Name: sand disc abrasive disc Application: with eletric tools and pneumatic tools for stripping primer and paint , sanding bare wood , sanding plastic Features: improved performance, extended life. No risk of colour transfer, less downtime. Custormize size. 1pcs/opp bag, 100pcs/carton.
1. Product Description The alumina grinding ball has been widely used in ball mills as abrasive media for ceramic raw materials and glaze materials in ceramic factories, cement factories, enamel factories and glass work owing to the excellence of high density, high hardness, high wear resistance. During the abrasive/grinding processing, ceramic balls will not be broken, it will not pollute the 95%material to be grinded. 2. Type According to the content of aluminum: 60-70%, 65-75%, 92%, 95%. According to the specification: 10mm-75mm. 3. Features: 1) High density. 2) High hardness. 3) Very low wear resistance. 4) Widely used for milling minerals and ceramics. 5) High efficiency, lower cost 6) Three kinds of high alumina grinding balls and one kind of alumina lining available. 7) High alumina grinding balls (white surface and body): a) Usual Al2O3: 92% b) Density: 3.62 - 3.65g/cm³ c) Grinding lose (abrasion): 0.015% (0.15g/kg.h) d) Applications: milling and grinding any kind and color of ceramic materials and minerals, including sanitary wares, white glaze materials, iron ores, and copperores e) We call it white ball 8) High alumina grinding balls (white yellowish surface and body): a) Usual Al2O3: 65 - 70% b) Density: 2.90 - 3.05g/cm³ c) Grinding lose (abrasion): 0.03% (0.3g/kg.h) d) Applications: milling and grinding any kind and color of ceramic materials, including sanitary wares and white glaze materials e) We call it yellowish ball 9) High alumina grinding bricks and lining (white surface and body) a) Usual Al2O3: 92% b) Density: 3.58 - 3.65g/cm³ c) Grinding lose (abrasion): 0.015% (0.15g/kg.h) d) Applications: milling and grinding any kind and color of ceramic materials and minerals, including sanitary wares, white glaze materials, iron ores, and copperores e) We call it white brick or white lining. 25kg/bag or 1MT/bulk bag.
(1) Introduction: The inert alumina ceramic ball is broadly utilized as the covering or supporting materials of the catalyst in the reactors and the packing in the columns in such varied areas, for example, petroleum, chemical industry, chemical fertilizer, natural gas, and environmental protection etc. There are lots of merits for it, for instance, the stronger resistance to high temperature and high pressure, lower ratio of the moisture absorbing, more stable chemical properties, and so on. It is capable of enduring the corrosion of acid, alkali, and organic solvent. In addition, it can also bear the rapid transitions of temperature during the operation. In fact, its principal functions are to accelerate the distribution of gas or liquid, and support or protect the active catalyst, which especially has the relevantly lower mechanical strength. This product, which had been developed by our group company, had gained the award of excellent new product and the prize of the science and technology improvement of Jiangxi province in 1988. In the same year, this product entered the national honor roll of the excellent new product. In 1990, it gained the national certificate of the science and technology achievements. In 1996, it also got the provincial certificate and the golden prize of the famous brand product. Of late years, it has always been recommended by SINOPEC. Since it entered the market, all circles of customers had realized that its properties and effects are the same as the foreign products, and some of the technological index has surpassed the same foreign products. (2) Main specifications and types: Specifications and allowable deviation of diameter¡¡ The product of other specifications can also be prepared according to customers' requirement. (3) Notice to ordering goods a) When ordering goods, customers should introduce the radical situations of the equipment, including the sizes of reactors, and the operational temperature etc. b) Customers should provide the specification, types, and the total content of Si, Al related to the required product. c) As the inert ceramic ball belongs to the natural tight stacking in the reactors, customers should consult with our technological staff to determine the amounts according to the practical loading volume, and remain 15-20% margins. (4) Product Standard Chemical Industry Standard HG/T 3683.1 - 2000 Industrial Ceramics Ball - Inert Ceramic ball. Doulble woven bag and palletized, 25kgs/bag, 40bags/pallet.
