a section steel with a square cross-section shape and size made of Q235 hot-rolled or cold-rolled strip or coil as the base material, which is formed by cold bending and then welded by high-frequency welding. It has good comprehensive mechanical properties, weldability, cold and hot work ability and corrosion resistance, and has good low temperature toughness. Square pipe and rectangular pipe is equal and unequal length of the steel pipe. Is made of steel after the process of rolling. Generally the strip is unpacked, flattened, curled, welded to form a round pipe, and then rolled into a square pipe and then cut into the required length.
Carbon steel pipe fitting is one of the most widely used pipe fitting products. The main material is Q235,20#,35#,45#, 16Mn. The main products include carbon steel elbow, carbon steel flange, carbon steel tee, carbon steel reducing pipe (size head), carbon steel head (cap) and so on. The main implementation standards include national standard, American standard, Japanese standard, which also includes the Ministry of Chemical industry standards, Sinopec pipe fitting standards, power pipe fitting standards.
Carbon steel seamless pipe is a kind of long steel with hollow cross section and no joint around. It has a hollow cross section, a large number of used for conveying fluid pipelines, such as conveying oil, natural gas, gas, water and some solid materials pipelines. Compared with solid steel such as round steel, carbon steel seamless pipe has the same bending and torsional strength and is light in weight. It is an economic cross-section steel, widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipe, automobile drive shaft, bicycle frame and steel scaffolding used in construction, etc. Product name: Line line, Seamless steel pipe API 5L; Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Carbon seamless steel pipe is made by perforating ingot or solid tube billet and then hot rolling, cold rolling or cold drawing. Carbon seamless steel pipe occupies an important position in Chinese steel pipe industry. Carbon seamless steel pipes transport water, oil, gas or other chemical fluids. The performance of� seamless steel pipe� is very good, and it has a wide range of applications, and has good corrosion resistance, practicability is indeed guaranteed, and the service life is also very long. Moreover, many construction parties need to purchase steel pipes in large quantities. Material: GR.B,ST52, ST35, ST42, ST45,X42, X46, X52, X56, X60, X65, X70,SS304. Standard: API5L , ASTM A106 Gr.B, ASTM A53 Gr.B,ANSI A210-1996, ANSI B36.10M-2004 , ASTM A1020-2002,ASTM A179-1990 ,BS 3059-2,DIN 17175 ,DIN 1630 ,DIN 2448. Certificates: ISO 9001:2008, SGS,. Dimensional specification: ANSI/ASME B36.19M, ANSI/ASME B36.10M. Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless. . Length Range: 20 FT (6 meter), 40FT (12 meter)or customized. End Protection: plastic Caps or iron Caps. Surface Coatings: Natural, Black painting, 3PP, 3PE and FBE, Cladding and Lined etc. Shapes: Round, Rectangle. Schedule Thickness Range: SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS. Packaging: Loose package; Packaged in bundles(2Ton Max); bundled pipes with two slings at the both end for easy loading and discharging.
Steel Line Pipe API 5L supply scope: Standard: API SPEC 5L 2018. Grades: API 5L X52NS. Steel Pipe Dimensions: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless. Wall Thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160 Ends Type: Beveled ends, Plain ends Length Range: 20 FT (6 meter), 40FT (12 meter)or customized End Protection: plastic Caps or iron Caps. Surface: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc
1. Goods name: Black welded pipes, ERW steel pipe 2. Size: 1/2"24" (OD21.3mm-610mm) 3. Wall thickness: SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100 SCH120, SCH160, XS, XXS or as per your request 4. Spec: API 5L PSL1,PSL2/A,B,X42,X46,X52,X56,X60,X65,X70 API5CT /H40,J55,K55 ASTM A53 /A,B ASTM A135 /A,B ASTM A252 /1,2,3 ASTM A500 /A,B,C ASTM A795 / A,B EN10219 / S235JRH,S275J0H,S275J2H,S355J0H,S355J2H EN10217-1 / P195TR2,P235TR2,P265TR2,, EN 10255,EN 39 JIS G 3444 / STK 290,STK400,STK490,STK500,STK540 JIS G 3452, JIS G 3454 / STPG370,STPG410,JIS G 3475 JIS A 5525 /SKK400,SKK490, BS1387,AS 1074 AS/NZS 1163 / C250,C250 LO,C350,C350LO,C450, C450 LO SANS 62-1, SANS 719 / A,B,C,D GB/T 9711,GB/T 6728, GB/T 9711,GB/T 19830,CSA G40.21, 5. With Certificates API5L, CE, CNAS, DNV, KR, ABS, ISO 9001:2008, ISO 14001 6. Surface Treatment Black paint, varnish, oil, galvanized, 3PE, FBE, anti-corrosion coated. 7. Pipe Ends Under 2 inch plain end. 2 inch and above Beveled. Plastic caps (small OD). Iron protector (large OD). 8. Marking Standard marking, or according to your request. Marking Method: Spray white paint 9. Pipe Length: 5.8m , 6m or 12m 10. Loose package; Packaged in bundles(1.5Ton Max); bundled pipes with two slings at the both end for easy loading and discharging; wooden cases; waterproof woven bag. 11. Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection,hydraulic testing , X-ray Test. 12. Application liquid delivery,Structure pipe,construction, petroleum cracking,oil pipe,gas pipe 13.Our Advantages: 1) Reasonable price with excellent quality 2) Abundant stock and prompt delivery 3) Rich supply and 23 year manufacturing experience, sincere service 4) Reliable forwarder, 4-hours away from loading port.
Fast pipe connection and repair. Material: AISI304 AISI316L AISI316TI Sealing rubber: EPDM/NBR SIZE: DN25-600 Working pressure: 5-32bar Temperature: -30----+120 centigrade degree z
Fast pipe connection and repair. Material: AISI304 AISI316L AISI316TI Sealing rubber: EPDM/NBR SIZE: DN25-600 Working pressure: 5-32bar Temperature: -30----+120 centigrade degree Warranty: 20 years Certification: DNV, GL, CCS, ABS, BV, LR. Fire Proof Pipe Couplingsz
Structure steel, section steel, sheets, wire rod, like channel bar, angle bar, flat bar, coil.
Machining capacity 1.6m in diameter, total length 10m, and roll surface length 6m.
Product description Various rope fasteners, rope sockets, rope anchorages Material:astm 1045, 1035, 1030, 1020 Technology:casting+forging+stamping+machining Application:elevator industry Oem service for mideast, india, japan, korea, usa & europe etc. Supply various rope sockets / rope fasteners / rope anchorages to elevator industry for international market; Custom manufacturing various rope sockets / rope fasteners / rope anchorages etc elevator parts/lift parts as per customers' drawings, samples or specifications. Advantages to ours: Steady quality; Competitive price; On time delivery; Oem / odm service;
