Calcium Carbonate is a highly versatile mineral compound extensively used across various industries due to its superior quality, purity, and wide range of applications. Extracted from naturally occurring high-purity limestone, it appears as a fine white powder. Our calcium carbonate is produced through meticulous processing to ensure consistent particle size and chemical composition, making it suitable for numerous industrial, commercial, and consumer uses. Applications: -Industrial, - Construction, - Agriculture, - Animal Feed, - Pharmaceutical, - Food Industry, - Water Treatment,
Sodium Hydroxide Solution is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Appearance: A clear colorless liquid free from foreign matter Relative Density at 40�°C: 1.506 % Sodium Hydroxide [as NaOH]: 48.80% Sodium Hydroxide (On Dry Basis) [as NaOH] : 99.80% Sodium Carbonate [as Na2CO3]: 0.084% Chlorides [as Cl] : 0.004% Sulphate [as SO4] : 0.005% Silicates [as SiO2] : 0.003 % Copper as [as Cu]: 0.08 ppm Manganese [as Mn]: 0.06 ppm Iron [as Fe]: 4.02 ppm Matter insoluble in water: 0.010ppm
Sodium Hydroxide Flakes is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. Physical Appearance White Flakes, Material shall be free from foreign matter, dirt or other visible impurities Sodium Hydroxide [as NaOH] Min. 99.50 Sodium Carbonate [as Na2CO3] Max. 00.40 Chlorides [as Cl] Max. 00.030 Sulphate [as SO4] Max. 00.030 Silicates [as SiO2] Max. 00.02 Iron [as Fe] Max. 20.00 Copper [as Cu] Max. 02.00 Nickel [as Ni] Max. 02.00 Manganese [as Mn] Max. 01.00 Chlorates & PerChlorate [as NaClO3] Max. 10.00 Matter insoluble in Water. Max. 00.050
We are enlisted as top company involved in offering a wide range of Ground Calcium Carbonate
Mumal Microns is produces Precipitated Calcium Carbonate Powder which is white ultra fine crystalline powder
We offer good quality Calcite (Natural Calcium Carbonate) that is highly demanded in the market for its purity
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
BrightOmni UP is a Disulpho type Fluorescent Whitening Agent with high affinity for Paper in wet end applications to achieve high whiteness and brightness properties of Paper. It Can be added either batch wise in the mixing chest or continuously at suitable dosing points in the stock preparation system. It Should be applied prior to either alum or cationic auxiliaries. Typical average dosage is 2 - 6 kg/Ton of dry pulp depending on: - Type of furnish - Base pulp pH and brightness - Desired brightness and whiteness gain
Methanol with the mentioned specifications
Methanol Technical Data Sheet Property Specification Analytical Test Methanol Purity WT % 99.85 min IMPCA 001-21 Water W/W% 0.100 Max ASTM E91064 Ethanol W/W% 0.0050 Max IMPCA 001-21 Specific Gravity 20/20,C 0.7928 Max. ASTM D-4052 Acetone, W/W% 0.0030 Max. IMPCA 001-21 Permanganate Time Test @ 15 C, Minutes 60 Min. ASTM D-1363 Non Volatile Matter, mg/1000 ml 8 Max. ASTM D-1353 Distillation Range @ 760mm Hg C 1.0 Max., ASTM D-1078 Color Pt-Co, APHA 5 Max. ASTM D-1209 Carbonizable APHA 30 Max ASTM E-346 Total Iron, mg/kg 0.10 Max ASTM E-394 Chloride as CI, mg/kg 0.5 Max ASTM D-512 Appearance Clear and free from suspended matter IMPCA 003-98 Acidity as CH3COOH, W/W% 0.0030 Max, ASTM D-1613 Hydrocarbons Pass Test ASTM D-1722 Sulphur mg/kg 0.5Max, ASTM D-5623 Aromatics, UV Test Passes Test IMPCA 004-15
1. Bleaching liquid: 6.5%, by dissolving 100g of 65% calcium hypochlorite in 1000L of water. 2. Disinfectant fluid: 1ppm, by dissolving 1.7g of calcium hypochlorite in 1000L of water. 3. Calcium hypochlorite can be widely used as algicide, bactericide disinfectant, bleaching agent or oxidant because of the available chlorine in the product. For example, it has a wonderful disinfections for swimming pool, drinking water, cooling tower& ore dressing and waste water, food, farming, fishery, hospital, school, station and household etc., good bleaching and oxidation are also found in paper and dye industrial.
