TITANIUM PLATE TITANIUM BAR TITANIUM PIPE FLANGE FORGING
Titanium plates Commercially pure, alloy, and eli grade titanium plate and sheet *commercially pure titanium plate Available up to 3000mm wide x 6000mm long or cut to size Thickness from 5mm to 80mm *titanium alloy plate and 6al-4v eli plate Available up to 1800mm wide x 3000mm long or cut to size Thickness from 5mm to 80mm *commercially pure titanium sheet and alloy sheet Available up to 1000mm wide x 2000mm long or cut to size Thickness from 0.5mm to 5mm standard:astm b265 mil-t-9046j ams 4911h ams 4914 dms 1592f din 3.7*** gb/t 3620.1-94 gb 3620.2-94 Seaworthy wooden case
Titanium sheet, titanium plate, titanium sheet and plate for industry Purity: 99.5% Shape: flat sheet Certification: ISO 9001:2000 Standard: ASTM B265, ASME B348, ASTM F136, ASTMB381, AMS4911, ASTMF67 and so on. Technique: cold rolled, hot rolled, annealed Size: Thickness mm Width mm Length mm >4.75 60 400 3000 1000 4000 0.3 6 400 1000 1000 3000 >4 10 400 3000 1000 4000 1.0 4.0 400 1000 1000 3000 0.3 4.75 400 1000 1000 3000 Grade: Gr1.Gr2.Gr3.Gr4.Gr5.Gr7.Gr9, Gr11, Gr12, Gr23, Ti15333, Ti-6Al-4V, Ti-6Al-4V ELI Standard: ASTM B265, ASME B348, ASTM F136, ASTM B381, AMS 4911, ASTM F67 Application: Industry ,Medical ,Chemical ,Aerospace, Standard part, Frame, Car beauty Properties: Low density, Resistance to corrosion and erosion-corrosion, Very thin, conductive oxide surface film, Smooth surface that limits adhesion of foreign materials, Surface promotes drop-wise condensation. 10pc/wooden case 1pc/pvc.
We can offer titanium plate with GR1, GR2, GR5, GR7, GR9 and if you have any nees, you can let me know.
Hot rolling, cold rolling. 1000*2000.
Titanium and titanium alloy plate Specification: ASTM B265, ASTM F67, ASTM F136, AMS & MIL Grade: Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr9, Gr10, Gr11, Gr12 Condition: R & M Dimension (mm): Thickness (0.4-0.7) * Width 700 * Length 2100 Thickness (0.8-4.0) * Width 1200 * Length 3500 Thickness (5.0-50) * Width 1500 * Length 4000 Thickness (60-120) * Width 1500 * Length 3000.
Material : TA2,TA3,Gr2,Gr3 Use: Medical Size: 0.5*(300-500)*(1000-2000)mm Tolerance: +/-0.03 Woodencase or as customer's requirement.
C.P.Ti,Ti-6Al-4V, Ti-6Al-4V ELI.Ti-6242,Ti-15333,Ti-3Al-2.5V,Ti-0.2Pd,Ti-38644 and Ti-0.3Mo-0.8Ni etc. according to ASTM, AMS,ASME,MIL,DMS,JIS specification respectively. Thickness(mm) Width(mm) Length(mm) Deliver Condition 0.6-
Titanium plate
Titanium plate
ASTM B265,AMS 4911 PLYWOOD CASES
High pure Gr1 Gr2 Gr3 Gr5 Gr9 Gr12 titanium plate/sheet 1. Titanium is a kind of rare nonferrous metal. Its density is 4.5g/cm3, it is just 60% of steel. So,it is very lighter than most other metals. We can use it to make high strength, good rigidity and light quality products. 2. It is also well-known as its high strength. It is able to work in the heat of 450-500 continuously. 3. Excellent corrosion resistance:it can work in the wet air,sea water,strong acid and strong alkali. 4. Non magnetic nature:as it is a sort of Non magnetic metal, it cannot be magnetized easily. And its nontoxic nature,a very good compatibility with human tissue and blood. So,it is widely adopted in the field of Medical Science. Titanium plate: 1. Product name: Titanium Sheet 2. Material: GR1, GR2, GR3, GR4, GR5, GR7, GR9, GR12-GR29, Ti11Cr-13v-3Al 3. Standard:ASTM B265,AMS4902,AMS4911,MIL-T-9047G,MIL-T-9046J 4. Specification:T:0.025-80mm W:200-2800mm L:10-4500mm 5. Brand: EnergyTi 6. Origin:Baoji, Shaanxi, China 7. MOQ:10kilogram Quality Control: Our products will be 100% checked and inspected by our QC before packing and shipment. ISO 9001:2018 certificate Quality Inspection: 1. Chemical analysis and Physical Properties test conducted by Bao Ti Group Test center 2. 100% ultrasonic test(UT) 3. Inspect if the surface of the material is contaminated. Features: 1. low density 2. good corrosion resistance property , rustless. 3. non magnetic nature 4. superior quality 5. fast delivery 6. reasonable price Application: Chemical industry, Petrochemical Industry, electrical power industry, military industry, health care industry,Ocean environmental protection, motor vehicle industry, bicycle industry, corrosive environment etc.
