DSJ-2211 Steel Snap Hook for Climbing And Emergency Rescue, Full Body Harness Swivel Snap Hook Steel Snap Hook for Climbing And Emergency Rescue Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/25kN Net weight: 488g Meets or Exceeds: ANSI Z359.12-19 CSA Z259.12-16 EN362-2004
DSJ-2211-N Steel Snap Hook for Climbing and Emergency Rescue, Sheet Steel Safety Hook Steel Snap Hook For Climbing And Emergency Rescue Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/25kN Net weight: 504g Meets or Exceeds: ANSI Z359.12-19 CSA Z259.12-16 EN362-2004
DSJ-2242 Climbing Swivel Survival Steel Snap Hook, Safety Belt Scaffolding Hook Climbing Swivel Survival Steel Snap Hook Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 386g Meets or Exceeds: ANSI z259.12-09 CSA z259.12-11 EN362-2004
DSJ-2232-N Heat Treated Steel Snap Hook for Climbing And Emergency Rescue Steel Snap Hook For Climbing And Emergency Rescue Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/25kN Net weight: 338g Meets or Exceeds: EN362-2004
DSJ-2281-N High Strength Steel Rope Snap Hook, Scaffold Hook for Safety Belt High Strength Steel Rope Snap Hook Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 852g Meets or Exceeds: ANSI z259.12-09 CSA z259.12-11 EN362-2004
Heavy Duty /Stamped /Mountain Climbing Steel Snap Hook Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 292g Meets or Exceeds: EN362-2004
Hot Air Ballooning /Fall Protection Stamped Steel Snap Hook Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 190g Meets or Exceeds: EN362-2004
Steel Snap Hook For Climbing And Emergency Rescue Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 790g Meets or Exceeds: EN362-2004
Climbing Swivel Survival Steel Snap Hook Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 234g Meets or Exceeds: EN362-2004
Climbing Swivel Survival Steel Snap Hook Sheet steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 472.3g Meets or Exceeds: ANSI Z359.12-19CSA Z259.12-16\EN362-2004
1. nominal size: Nominal diameter of the round section steel wire or bar from which the chain is made. 2. material diameter: Diameter of the material in the chain link as measured. 3. weld diameter: Diameter at the weld as measured. 4. length dimensionally affected by welding: Length on either side of the center of the link, affected by welding. 5. pitch: Internal length of a link as measured. 6. manufacturing proof force(MPF) of chain: Force to which during manufacture the whole of the chain is subjected. 7. breaking force( BF): Maximum force which the chain withstands during the course of a static tensile test to destruction. 8. working load limit (WLL) of chain: Maximum mass which the chain hanging vertically is authorized to sustain in general lifting service. 9. total ultimate elongation (A): Total extension at the point of fracture of the chain expressed as a percentage of the internal length of the test sample. 10. processing: Any treatment of the chain subsequent to welding, for example, heat treatment, polishing or dimension calibration. 11. lot: Specified quantity from which test sample(s) is/are selected. 12. competent person: A designated person, suitably trained qualified by knowledge and practical experience, and with the necessary instructions to enable the required examination to be carried out.
Short link chain for lifting purposes Conforms to the latest revision Grade 100 chain is 25% stronger than Grade 80 chain. Enables you to perform some lifts with lighter weight chain. Produced from the highest quality alloy steel Embossed with G100 and traceability code Quenched and tempered, proof tested In accordance with 4-to-1 design factor required by AS 2321 standard. Blue electrophoresis finish or black electrophoresis finish WARNING: DO NOT EXCEED THE WORKING LOAD LIMITS
Specifically recommended for overhead lifting Grade 100 chain is 25% stronger than Grade 80 chain. Enables you to perform some lifts with lighter weight chain. Meet the latest guidelines of ASTM A973 specifications Produced from the highest quality alloy steel Embossed with G100 and traceability code Quenched and tempered, proof tested In accordance with 4-to-1 design factor required by the ASTM A973 specifications Blue electrophoresis finish or black electrophoresis finish WARNING: DO NOT EXCEED THE WORKING LOAD LIMITS
Specifically recommended for overhead lifting Grade 100 chain is 25% stronger than Grade 80 chain. Enables you to perform some lifts with lighter weight chain. Meet the latest guidelines of the Produced from the highest quality alloy steel Embossed with and traceability code Quenched and tempered, proof tested In accordance with 4-to-1 design factor required by the specifications Blue electrophoresis finish or black electrophoresis finish WARNING: DO NOT EXCEED THE WORKING LOAD LIMITS
Welcome to buy the newest and competitive price DIN5687-80 G80 Lifting Chain, Grade 80 Alloy Lifting Chain from our factory. We're one of the leading manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in in stock are high in quality and low in price. Please be free to get the free sample from us.
Material: High-Quality Alloy Steel Surface treatment: Self-color, Polishing, Blackened,Painted, Plastic Coating, Hot-Dip Manufacture Standard: ISO, DIN, BS, JIS, ASTM Quality Grade: G80/G100 Safety Factor: MIN 4 Product Marking: Required by client We also can make the non-standard chain according to the clients' requirements.
Short link chain for lifting purposes Conforms to the latest revision Standard Grade 100 chain is 25% stronger than Grade 80 chain. Enables you to perform some lifts with lighter weight chain. Produced from the highest quality alloy steel Embossed with G100 and traceability code Quenched and tempered, proof tested In accordance with 4-to-1 design factor required by AS 2321 standard. Blue electrophoresis finish or black electrophoresis finish WARNING: DO NOT EXCEED THE WORKING LOAD LIMITS
AS2321 Short Link Chain Grade T ( 80 ), G80 Alloy Chain, Grade 80 Short Link Chain for Chain Slings
Welcome to buy the newest and competitive price DIN5687-80 G80 Lifting Chain, Grade 80 Alloy Lifting Chain from our factory. We're one of the leading manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in stock are high in quality and low in price. Please be free to get the free sample from us.
Code No. Nominal Size Material Diameter Working Load Limit(MAX) Proof Test(MIN) Breaking Force MIN Inside Length (MAX) Inside Width(MIN) MM IN MM IN KG LBS KN LBS KN LBS MM IN MM IN DS-C0141 7.0 1/4 7.0 0.281 1430 3150 28.0 6300 56.0 12600 31.8 1.24 9.8 0.38 DS-C0142 8.7 5/16 8.7 0.343 2130 4700 41.8 9400 83.6 18800 32.8 1.29 11.2 0.44 DS-C0143 11.9 3/8 10.3 0.406 2990 6600 58.7 13200 117.4 26400 35.0 1.38 14.0 0.55 DS-C0144 13.0 1/2 13.5 0.531 5130 11300 100.4 22600 200.8 45200 45.5 1.79 18.2 0.72 DS-C0145 16.0 5/8 16.0 0.630 7170 15800 140.4 31600 280.8 63200 56.0 2.20 20.0 0.79 DS-C0146 20.0 3/4 20.0 0.787 11200 24700 219.6 49400 439.2 98800 70.0 2.76 25.0 0.98
