Sintered Mullite is made of high-quality bauxite, by multistage homogenization and sintering above 1750 C. It has the characteristics of high density, stable quality, good thermal shock stability, small high temperature creep value and good chemical corrosion resistance. It is an ideal raw material for the production of various shaped and unshaped refractory materials, high-grade sanitary ware embryo, precision casting model and other refractory products. Index Type Chemical Composition % Al2O3 SiO2 Fe2O3 BDg/cm3 Water absorption% M60 58-62 32-36 1.5 2.7 2.0 M70 68-72 22-26 .5 2.8 1.5 M80 76-80 14-18 1.5 2.9 1.5 High quality Sintered Mullite is produced by our company's special process. Compared with ordinary mullite, it has the characteristics of low impurity, high mullite phase content, good thermal vibration stability and long service life. It is the ideal replacement product of ordinary mullite. It can be widely used in steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
The main ingredient of bauxite also known as alumina is aluminum oxide. It is an earthy mineral colored white or gray white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non ferrous metallurgy, electronics, petroleum,
Bauxite Based Sintered Magnesium Aluminum Spinel Bauxite based Sintered Magnesium Aluminum Spinel is made from high-quality bauxite and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1800 �?�° C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance. It is the ideal raw material for refractory products such as Magnesium Aluminum Spinel bricks, ladle lining bricks, ladle castables which are used for cement rotary kiln, lime kiln and other high temperature used place.
Sintered Mullite Sintered Mullite is made of high-quality bauxite, by multistage homogenization and sintering above 1750 C. It has the characteristics of high density, stable quality, good thermal shock stability, small high temperature creep value and good chemical corrosion resistance. It is an ideal raw material for the production of various shaped and unshaped refractory materials, high-grade sanitary ware embryo, precision casting model and other refractory products. Index Type Chemical Composition % Al2O3 SiO2 Fe2O3 BDg/cm3 Water absorption% M60 58-62 32-36 1.5 2.7 2.0 M70 68-72 22-26 .5 2.8 1.5 M80 76-80 14-18 1.5 2.9 1.5 High quality Sintered Mullite is produced by our company's special process. Compared with ordinary mullite, it has the characteristics of low impurity, high mullite phase content, good thermal vibration stability and long service life. It is the ideal replacement product of ordinary mullite. It can be widely used in steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
Sintered Mullite Sintered Mullite is made of high-quality bauxite, by multistage homogenization and sintering above 1750 C. It has the characteristics of high density, stable quality, good thermal shock stability, small high temperature creep value and good chemical corrosion resistance. It is an ideal raw material for the production of various shaped and unshaped refractory materials, high-grade sanitary ware embryo, precision casting model and other refractory products. Index Type Chemical Composition % Al2O3 SiO2 Fe2O3 BDg/cm3 Water absorption% M60 58-62 32-36 1.5 2.7 2.0 M70 68-72 22-26 .5 2.8 1.5 M80 76-80 14-18 1.5 2.9 1.5 High quality Sintered Mullite is produced by our company's special process. Compared with ordinary mullite, it has the characteristics of low impurity, high mullite phase content, good thermal vibration stability and long service life. It is the ideal replacement product of ordinary mullite. It can be widely used in steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
The main ingredient of bauxite also known as alumina is aluminum oxide. It is an earthy mineral colored white or gray white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non ferrous metallurgy, electronics, petroleum,
The main ingredient of bauxite also known as alumina is aluminum oxide. It is an earthy mineral colored white or gray white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non ferrous metallurgy, electronics, petroleum, chemical industry ,astronavigation , atomic energy, national defense and other industries. The calcined bauxite is added into the  high temperature electric arc furnace which is about 2000 2200 and then process by high temperature melting, high pressure and high speed air or steam injection, cooling and then it become into Silicate Aluminum Refractory  Fiber which is white as cotton.It can be pressed into fiber blanket, fiber board or woven into cloth to instead of high temperature industrial furnace lining brick of smelting, chemical , glass industry and other industry . Firefighters can use refractory fiber cloth to make clothes. Manufacture alumina cement, abrasive materials, ceramic industry and other aluminum compounds in chemical industry which for alumina produce. Calcined Bauxite performance and specification Item specification Al2O3 SiO2 Fe2O3 TiO2 CaO MgO Na2O K2O Bulk Density 88 88 7 2 4 0.6 0.4 3.25gcm3 87 87 8 2 4 0.6 0.4 3.20gcm3 86 86 9 2 4 0.6 0.4 3.15gcm3 85 85 10 2 4 0.6 0.4 3.10gcm3
Bauxite based Sintered Magnesium Aluminum Spinel is made from high-quality bauxite and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1800 �° C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance. It is the ideal raw material for refractory products such as Magnesium Aluminum Spinel bricks, ladle lining bricks, ladle castables which are used for cement rotary kiln, lime kiln and other high temperature used place.
