Forged - Quenched and Tempered. Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk. Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and snown on pages 89-91. Even years after purchase of the original hook, latch assemblies can be added. Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks, see page 84 for proper Hook Identification Codes. Hoist hooks incorporate markings forged into the product which address two QUICK-CHECK features: Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload. Angle Indicators - Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs. Note Carbon swivel hooks.75tC-15tC: proofload is 2 times working load limit.Designed with a 5 to 1 safety factor. Alloy swivel hooks 1.5tA-22tA : proofload is 2.5 times working load limit. Designed with a 4 to Isafety factor. Alloy swivel hook 31.5tA: proofload is 2 times working load limit. Designed with a 4 to 1 safety factor.
Self Locking Hooks S-316N S-316A SHUR-LOC - Eye Hook Chain Size,S-316A Stock No.,Grade & Alloy chain working load limit(tons) 4:1,Wire Rope XIP IWRC Mechanical Splice,Weight each kg in,mm,size (mm),Working load limit (tons) 5:1 -,6,1097918,1.12,8,0.9,0.39 1/4-5/16,7-8,1097920,2.0,11,1.7,0.82 3/8,10,1097921,3.15,13,2.3,1.47 1/2,13,1097922,5.3,16,3.5,2.70 5/8,16,1097926,8.0,22,6.9,5.78 * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. Positive Lock Latch is Self-Locking when hook is loaded Forged Alloy Steel- Quenched and Tempered Rated for both Wire Rope and Grade 8 Chain Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting Fatigue rated. The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B) G-414 Heavy Thimble should be used with wire rope slings Individually Proof Tested at 2-1/2 times the Working Load Limit with certification Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger Designed with Engineered Flat to connect to Grade . 8 chain fittings.
Eye Hooks For Wire Rope The most complete line of Eye hooks. Available 1/2 ton to 60 tons. Proper design, careful forging and precision controlled quench and tempering give maximum strength. Every Eye Hook has a pre-drilled cam which can be equipped with a latch. Eye hooks are load rated. Available in mild steel and alloy steel.
Single sheave with hook Sheave Size (in) Wire Rope Size (in) Capacity at F. OF S. 4:1 US tons Capacity at F. OF S. 2:1 US tons 4 1/2 3/8 - 1/2 2 1/2 5 6 3/4 8 16 6 3/4 12 24 8 3/4 8 16 8 3/4 12 24 8 1 1/8 22 44 10 5/8 - 3/4 8 16 10 3/4 12 24 10 1 1/8 22 44 12 5/8 - 3/4 8 16 12 3/4 12 24 12 1 1/8 22 44 14 3/4 12 24 14 1 1/8 22 44 Features Bearings The 4 1/2" Block is fitted with special bronze bush but can be fitted with taper roller bearings wIth special bronze bush if requested. Capacity The 4:1 capacity load given in the table are the maximum head fitting loads that should be applied to the Blocks.These capacity loads are based on a Fador of Safety of 4:1 and the Blocks are proof tested to twice this capacity load.The table also details a comparative capacity load at Fador of Safety2:1 so that the users may compare the 'High Load' Blocks with alternative makes based on this Lower Safety Fador. Double Sheave Light champion snatch block as a double sheave block. Drop forged swivel hook or swivel shackle. Can be furnished with bronze bushing and roller bearings. Opening features permits easy insertion of wire rope in both sheaveswith removal of one bolt. Can be furnished with hook latch. Pressurelube fittings. Fatigue rated.
