1518 Anodes Of 88 Kg Each With A Total Of 121.5 Tons. Approx. Value Usd917.05
Ex Work Mine.
Skills Requirement Anodes:
Technical Description:
1. The Surface Of The Anode Plate Is A Lead-based Alloy Rolled Plate, And The Composition Of The Lead Alloy Plate: Sn: 0.8â?¡0.02%,
Ca: 0.08-0.1%;
2. Lead Raw Materials Used In Lead Alloys Are Pb 99.99 Lead Ingots Specified In Gb/t 469: The Chemical Composition Of Copper Conductive Beams Is T2 Red Copper Specified In Gb5231;
3. The Quality Of Lead Alloy Plate Refers To Ys/t 498-2006, The Surface Is Smooth, Clean And Flat, No Cracks, Layers And Slag Inclusions Are Allowed;
4. The Thickness Of The Lead-coated Layer Is Uniform And Tightly Bonded With The Copper Rod, The Surface Is Smooth Without Flash, Burr, Pores And Inclusions, And The Surface Has No Deep Scratches;
5. The Welding Seam Is Welded By The Reverse Button Method (the Plate And The Beam Have Dovetail Grooves) To Ensure The Welding Seam Of The Beam And The Plate Is Firm.
8 Welded Wire Mesh Suppliers
Short on time? Let Welded Wire Mesh sellers contact you.
1980 Cathodes of 42 kg each with a total of 83 tons. Approx. value
USD467.17 ex work mine.
Skills requirement Cathodes:
Technical Description:
Board surface: 316L stainless steel, surface finish: 2R (Ra0.30-0.50um), there should be no micro-cracks and no obvious scratches or scratches on the board surface, and no deformation such as unevenness, delamination, etc. is allowed.
The flatness of the board surface is less than or equal to $1.5mm, the plumbness of the board surface: the error at the bottom of the board surface is less than or equal to 3mm, and the difference between the diagonal lines is less than or equal to $1.5mm.
Conductive rod (steel-copper composite rod): The conductive rod is clad with copper, the copper is T2 electrolytic copper, and the steel is 316L stainless steel.
The center line of the conductive rod coincides with the surface of the board, and the perpendicularity (drape) of the board surface and the conductive plane of the conductive end is +3mm; the parallelism of the two conductive planes of the end of the conductive rod is $0.5mm.
The bottom milling "V°-shaped groove is opened, and the conductive beam and the stainless steel plate are fully welded by fully automatic laser on both sides.
TECHNICAL NAME: IRON ORE FROM 63% TO 64%.
ORIGIN: PERU
QUANTITY: 50.000- 150,000 MT PER MONTH.
PACKAGING :BULK
CONTRACT :SUPPLY YEAR 2.000.000 MT.
PAYMENT METHOD: SBLC / DLC TRANSFERABLE, DIVISIBLE and IRREVOCABLE. MT 760 DIVISIBLE AND TRANSFERABLE /MT 103 - TT- WIRE (TOP 25
BENCH).
TYPE OF CONTRACT AND VALUE OF PRODUCT:
FOB Port of Peru USD 72 MT
DURATION OF THE CONTRACT: 12-MONTH CONTRACT, RENEWABLE BY AGREEMENT OF THE PARTIES.
CERTIFICATIONS :SGS OF QUALITY AND QUANTITY AT PORT OF ORIGIN.
VENDOR COMPANY: MAKES CONTRACT AND OFFERS 2% PERMANCE BOND GUARANTEE TO THE BUYER.
Additional Information: Consider That, Once The Contract Has Been Signed, The First
Shipment Will Be Made 15 Days After The Payment Document Has Been Accepted, And
Successive Deliveries Every 30 Days.
COMMERCIAL PROCEDURE
1.- The buyer issues an official order (LOI / CPO accompanied by CP company profile), proof of funds (RWA),
passport copy and company registration to the seller to which the seller responds with an FCO.
2.- The Buyer as a token of acceptance sends by e-mail the signed and stamped confirmation of the offer
submitted by the Seller, with the respective date of acceptance.
3.- Buyer and Seller discuss the conditions set forth in the Draft Supply Contract, as a sign of acceptance, sign
the terms and conditions, procedure to formalize the contract, which will be sent via e-mail.
4. The Buyer's Bank shall, within five business days, send the draft financial instrument (SBLC) to
the Seller's nominated Bank.
5. The Seller will then send the POP documents to the buyer: A.-
Certificate of Origin.
B.- Supply commitment. C.- Product
passport.
d.- Declaration of product availability.
Once the draft of the financial instrument is approved, the Buyer's Bank issues the instrument
(SBLC) to the Bank designated by the Seller.
7.- Once the Financial Instrument is confirmed, the Seller will send the complete POP and the
following documents v�?Ã?Âa Swift from bank to bank:
A.- Export Permits of the Product,
B.- Certificate of title of the allotment title. C.- Port Storage Contract.
D.- Transportation contract to the port of unloading.
E.- Quality and quantity certificate from SGS.
F.- Bill of Lading (BL).
8.- contract deliveries start as agreed.
9.- The buyer performs an SGS inspection at the port and/or airport of delivery.
Note: Immediate availability to load 200,000 MT IRON.
MERCHANDISE SPECIFICATIONS:
Merchandise: Copper Cathode
Fineness: 99,5%
Assay: The material will be evaluated by the BUYER, upon delivery, by a person qualified to do
so, certifying the content of 99,5 % +,/ - either at the International Departure port Terminal chosen
by the SELLER. The appraisal report will be accepted by both BUYER and SELLER. If
everything is in agreement, the material will be considered DELIVERED, by signing the respective
Packing List and the payment will be RELEASED.
Delivery: CIF
Origin: East Africa
Packaging: International standard pacquing metals.
Contracted Quantity: Start with 20.000 tons, monthly increase of 10.000 tons until the required 50.000 tons are
met contract duration 36 months CIF - ASWP
Contract Period: Up to 36 months.
Shipment: 1 month 20.000 tons, from the 2nd month, 30.000 tons, 3rd month, 40.000 tons, 4th
month, 50.000 tons, from the 5th month, 50.000 tons are sent, until the end of the contract the for 36
months - CIF.
NOTE1: The Mining Company does not charge for transportation the Cooper Cathod to the
Departure Port chosen by the Seller, as this cost is already part of the metal's sales value.
Price: LME (-) 17% ( Net to the buyer.) of the Cooper Cathod value in the LME - CIF
History:
Clean, clear, free of charge and without criminal origin.
Payment: Through SBLC/ MT760/ MT799 / MT103/202 or similar Code Based on the final Assay
report at Departure Port, against BL ...The Buyer used an MT-103 Wire Transfer inmediately.. MT
103 or similar.
Deliver to: International destiny port ASWP
CLOSING PROCEDURES:
Buyer send LOI full And RWA. To Mr. Manuel GarcÂa Asin ( Commercial manager)
Buyer send a ICPO in aceptance of the SCO ( ofert)
Seller send the SPA.
Outline of the issuance of Seller SPA (open for amendment) within 48 hours after receiving the
approval of this supplier, with request of the Buyer on the total amount of required. Buyer signs and
seals SPA and returns to seller. Both parties must present a copy of the SPA with the respective
banks. At 3 (three) business days, the Buyer's Bank shall submit a SWIFT SBLC /MT760 or
MT103/202 or similar Code to the Seller's Bank for the first 5,000 ton. to 10,000 tons. per month,
for 36 months - CIF. Up on receipt and confirmation of the Buyer's SBLC/ MT760 or MT103/202 or
similar code, the Seller's Bank will be confirmed by the Buyer's