Sintered Mullite is made of high-quality bauxite, by multistage homogenization and sintering above 1750 C. It has the characteristics of high density, stable quality, good thermal shock stability, small high temperature creep value and good chemical corrosion resistance. It is an ideal raw material for the production of various shaped and unshaped refractory materials, high-grade sanitary ware embryo, precision casting model and other refractory products. Index Type Chemical Composition % Al2O3 SiO2 Fe2O3 BDg/cm3 Water absorption% M60 58-62 32-36 1.5 2.7 2.0 M70 68-72 22-26 .5 2.8 1.5 M80 76-80 14-18 1.5 2.9 1.5 High quality Sintered Mullite is produced by our company's special process. Compared with ordinary mullite, it has the characteristics of low impurity, high mullite phase content, good thermal vibration stability and long service life. It is the ideal replacement product of ordinary mullite. It can be widely used in steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
The main ingredient of bauxite also known as alumina is aluminum oxide. It is an earthy mineral colored white or gray white and could also appear to be brown yellow or light red due to iron inside it . Calcined Bauxite is produced by high temperature calcination. Product usage (1) Aluminum Industry. Used for national defense, aviation, automotive, electric appliance, chemical industry, daily necessities, etc (2) Precision Casting.Calcined bauxite powder can be used for produce mold precision casting and used for military industry, aviation, communication, instrument, machinery and medical equipment department. (3)Used for Refractory Product .The refractoriness of calcined bauxite could be as high as 1780 .And it also has excellent chemical stability and good physical properties. (4)Silicate Aluminum Refractory Fiber. With advantages such as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small heat capacity and mechanical shock resistance .It can be used for steel, non-ferrous metallurgy, electronics, petroleum, chemical industry ,astronavigation , atomic energy, national defense and other industries. The calcined bauxite is added into the high temperature electric arc furnace which is about 2000 ~ 2200 and then process by high temperature melting, high pressure and high speed air or steam injection, cooling and then it become into Silicate Aluminum Refractory Fiber which is white as cotton.It can be pressed into fiber blanket, fiber board or woven into cloth to instead of high temperature industrial furnace lining brick of smelting, chemical , glass industry and other industry . Firefighters can use refractory fiber cloth to make clothes.¸Manufacture alumina cement, abrasive materials, ceramic industry and other aluminum compounds in chemical industry which for alumina produce.
Calcined bauxite has traditionally been the most commonly used aggregate material used for High Friction Surfacing.The inherent nature of Calcined Bauxite resists shear stresses that lead to polishing of the road surface. Its hardness is also beneficial in internal and external industrial flooring applications where a very hard and long lasting mineral is required to give high-friction, anti-slip performance.Calcined Bauxite has been found to exhibit characteristics far superior to alternative road surface aggregates.