Manilla Rope Pulley Block,, Dia. of Sheave, Dia of Rope, S. W. L. in kg, No. Sheave, 3 1/2, 1/2", 100, Single, 31/2, 1/2", 150, Double, 3 1-2, 1/2", 250, Triple, 4", 5/8, 150, Single, 4", 5/8, 200, Double, 4", 5/8, 300, Triple, 4 3/4, 3/4", 200, Single, 4 3/4, 3/4", 400, Double, 4 3/4, 3/4", 500, Triple, 6", 1", 500, Single, 6", 1", 1000, Double, 6", 1", 1500, Triple, 7", 1 1/4 600, Single, 7", 1 1/4, 1500, Double, 7", 1 1/4, 2000, Triple, 8", 1 1/2, 1000, Single, 8", 1 1/2, 2000, Double, 8", 1 1/2, 2500, Triple, 10", 2", 1500, Single, 10", 2", 2500, Double, 10", 2", 4000, Triple
Pool Type Anchor (CB 3221 - 84) Normal Weight, A, B, C, D, E, F 12, 385, 325, 275, 250, 65, 155, 20, 455, 385, 325, 300, 75, 185, 40, 570, 480, 410, 370, 95, 235, 60, 655, 555, 470, 425, 110, 270, 80, 720, 610, 515, 470, 120, 295, 100, 775, 655, 555, 505, 130, 320, 120, 825, 700, 595, 540, 135, 340, 160, 905, 765, 650, 590, 150, 370, 200, 975, 825, 700, 640, 160, 400, 240, 1040, 880, 745, 680, 175, 425, 280, 1090, 925, 780, 715, 180, 450, 320, 1140, 965, 820, 745, 190, 470, 360, 1190, 1005, 855, 780, 195, 490, 400, 1230, 1040, 885, 805, 205, 505, 440, 1270, 1075, 910, 830, 210, 90, 480, 1305, 1105, 940, 855, 215, 535, 520, 1340, 1135, 960, 875, 220, 550, 560, 1375, 1165, 985, 900, 230, 565, 600, 1410, 1195, 1010, 920, 235, 580, 640, 1440, 1220, 1035, 940, 240, 590, 720, 1495, 1265, 1075, 975, 250, 615, 800, 1550, 1310, 1115, 1015, 255, 635, 900, 1615, 1365, 1160, 1055, 270, 665, 1000, 1670, 1410, 1200, 1090, 275, 670, 1250, 1800, 1525, 1290, 1175, 300, 740, 1500, 1910, 1615, 1370, 1250, 315,
High Holding Anchor Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.
Sole selling agent in India of for Anchors Dazu Xingye Marine Casting Co. Ltd.
Single Chain Sling Two Leg Chain Sling Three Leg Sling Four leg Sling Double Loop Endless Sling Proof Load Testing After final heat treatment slings with accessories shall be tested as an assembly, multi- leg chain slings shall be tested in sections. Individual sections of the chain slings shall be subjected to 2.0 times the load to which the section will be subjected when the assembly is subjected to its working load limit in accordance with the plan. Lifting capacity of sling / working load limit (MT) Rating Single Branch slings Single branch slings shall have a working load limit equal to that of the Chain used in their construction Multi Branch slings Multi branch slings shall be rated at a uniform working load limit for an angle between branches of 90o-120o(45o- 60o to the vertical) or additionally a ta uniform working load limit for any angle between branches of 90o-120o(45o- 60o to the vertical ). Uniform Load Method Double branch slings For all angles between branches from 0°- 90° (0°- 45° to the vertical) WLL = 1.4 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical) WLL = 1 x WLL of single branch made from similar chain. Three and four branch slings For all angles between branches from 0°- 90° (0°- 45° to the vertical) WLL = 2.1 x WLL of a single branch made from similar chain. When additionally marked for angles between branches of 90°- 120° (45°- 60° to the vertical) WLL = 1.5 x WLL of single branch made from similar chain.
S-316N S-316A SHUR-LOC - Eye Hook Chain Size S-316A Stock No. Grade & Alloy chain working load limit(tons) 4:1 Wire Rope XIP IWRC Mechanical Splice Weight each kg in mm size (mm) Working load limit (tons) 5:1 6 1097918 1.12 8 0.9 0.39 1/4-5/16 7-8 1097920 2.0 11 1.7 0.82 3/8 10 1097921 3.15 13 2.3 1.47 1/2 13 1097922 5.3 16 3.5 2.70 5/8 16 1097926 8.0 22 6.9 5.78 * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. Positive Lock Latch is Self-Locking when hook is loaded Forged Alloy Steel- Quenched and Tempered Rated for both Wire Rope and Grade 8 Chain Meets ASTM A-952-96 and proposed Euronorm standards for Grade 8 chain fitting Fatigue rated. The SHUR-LOC-hook, if properly installed and locked, can be used for personnel applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B) G-414 Heavy Thimble should be used with wire rope slings Individually Proof Tested at 2-1/2 times the Working Load Limit with certification Trigger repair Kit available (5-4316). Consist of spring, roll pin and trigger Designed with Engineered Flat to connect to Grade . 8 chain fittings.