we can supply Calcium Carbonate. Our Calcium Carbonate quality is the best in the market region and we are exporting
Calcium carbonate CACO3 45% to 98% whiteness 80% to 95% lumps/boulder & fine powder 100% pure best export quality lumps supply per month 20,000/30,000 m/ton approximate & calcium carbonate Powder Mesh 400/600/800/1200 & Poultry feed Industry Gran 2 mm...
Appearance Visual Clear & Free of suspended Method Specific Gravity @ 20/20 Deg ASTM D-4052 Kg/L 0.7930 IBP ASTM D-1078 OC 64.2 DP 65.2 Purity GC % m 99.85 Total Chlorides UOP 779 Mg/kg
Caustic Soda flakes Purity>99% , Membrane Grade
One of the most well-known and sought-after byproducts of the refining process of vegetable (mostly sunflower) oil are fatty acids. Fatty acids, an industrial product with a GMP+ certification, are mostly used in the animal formula and feed sector. This is because adding fatty acids or fatty acid-based compounds to an animal feed ration can reduce feed costs. Fatty acids are crushed and processed through a whole cycle. In addition, they are utilized in the manufacturing of soap, glycerin, and stearin, as well as in the food processing industry as a direct formula component. Tocopherols.
Glycerol (also known as glycerin) is a major byproduct in the biodiesel manufacturing process. In general, for every 100 Metric Tons of biodiesel produced, approximately 8 Metric Tons of crude glycerol are created. Crude glycerin can be refined to obtain refined glycerin with a purity of more than 99%. Glycerine is a water-soluble, clear, almost colorless, odorless, viscous, hygroscopic liquid with a high boiling point and has over 1500 known end uses. Major, or large volume, applications include some dozen different categories that range from foods to soaps and detergents.
1. What is PFAD PFAD stands for Palm Fatty Acid Distillate. It is a processing residue resulting from physical refining of crude palm oil products. At room temperature it is a light brow semi-solid, melting to a brown liquid on heating. Up to 80 percent of PFAD is free fatty acid (FFA), with palmitic acid and oleic acid being the major components. The remaining 20 percent is made up of components including triglycerides, partial glycerides, and vitamin E, sterols and squalene's. 2.How is PFAD used? PFAD is used as a renewable raw material in biofuels production as well as to produce candles, soaps, other oleochemical products, and animal feed. Specific to biofuel production in Europe, the EU allows Member States to account PFAD consumption towards greenhouse gas emissions reductions under its Renewable Energy Directive. The amount of emissions reductions depends on the PFAD technical classification, a residue or co-product, which is up to the individual Member State. To verify the emissions reductions, the EU relies on voluntary certification schemes, such as the International Sustainability and Carbon Certification system. 3.What are the benefits6 of using PFAD Producing renewable fuels using PFAD is good for the climate. It is an efficient way to use waste generated through the palm oil refining process, preventing PFAD from going to literal waste. A by-product that is undesirable from the food industry perspective can be very desirable for other sectors. Neste MY Renewable Diesel7 which is refined from PFAD and other waste and residue materials, such as Used Cooking Oil (UCO), helps to replace crude oil-based diesel in transportation. Using Neste MY Renewable Diesel can reduce greenhouse gas emissions by 90 percent on average compared to a diesel-powered vehicle using conventional fossil fuel-based diesel.
