WHITE FUSED ALUMINA#240#600#1200#3000#6000 Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES: JIS STANDARD:#8 #10 #12 #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 FEPA STANDARD:F8 F10 F12 F14 F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000
White aluminum oxide F2000F1000F800F360F230 Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES:
white fused alumina corundum,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Feature High purity, good self-sharpening, acid and alkali corrosion resistance, high temperature resistance, stable thermal performance. Its hardness is slightly higher than brown corundum, toughness is slightly lower, grinding ability is strong, calorific value is small, and efficiency is high. Abrasive tools made from it are suitable for grinding fine-grained abrasives such as high carbon steel, high-speed steel and stainless steel. They can also be used for precision casting and advanced refractory materials. Partical model F8#, F10#, F12#, F14#, F16#, F20#, F22#, F24#, F30#, F36#, F40#, F46#, F54#,F60#, F70#, F80#, F90#, F100#, F120#, F150#, F180#, F220#
china manufacture white fused alumina oxide WFA WA White Fused Alumina,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Product Name china manufacture white fused alumina oxide WFA WA size 0-1mm 1-3mm 3-5mm 5-8mm -100mesh -200mesh -320mesh Color white Raw Material Aluminum Oxide Al2O3 99% Na2O 0.15-0.35% Fe2O3 0.02-0.08% Mohs Hardness 9.0 Specific Gravity 3.95g/cm3 Bulk Density 1.75-1.95g/cm3
Product Details Product description Green SiC Silicon Carbide is produced basically the same as the black silicon carbide, but different requirements for raw materials. It is smelted in the high temperature resistance furnace. The crystal is of high purity and strong hardness. our advantage Green silicon carbide has SIC content 99.1% min & sufficient acid-washing & accurate classification The certification of ISO9001:2008 Equipped full line of test method. The laboratory is certified by government Inspection Bureau, that assures its quality stability. All products will be supplied according to customers different requirement. Brilliant produce&supply&delivery ability Flexible price policy
Blasting media 14# 16# White korund grain White korund grain was made from the high quality alumina by melting above 2000 °C in the electric arc furnace and cooling. White korund oxide is white with the main crystal phase alpha-Al2O3.The White korund produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Product Name White korund Material AL2O3 Al2O3 99.2% Fe2O3 0.04% Na2O 0.26% SIO2 0.02% Bulk density 3.60g/cm3 Mohs Hardness 9.0 Quality Control
Reasonable price manufacturer garnet 80mesh Garnet 80 mesh is a non-metallic naturally obtainable mineral abrasive belonging to the silicate family. As almandine garnet, it is the heaviest and hardest of garnets. Duo to suitable hardness, physical properties,it's used widely for water jet cutting, sand blasting, water filtration. With its crystalline shape giving a fast cutting action and longer life span, garnet is a kind of ideal, environment-friendly and efficient natural abrasive.
Factory Direct of White fused corundum for sandblasting polishing White fused corundum is made by Aluminium Oxide powder which is electrically fused at high temperature. Our WA has the features of stable quality, well-distributed particle size composition, low magnetic substance content, high bulk density and hardness, good toughness, and high cleanliness, etc. It has been exported to more than 20 countries in Europe, America, Southeast Asia, etc.
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Application: Industrial Ceramic,Structure Ceramic,Wear resistant,Precision dimensions, strict tolerances,high hardness, excellent wear and heat resistance enable ceramic to be widely used in equipment and machinery industry. Gradually,ceramic shows a trend of replacing traditional and metal parts in special appilications. In addition to produce commody used ceramic parts in equipment and machinery industry,we cna also develop customized formula to produce ceramic parts that meet customers' special needs. Type: Silicon Carbide Ceramic wafers, Ceramic components. Materialï¼? Silicon Carbide. Available Color: Black. Feature: High Temperature Resistance,Insulation Performance,High Wear-resistance,High temperature-resistance. Usage: Semiconductor Industry. Size: Size Customized,according to customer's drawing,according your drawing,OEM. Shape: Round. Raw material: Germany,China,Japan,al2O3 Itemï¼? Engineering ceramic parts,Industrial Silicon Carbide ceramics. Advantageï¼? Long Service Life,10 more Years Structural Ceramics Experience,Super Wear Resistant,Fast Delivery Date. Package: Carton+Palletize,Carton,bubble paper inside,Wooden Box Nameï¼? CNC machining ceramics Silicon Carbide Ceramic Wafers. Toleranceï¼? ±0.002mm,can be polished,as customer's drawing,as design drawing or OEM Processingï¼? Pressureless-Sintering. Surface: Polishing Finish,Smooth or Glazed will be applied.
White fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It has higher hardness and slight lower toughness comparing with brown fused alumina. It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency. Comparing with brown fused alumina, white aluminum oxide is also characterized by its high purity, acid and alkali resistance, good thermal stability. Its the high grade refractory materials. Fused White Alumina advantages: 1, High grade processed alumina as raw material. 2, High hardness, big specific gravity, 3, Good chemical stability and unique self-sharpening 4, Acid-alkali and corrosion resistance 5, Temperature tolerance 6, Higher efficiency and good thermal stability White aluminum oxide for refractory advantages: 1, No ferric contamination 2, Strict control of size distribution and other physical and chemical properties 3, Excellent thermo - mechanical properties, thermal shock resistance 4, High volume stability 5, High density, low permeability for producing high refractoriness 6, High chemical resistance and chemical stability
Brown fused alumina for refractory advantages: 1) High quality bauxite as raw material 2) Refractory temperature is more than 1900°C 3) No burst,no pulverization and crack in the using course of refractory 4) Very low amount of iron oxide 5) Low coefficient of linear expansion Brown fused alumina for Abrasive Sandblasting,Precision casting advantages: 1) Not affecting the color of the processing cases. 2) The high grinding ability 3) High speed processing. 4) Very low amount of iron oxide, suitable for non-ferrous blasting operations. 5) Easy to shell
white fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It has higher hardness and slight lower toughness comparing with brown fused alumina. It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency. White fused aluminum oxide becomes the first choice for the sandblasting technics, meanwhile, it is also the ideal material for sandblasting and workpiece cleaning, and polishing.
Calcium aluminate advantages: 1) Uniform chemical compositions, low melting point, high melting speed, and short smelting time; 2) It has no fluoride and doesnt erode furnace lining and ladle, and it is compact, non-absorbent,and easy to storage as well; 3) Stable phase and fast dust-reducing speed, rapid desulfurization effect stabilized at 60%, and suppresses phosphorus into molten steel; 4) Improving the protective effect and reducing erosion to ladle lining. Specification: Fused Calcium aluminate: SpecificationChemical composition(%) CaOAl2O3SiO2Fe2O3TiO2MgO A53-5930-383.51.52.02.0. B50-5635-444.02.02.02.0 C47-5341-453.51.52.02.0 D60-6527-335.02.02.52.0 E67-7223-275.02.52.52.0
Purity is 99.99% The 99.99% alumina powder (4 N) produces has as three different phase states α,θ and γ. The primary particle average size is 40 nm and the particle size distribution (D50) can be adjusted between 1-40 µm depending on clients's demands. Application for : Tricolor Phosphor, Long Afterglow Phosphor, YAG Phosphor, Synthetic Stone Luminous powder
Sand blasting abrasives Fused brown alumina BFA Brown fused alumina is made of bauxite/anthracite coal. Abrasive tools made by brown fused alumina are suitable for metal with high tensile(like: steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting precision casting, and also for refractory material. Brown fused alumina with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
