1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
Basic Parameters Dimensions: 201 x 99 x 35 mm Weight: 333g Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A Display mode Segment LCD with white backlight + LED in red and green Function Introduction Charge Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3. Tester will stop charging if one of the conditions below was met. 1) Remaining capacity 99% & current intensity = 0 2) Remaining capacity = full charge capacity 3) Current intensity reduce to end charge current when constant voltage charge 4) Remaining capacity reach up the set value Discharge Constant current discharge for double loads Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered Tester will stop discharging if one of the conditions below is met. 1) Remaining capacity set value 2) Voltage set value 3) Current intensity reduce to zero Remarks: Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value. Test Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result. Normal: Test OK Shown on LCD Abnormal: Test NG Shown on LCD Possible causes and solutions for the abnormal: 1) Cause: battery voltage is too low to discharge Solution: try to charge the battery to raise voltage 2) Cause: remaining capacity is too full to charge any more Solution: try to discharge the battery to reduce the remaining capacity 3) Bad contact of battery connecting wires 4) Damaged battery 5) Tester trouble Capacity Correction The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip. Remarks: Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again. 50% Capacity CD50%: charge firstly, and then discharge to 50% capacity DC50%: discharge firstly, and then charge to 50% capacity Online Functions Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine. Monitoring Battery information can be monitored via three windows. 1. Home screen Battery bar and brief information can be read on home screen. 2. Battery detail information window Show smart battery data in real time and the data can be saved and printed in image format. 3. Battery graph window Voltage, current and capacity are traced in curves. Control Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands. Attention All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester. Others 1. Active cooling 2. Active batteries of zero voltage When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery. 3. Battery identification Battery information can be read from battery management chip after establishing communication. 4. Intelligent protection Against over-current, over-voltage, over-charge, over-heat and short circuit. 5. Fan Discharging mode: fan startup Other modes: fan startup when temperature above 48 Fan stop working when temperature below 40 6. Trouble alarm LED flickers in red color and current command stops when one of the conditions below happen. 1). There is not current for around 50 seconds when charge. 2). There is not current for around 25 seconds when discharge. 3). Charging time is above 8.8 hours. 4). Discharging time is above 9.9 hours. 5). Suitable for almost all laptop batteries, above 95% Structure Accessories 1).1 * adapter 2). 1 * USB cord 3). 1 * CD 4). 13 * connectors 5). 10 * cables 6). 10 * jumpers 7). 1 * loader Standard Export Carton
Solar batteries, vrla,opzs, opzv,lifepo4, lithium ion battery.
Battery Like Automotive Batteries..
Lithium battery, battery pack, solar storage battery, rechargeable batteries, vacuum battery, camera battery, lithium ion battery, lifepo4 battery, li polymer battery.
Maintenance Free Sealed Lead acid battery 12V7Ah Features: - Designed floating charging service life: 8 years 25C - Sealed and maintenance free operation - Safety valve installation for explosion proof - Low self-discharge characteristic - Wide operating temperature range from 0C~40C - Lead calcium Aluminum tin alloy high energy, prevent corrosion. Application: - Measuring equipment and instrument - Telephone sets - Lighting equipment - Security systems - UPS power supply 12V7Ah: L152*W65*H96*T.H.102MM 12V12Ah: L151*W99*H95*T.H.101MM 12V18Ah: L180*W75.5*H168MM 12V24Ah:L165*W126*H175*T.H.183MM 12V28Ah: L166*W175*H125*T.H.125MM UL CE approval, ISO9001, ISO14001 management 1 years warranty