Spek Type Anchor Anchor Weight, kg., Dimensions in mm, A, B, C, D, E, H, L, 380, 600, 827, 190, 412, 258, 780, 1080, 480, 650, 902, 205, 442, 280, 846, 1170, 610, 700, 960, 221, 472, 302, 910, 1260, 735, 750, 1030, 235, 502, 320, 975, 1350, 880, 800, 1100, 251, 542, 340, 1040, 1440, 1030, 850, 1170, 270, 568, 362, 1102, 1530, 11050, 900, 1240, 286, 587, 388, 1168, 1620, 1400, 950, 1299, 295, 644, 420, 1229, 1710, 1750, 1000, 1378, 316, 671, 442, 1300, 1800, 2020, 1050, 1454, 330, 706, 460, 1362, 1890, 2360, 1100, 1514, 343, 744, 480, 1424, 1980, 2750, 1150, 1584, 362, 788, 492, 1502, 2070, 3000, 1200, 1650, 380, 801, 520, 1560, 2160, 3700, 1350, 1850, 418, 890, 580, 1743, 2430, 4000, 1400, 1927, 438, 910, 610, 1813, 2520, 5100, 1450, 2000, 451, 954, 626, 1864, 2610, 5800, 1500, 2060, 467, 998, 642, 1946, 2700, 6600, 1550, 2138, 490, 1030, 660, 2006, 2790, 8000, 1700, 2333, 533, 1118, 734, 2210, 3060,
1. Variety: Grade1, Grade 2,Grade 3,ORQ,R3,R3S,R4 stud link anchor chain; studless anchor chain; buoy chain,D-type anchor shackle; Hatch-cover chain,lifting chain,kiln chain and others; DIN Standard chain; Special chain as per your requirments and their accessories. 2. MATERIAL GRADE: ANCHOR CHAIN:GRADE 2/U2, GRADE 3/U3ï¼? MOORING CHAIN:ORQ,R3,R3S 3.Material:20Mn (CM490),30Mn(CM690) 4.Length: 25m or 27.5m or as per your request. 5. FLASH BUT WELED 6.Surface: Self Color, Black Painted, Hot Dip Galvanized 7.Relevant Certificates: ABS, BV, CCS, DNV, KR, LR, GL, NK and RINA etc. 8. Grade U2 / U3 from 12.5mm to 162mm; Grade ORQ / R3 /R3S / R4 from 58mm to 162mm 9. accessories: kenter shackle, joining shackle. anchor shackle,pear type joining shackle buoy shackle type A, Swivel shackle pear type link, trangle plate.
1.Anchor chain and accessories (Stud Link Anchor Chain, Studless Anchor Chain, all types of shackles and connectors) 2.Mooring chain and accessories (Stud Link Mooring Chain, Studless Mooring Chain, Grade ORQ, R3, R3S, R4 )
Material: SS304 or SS316 Surface Finish: Highly polished Packing: Gunny bag or Carton and pallet or according to customers requirement.
Size : SS12 SS20 Color:AB Crystal Packing:10 yards per roll Stone number:280pieces Plated Color : Gold Silver Chain Type : Close Chain Grade: A quality Usage:garment Jewelry Bags Shoes Technics:Sew on Material:Glass
Product size: 7 x 2 x 1.6Cm. Diameter of lock hole: 5mm; 6mm; 7mm.
Product size: 3.9 x 1.9 x 1.5Cm. Diameter of lock hole: 4mm; 5mm; 6mm; 7mm.
Product size: 3.5 x 4.5 x 1.7Cm. Diameter of lock hole: 7mm.
Advantages of Our company: A. 12 years experience, quality guarantee B. Participate in NEPCON South China Since 2009 C. High quality, low cost D. Large stock, fast shipping E. various brands available F. Customization is acceptable
Undercarriage Worlds best undercarriage itr italy shanparts Undercarriage track parts for excavators, bulldozers and other track type machines are our speciality, and we are proud to be amongst indias largest stockists. We offer a reliable and economical solution to any undercarriage need. Our sourcing is from the worlds finest manufacturers only, who mainly supply to original equipment manufacturers (oems). Every part we sell has been built to the performance specifications required for the most rugged application. We ensure you get the undercarriage parts you want, the performance you need and the value you deserve. The itr undercarriage line is studied and designed in the engineering and r&d departments of the usco group using cad systems and with the collaboration of partner universities. A fundamental characteristic of the itr undercarriage product line is that its production is entirely managed in-house: from design of the component to the choice of material, through to production. Numerous quality controls are carried out starting from raw material purchasing based on the know-how and expertise in the field of metallurgical processes and metal materials. Broad expertise covers the entire complexity of the production process from die-casting to heat treatments to the assembly and painting lines. We are proud to be itr under carriages exclusive distributors in india. We stock: Track shoe assemblies Track link assemblies Track & carrier rollers Idlers Sprockets & segments Grouser shoes Recoil springs & track adjusters (tensioners) Track bolts + nuts Track guards