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85oc to 1600c) .This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57%to 58%in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .this removes moisture there by increasing the alumina content. compared to an alumina content of about 57%to 58%in raw bauxite, calcined bauxite has an alumina content of 84%to88%.the heating is carried out in rotary kilns.
model Al2O3 Fe2O3 TiO2 Bulk densit g per cm3 bauxite clinker 80 90 1 point 2 2 point 5 2 point 5 3 point 8 3 point 0 till 3 point 3 Calcined bauxite bulk density through artificial selection processing and crushing magnetic separation procedures Bauxite aggregate also called refractory aggregate high grade called high alumina aggregate content is generally 55percent till 88percent High alumina refractory castable aggregate is indispensable raw materials And alumina cement fine powder mixed with water in proportion to generate very high strength refractory concrete I produced the high alumina aggregate is the choice of high grade aluminum cortical stone the rotary kiln calcination Having dense large easy construction etc to solve the current high aluminum aggregate materials commonly used body loose powder produced concrete porosity low refractoriness shortcomings of similar products in the boutique High alumina refractory aggregate refractory concrete casting and other fields is widely used
1, aluminium industry.Used for defense, aerospace, automotive, electrical, chemical industry, daily necessities, etc. 2, the precision casting.Alumina clinker made after mold precision casting processed into fine powder.Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department. 3, used for refractory products.High bauxite clinker as high as 1780 refractoriness, chemical stability strong, and good physical properties. 4, aluminum silicate refractory fiber.With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock.Used in iron and steel, nonferrous metallurgy, oil, chemical space of atomic energy, defense and other industries. 5, magnesia and bauxite clinker as raw material, adding proper binder, used for pouring ladle whole ladle lining has particularly good effects. 6, manufacture alumina cement, abrasive materials, ceramic industry and the various compounds can be aluminum.
Bauxite is one such sedimentary rock which is widely used for the manufacturing of aluminium by various industries such as the chemical industry, refractory, abrasive, cement, steel, and petrol industry amongst others. In chemical, bauxite along with alumina is used in the manufacturing of aluminium chemicals. In refractory, it is used as a raw material for making several products. Al2O3--92.06; Fe2O3--1.14; TiO2--3.86; SiO2--2.04; K2O---0.16; Na2O---0.022 CaO---0.074; MgO--0.055; AP--5.02; BD----3.68g/cm3
Bauxite is one such sedimentary rock which is widely used for the manufacturing of aluminium by various industries such as the chemical industry, refractory, abrasive, cement, steel, and petrol industry amongst others. In chemical, bauxite along with alumina is used in the manufacturing of aluminium chemicals. In refractory, it is used as a raw material for making several products.
Rotary kiln calcined bauxite is obtained by calcining superior grade bauxite at high temperatures (from 850 to 1600) in the rotary kiln. This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57% to 58% in raw bauxite, calcined bauxite has an alumina content of 84% to 88%. Besides, through calcination, the density and refractory resistance will also be improved to varying degrees. The grade of bauxite can be increased greatly.
As we all know, China is the world's leading supplier of bauxite, producing over three million tons per year for refractory, abrasive, and welding applications. Calcined bauxite is made of excellent bauxite ores, fired in a kiln to impart its superior abrasive qualities, hardness, and long-term frictional resistance. This materials are in stable index, homogeneous structure and excellent high-temperature performance. Its high alumina and low iron make calcined bauxite be the ideal raw material in refractory and abrasive products.
Welding grade bauxite Welding grade bauxite has tight regulation on presence of sulfur and phosphorus which are detrimental to the weld. When present at high concentrations, they induce porosity and cracking, and at lower concentrations, they adversely affect the impact strength of the weld. And moisture for welding grade bauxite should not exceed 0.5% because the potential for any moisture present withthin the flux to reduce to hydrogent, if exposed to a welding arc, the molten weld pool absorbs the hydrogen and will induce brittleness into the weld. Application Welding fluxes are a small but valuable market for calcined bauxite. Techniques for submerged arc welding require the use of a granular flux to shield the molten weld pool rom the atmosphere during the weldâ??s application or pacement. Various proprietary compositions exist and in some cases calcined bauxite is incorportated into these formulations. Calcined bauxite may, in some instances, make up to 25% of the welding flux. Specification for snw83 calcined bauxite Chemical analysis Al2o3: min 83% Fe2o3: max 2.0% Sio2: max 9.0% K2o: max 0.3% S: max 0.02% P: max 0.05% Available grain size 250mesh; 325mesh; 600mesh; 800mesh; 1000mesh; 2500mesh; or as customer's requirement. Package 1mt jumbo bag Standard exporting package for sea transportation or air delivery Special packing requirement is acceptable.