Rated capacity: 215kWh / 241kWh Rated voltage: 768V Rated battery capacity: 280Ah / 314Ah Battery type: Lithium iron phosphate Cooling method: Air - cooling Dimensions: 1275 * 1000 * 2471mm Weight: Approximately 2.2 tons specifications can be customized
Maintenance Free Sealed Lead Acid AGM Deep Cycle Battery Features - High performance, completely maintenance-free, low self-discharge. - 100% precise quality testing, stable quality and high reliable performance - Unique grid alloy formula and updated manufacturing technique - Thick plates and high-density active material - Excellent recovery from deep discharge - Wide operating temperature range from -10C~40C - Floating & Standby use: up to 8 years - Cycle use 1: 350-400 cycles at DOD 80% - Cycle use 2: 500-600 cycles at DOD 50% - Cycle use 3: 800-1200 cycles at DOD 20% Application: UPS Power Supply, Telecom Equipment, Power Station, Solar/Wind energy storage system Specifications Model Nominal Voltage Capacity Dimension(mm/Kg[(5%)]) Terminal (V) (Ah) Length width Height Total Height Weight 12V31Ah 12 31 195 130 155 180 10.2 T7/T9 12V33Ah 12 33 195 130 155 180 10.5 T7/T9 12V38Ah 12 38 195 130 155 180 12.5 T7/T9 12V40Ah 12 40 197 165 170 170 13.3 T4/T9 12V42Ah 12 42 197 165 170 170 14.1 T4/T9 12V45Ah 12 45 197 165 170 170 14.5 T4/T9 12V50Ah 12 50 229 138 208 230 16.5 T5/T9 12V55Ah 12 55 229 138 208 230 17.5 T5/T9 12V60Ah 12 60 260 168 211 233 20 T5/T9 12V70Ah 12 70 260 168 211 233 22.3 T5/T9 12V75Ah 12 75 260 168 211 233 23.2 T5/T9 12V65Ah 12 65 350 167 179 186 21.2 T5/T9 12V80Ah 12 80 350 167 179 186 23.5 T5/T9 12V90Ah 12 90 306 169 211 233 27 T5/T9 12V100Ah 12 100 331 173 213 233 30.5 T5/T9 12V110Ah 12 110 331 173 213 233 32.5 T5/T9 12V120Ah 12 120 409 176 225 225 35 T5/T11 12V134Ah 12 134 342 172 280 285 42.5 T11 12V150Ah 12 150 485 172 240 242 44.5 T5/T11 12V200Ah 12 200 522 238 218 238 61 T5/T11 12V225Ah 12 225 522 238 218 238 64 T5/T11 12V230Ah 12 230 529 268 220 241 61.5 T12 12V250Ah 12 250 529 268 220 241 64.5 T12
Battery Type: lithium polymer battery Capacity: 118.4Wh Peak Current: 3200A Start 12V Engines: all petrol/all Diesel DC Output: 12V-16.8V/10AÃ??1 USB-A Output: QC18WÃ??1 Type-C Output: PD100WÃ??1 Type-C Input: PD65WÃ??1 Fully Charge Time: 2.4 hour Power Indicator: LED Display Panel LED Lighting: Flashlight, Strobe, SOS Size: 225*90*45mm Weight: 1kg Cycle Life: 1000 times
Battery Type: lithium polymer battery Capacity: 74Wh Peak Current: 2000A Start 12V Engines: all petrol/8.0L Diesel DC Output: 12V-16.8V/10AÃ??1 USB-A Output: QC18WÃ??1 Type-C Output: PD100WÃ??1 Type-C Input: PD65WÃ??1 Fully Charge Time: 1.5 hour Power Indicator: LED Display Panel LED Lighting: Flashlight, Strobe, SOS Size: 190*90*45mm Weight: 0.8kg Cycle Life: 1000 times
Battery Type: lithium polymer battery Capacity: 44.4Wh Peak Current: 1200A Start 12V Engines: 6.0L petrol/4.0L Diesel DC Output: 12V-16.8V/10AÃ??1 USB-A Output: QC18WÃ??1 Type-C Output: PD100WÃ??1 Type-C Input: PD65WÃ??1 Fully Charge Time: 1 hour Power Indicator: LED Display Panel LED Lighting: Flashlight, Strobe, SOS Size: 190*90*45mm Weight: 0.5kg Cycle Life: 1000 times
[Specifications] Input: AC100V-240V 50/60Hz. Output: DC12V~2A (1.5A,1A,800mA, 500mA,400mA,200mA,100mA all compatible, can adjust output current depends on your devices input) Max power: 24W (20W/18W/15W/10W/8W/5W all compatible) DC plug size: 5.5mm x 2.1mm Polarity: inner positive+/outer negative- (same as most DC12V devices). [Safety & Durability] Over voltage/ over current/ short circuit/over loaded/surge protection system loaded, robust design with fireproof shell and superior heat dissipation board, without fan noise, CE/FCC/DoE VI certified safety insurance and energy efficient. [Compatibility] Except for the common 5.5 x 2.1mm DC plug, this power supply also be customized with other plug tips, support almost all small DC12V devices such as LED Strip Lights, WIFI Router, ADSL Cats, Bluetooth speaker, GPS, webcam, digital piano keyboards, Switches, CCTV Security Cameras and other devices which are powered by DC12V (2A,1.5A,1A,800mA,500mA,400mA,200mA,100mA) power supply.