R80 M42 Bimetal band saw blade Advantages: 1). Austria best backing materials 2). The materials¡¯ molybdenum content is more than 2%. 3). Japanese M42 High speed steel. 4). Unique tooth hardening treatment process. 5). A variety of sizes and wide range of tooth type. Features & Applications: 1). tooth is with high red-hardness performance and wear-resistance. 2). backing is with special anti-fatigue, 3). band saw blade life extending very much, 4). adapt to all kinds of metal material cutting, 5). particularly suitable for sawing tool and die steel, bearing steel, stainless steel 6). high-temperature alloys etc, difficult cutting metal. We can weld your band saw blade to ANY length. all sizes is as follows: 27 x 0.90 mm ( 1 x 0.035 inch) 34 x 1.06 mm (1-3/8 x 0.042 inch) 41 x 1.25 mm (1-5/8 x 0.050 inch) 54 x 1.60 mm (2-1/8 x 0.063 inch) 67 x 1.60 mm (2-5/8 x 0.063 inch).
UBN-8 Flash Butt Band saw blade welding machine, modeled on Germany Ideal.
TECHAMP brand bimetal band saw blade is the idealist cutting tools made by Hunan Techamp Saw & Manufacture Co., Ltd. With our proprietary backing steel TS80 and robust M42 high speed steel edge provides superior heat and wear resistance. And it is made by advanced precise cutting and special heat-treatment techniques according to international advanced standard. Its quality can be ensured. Precision milling and setting machine make the teeth equal height and separated symmetry rate reach international advanced level. The appearance of cutting will be very precision and smooth. Special heat-treatment endows the teeth with good hardness and abrasion resistant, and the blade with good fatigue resistance. The blade service life will be longer. With advanced management and massive production, the cost is lowered. Our price and quality rate ranks the first in China. TECHAMP Bimetal band saw blade has various sizes and types, which will satisfy all customers¡¯ needs. It is also available in coil or welded in certain length to meet customer's requirements. 13mm 19mm27mm34mm41mm.
GZ4240, G4240 column horizontal bandsaw machine is mainly used to cut various ferrous and nonferrous metals. It is characterized by narrow cuts, material and energy saving, high accuracy, easy operating, high efficiency good rigidity. The machine is equipped with the automatic material feeding system. 1.The saw bow don't feed when workplace isn't be clamped. 2.The machine will stop in case of blade broken or stuck. 3.The digital display unit show cutting length, min length 1 mm. 4.Automatic cuts counting to stop machine when finished the preset cutting number. The hydraulic blade tension offer easy and quick operate. 5.PLC controls make the performance stable and reliable. 6.The column-structure is advanced and reliable. The semi-automatic horizontal band saw G4240 without these feature mentioned in above item2, 3, 6.
Two materials, a ribbon of cobalt high speed steel (HSS) for the teeth and spring tempered alloy steel as a backer material, are welded by the electron-beam welded machine. This welding process results in an optimal combination of material with respect to saw blade resistance to wear and fatigue. The material is suitable for producing band saw, hole saw, hacksaw, reciprocating saw and some other cutting tools TS80: Proprietary backing steel preparation increases fatigue life and minimizes band breaks£¬Chinese backer + Japanese teeth. B318: By using premium quality raw materials from Austria and Japanese.
Non woven nylon abrasive grinding wheel 1. Made up of high temper nylon 66 staple, good quality abrasive and special gule. 2. Easy to be used for multi layers net structure 3. No ratation direction limit. Specification (diameter * thickness/inch): 6*1 /8*1 /2*2 /3*2 /4*2 /5*2 /6*2 /7*2 /8*2 /9*2 /10*2 /12*2 /14*2 /16*2 /18*2 /20*2(inch) Grit : 46#---3000# Hardness: 2p---28p, or according customers requirment Colour: grey/red/green/white/maroon/brown/dark brown Bore: all sizes hole:cycle/square/hexagon/cross, etc.Can also add different kinds of tubes. Max rotation speed: 3000r/min Main application: All kinds of metals, wooden wares,Plastic wares,Marble Function: weld grinding, surpace preparation,blending cleaning,deburring. Feature: Keep colour and shape, good polished brightness, no black discoloration, abration resistant, stable, durable. Plastic bag and carton box.
Zirconia Fused Alumina grains based on ISO standard, FEPA standard, P standard for coated abrasives & JIS standard. Grits availabe are as following: FEPA standard: F12~F120 ISO standard: F12~F120 P standard: P12~P120 JIS standard: #12~#120. A.40 x 25kg plastic woven bags in one big bag. B. In 1000kg big bag. C. In 25kg plastic woven bags. D. 40 x 25kg plastic woven bags on pallet. E. 40 x 25kg paper bags on pallet.