Sheet :Thickness:0.6-10mm Max Length:1000mm Max width:340mm Pipe : OD10-150MM* wall thickness 2-5MM Materials : titanium GR1 GR2 Feature: 1.Working Temperature:-200-1000°C 2.Corrosion Resistance 3.High Filtering Efficiency 4.Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc 5.Easy to welding and long working life Filter Shape: Could be cartridge filters,disc filters ,cup filters,cap filters,filter palte and etc Application: separation and purification of solid-liquid, gas-liquid and gas-solid in the petrifaction, hydraulic manufacturing and medical apparatus and instruments of basic industries. Technique parameters titanium powder sintering filter element technique parameters using temperatur:â?¤300°C filtering level filtration precision um maximum diameter um permeability coefficient 10-12m2 permeability m3/h.m2.kpa thickness mm compression strength Mpa/cm3 T9 0.2 2.5 1.5 0.6-10 3 T8 0.5 4 3 0.6-10 3 T7 1 6 5 0.6-10 3 T6 2 10 15 0.6-10 3 T5 5 15 0.04 40 0.6-10 2.5 T4 10 30 0.15 120 0.6-10 2.5 T3 20 60 1.01 250 0.6-10 2.5 T2 30 100 2.01 500 0.6-20 2.5 T1 50 160 3.02 800 0.6-20 2.5 The product performance can achieve and even exceed GB. The internal pressure of powder rolled and roll tube welding is more than 0.3Mpa
Mainly used in separation and filtration petrochemicals, liquid drug manufacturing, medical equipment, and other fields. Material: titanium Specifications:max.Width 340mm, max.Length 1000mm, max.Thickness 3.0mm Precision:0.2 to 65um
Quick details Place of origin: Shaanxi, china (mainland) Application: Industry, industry Thickness: 0.5~80 Width: 1000~2000, 1000~2000 Length: 2000~6000, 2000~6000 Technique: Cold rolled Grade: Gr1 Ti (min): 99.6% Brand name: Oy Model number: Titanium plate for electrolysis Name: Titanium plate Moq: 1kg Certification: Ce, iso9001, sgs Surface: Polished Material: Titanium
Titanium tube plate is mainly used in chemical industry.
Name Titanium Sheet / Titanium Plate Standard ASTM, AMS, ISO, GB/T Grade Commercially Pure and Alloys Dimension Cold Rolled: THK 0.5~5.0 Hot Rolled: THK 5.0~60 Condition Annealed Surface Polished or Pickled Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.3% molybdenum and 0.8% nickel. This offers enhanced corrosion resistance. Moderate Strength Titanium Excellent Cold Formability Excellent Weldability Excellent Resistance to High Oxidation Titanium Alloy Grade 12 has outstanding corrosion resistance and a combination of high strength and low density, with good ductility. Small additions of nickel and molybdenum have been made to this alloy resulting increase in corrosion resistance and high strength. It is particularly suitable for use in mildly reducing conditions, or where conditions vary from oxidising to reducing. 1). Processing method: cold-rolled, hot-rolled 2). Surface bright, polished, pickling, sand-blasted... 3). Standard: ASTM B265, ASME SB265... 4). Thickness:0.02~60mm 5). Width:50~3000mm 6). Length:1000~6000mm
Product Introduction The sintered corrugated plate is a corrugated plate made by the powder metallurgy process. It is usually made of metal or alloy powder through mixing, pressing, sintering, and other processes, and has excellent properties such as high strength, corrosion resistance, and high-temperature resistance. The manufacturing process of powder-sintered corrugated board is relatively simple, and can be customized according to specific needs, with high material utilization and production efficiency. At the same time, its corrugated shape can increase its surface area and channel length, improving its filtration and separation efficiency. In the fields of chemical industry and petroleum, the powder-sintered corrugated plate has become a kind of necessary filtration and separation equipment. In applying titanium sintered corrugated plate and ordinary titanium sintered plate in the electrolytic cell, titanium sintered corrugated plate has some advantages over ordinary titanium sintered plate. First, the corrugated shape of the titanium sintered corrugated plate can increase its surface area and channel length, which helps to improve the efficiency and yield of the electrolysis reaction. Secondly, the titanium sintered corrugated plate can improve the fluidity and mixing of the electrolytic cell, which is beneficial to the electrolyte�´s uniform distribution and the reaction product�´s rapid discharge. The corrugated structure on the surface of the titanium sintered corrugated plate can indeed increase the electrode surface area, increase the current transfer efficiency, and thus improve the electrolysis efficiency. In addition, it can also increase the mechanical strength and stability of the electrode, reduce the electrode�´s deformation and damage, prolong the electrode�´s service life, and reduce the maintenance cost. Therefore, the corrugated structure on the surface of titanium sintered corrugated plate has important application value in electrochemistry, but it does not directly affect the conductivity in the electrolyte solution. Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer´s designated place without damage.
Product Introduction Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries. Parameters Material: Titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm Dia: 1MM above Features 1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry. 2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries. 3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics. 4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis. 5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