Acceptable Customization
Various kinds of on board chargers (OBD), excellent quality, competitive price, in time delivery, please contact for details.
Various kinds of on board chargers (OBD), excellent quality, competitive price, in time delivery, please contact for details.
Suitable for solar systems, RVs, electric cars, boats and more. 12V, 24V, 36V, 48V series AAA grade battery, >6000 cycles Sufficient stock If you are interested, please send your inquiry to my facebook inbox, I will be happy to receive your inquiry.
he built-in MPPT can be charged with a Folding solar pane. The in-vehicle outlet can be charged. power station has one Pure Sine Wave AC outlets, It can power your full full-size refrigerator, TV, mini cooler, electric grill, fan, laptop, mobile phones and more for your outdoor and home needs.
The battery pack uses a square cell, the lithium battery has the advantages of high energy density, long cycle life, small self-discharge rate, non-memory effect, and green environmental protection, and has broad application prospects in the field of electricity energy storage, the overall structure is mounted Structure, easy to install
Waveform: sine wave Battery pack: 577Wh, 156000mAh (4S15P60 only 2600) Rated power: 600W peak 1000W Battery Type: High Quality Lithium-Ion Battery (Universal Lithium Charges 600 Times, No Memory, About 85% Storage Capacity After 600 Charges) Replaceable LIFE PO4 iron-lithium battery 3.2V 4S7P 32.2Ah (iron-lithium 412WH) rated power: 600W AC: AC 110V-220V 60/50Hz DC: Adapter 22V/5A (110W), fully charged in about 6.5 hours Solar: Anderson Interface 120W MAX (5A 18-24V) 1TPYE-C::20V/3A 60WMAX (double-pass), with DC charging can be fully charged in about 4 hours The output is pressed by, AC output: 220V 50Hz/110V 60Hz/50hz (three US/Japanese standards, two national standard outputs) Four DC outputs DC:13.2V/10A(MAX)132W 3 USB-QC3.0: 5V/3A, 9V/2A, 12V/1.5A 18W MAX1TPYE-C: 20V/3A) (double pass) Car charger output: 13.2V/5-10A MAX Lighting: 4W LED (long light mode/brightest mode/SOS mode/strobe mode) Certificate: ROHS, TCT211104C013C Charging temperature: 0~40 (32~104F) Discharge temperature: -10~60 (14~140F) Storage temperature: -20~45 (-4~113) Use cycle:500 times Safety protection: multiple protections (short circuit protection, over temperature protection, over current protection, over discharge protection, over voltage protection, overload protection, low voltage protection, etc.) Product size: 286X150X158MM Outer box size: one pack: length 348 width 235 height 315mm Outer box size two packs: length 498 width 360 height 340mm Net weight: 6.6KG Gross weight: 8.4KG (including outer box) Color: black, silver (customization) Input conversion: 90% Output conversion: the effective conversion rate of the inverter is 92%