80m/s, 13300 1/m, WA60 Extra, EN12413. 115x1x22, 115x1.2x22, 125x1x22, 125x1.2x22.
1 Application: For both cutting and surface edge grinding for various materials, such as steel, stone, stainless steel, metal, etc 2 Characteristics: cutting and grinding,high efficiency 3 Any specification you need, we can design and produce. Any size you need, we can make it for you. 4 Top quality and safety controlled by special and professional equipment 5 Package:as our standard or packaged as customer's requirement.
Dimension: 100 X 16mm, 115 X 22mm, 125 X 22mm, 150 X 22mm, 180 X 22mm, 230X22mm Grain: CC,AA,ZA Coating: Close Coated, Semi-open Coated Base: Fiber paper Punching Model: round hole, cross hole, asterisk hole. Simple packing(shrink wrapped) Or according to customer's requirements.
Take triangel velcro disc for example: Dimension: 80 x 80 x 80mm, 82 x 82 x 82mm, 90x90x90mm, 93x93x93mm, 94x94x94mm, 95 x 95 x 95mm, 105 x 105 x 105mm, 120 x 120 x 120mm or according to customer¡¯s requirement Grain: cc, aa, wa Coating: close coated, semi-open coated, stearate coated Base:paper(c-wt, d-wt, e-wt, f-wt), cloth(j-wt, x-wt, y-wt) Punching model:no hole, with holes or according to customer's requirement. Simple packing(shrink wrapped) Or according to customer's requirements.
1. Production specification: s930, s780, s660, s550, s460, s390, s330, s280, s230, s170, s110, s70 2. Chemical composition of the products: c 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Hardness: normal: 40-50hrc special: 52-56hrc, 56-60hrc density: 7.4g/cucm 4. Steel shot is used for industrial foundry, forging plant, heat treatment shop, steel construction plant, container manufacturer, ship builder, auto and locomotive manufacturer . 5. Microstructure: tempered marten site high strength, durable ervin life: cast steel shot: 2000 cycles Pallet or bags
1. Production specification: s930, s780, s660, s550, s460, s390, s330, s280, s230, s170, s110, s70 2. Chemical composition of the products: c 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Hardness: normal: 40-50hrc special: 52-56hrc, 56-60hrc density: 7.4g/cucm 4. Steel shot is used for industrial foundry, forging plant, heat treatment shop, steel construction plant, container manufacturer, ship builder, auto and locomotive manufacturer . 5. Microstructure: tempered marten site high strength, durable ervin life: cast steel shot: 2000 cycles Pallet with 40 bags of 25 kgs
1. Production specification: s930, s780, s660, s550, s460, s390, s330, s280, s230, s170, s110, s70 2. Chemical composition of the products: c 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Hardness: normal: 40-50hrc special: 52-56hrc, 56-60hrc density: 7.4g/cucm 4. Steel shot is used for industrial foundry, forging plant, heat treatment shop, steel construction plant, container manufacturer, ship builder, auto and locomotive manufacturer . 5. Microstructure: tempered marten site high strength, durable ervin life: cast steel shot: 2000 cycles Pallet with 40 bags of 25 kgs
1. Production specification: g10£¬g12, g14, g16, g18, g25, g40, g50, g80, g120 2. Chemical composition of the products: c 0.70-1.20%, mn 0.60-1.20%, si0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Gp: 42-50hrc (399-509hv) Gl: 56-60hrc (620-713hv) Gh: 63-66hrc (795-889hv) 4. Microstructure: tempered marten site high strength, durable, ervin life: cast steel grit: 2500 cycles Pallet with 40 bags of 25 kgs
1. Production specification: g10£¬g12, g14, g16, g18, g25, g40, g50, g80, g120 2. Chemical composition of the products: c 0.70-1.20%, mn 0.60-1.20%, si0.40-1.20%, s¡ü0.05%, p ¡ü0.05% 3. Gp: 42-50hrc (399-509hv) Gl: 56-60hrc (620-713hv) Gh: 63-66hrc (795-889hv) 4. Microstructure: tempered marten site high strength, durable, ervin life: cast steel grit: 2500 cycles Pallet with 40 bags of 25 kgs
1. TCT circular saw blade 2. Carbide tipped: ceratizit carbide tipped 3. Body material: luxemburg 75CR1 4. Your cusomized accepted. 1. Carton boxes 2. Pallet.
