Its principle of operation: the material retaining plate which is arranged reasonably with changeable angles in order, throws moisture materials into the rotary cylinder. Then water will be separated from the materials by hot air-flow and changed into vapour to be discharged into the atmosphere. Then the materials would be dried. Rotary dryer is used to dry slag, clay, limestone, etc. It is mainly used for cement, chemical, metallurgical, building materials industries. Its advantages are as follows: high drying capacity, smooth rotation, low energy consumption, easy operation, high output and so on. According to your needs.
The cement complete equipment. According to your needs.
Roller press produced by JIangsu Pengfei Group is developing in the middle of 1980s, which is a new saved-energy cement grinding equipment. It can displace the low efficiency and high consumption ball mill system in part of completely. Reduce the steel consumption and noise. It is suitable to not only new plant construction but also technical revision of old plant. Raise the output by 30-50%. The material which its fineness is 0.08mm covers 20-35% after squeezing the material, and the fineness is less than 20mm which is covered 65-85%. The inner structure of small lump is filled with microdefect. Improve the easy abrasivity. The roller face is heat overlaying welding. It is easy to maintenance in the abrasive layer. According to your needs.
1. Setting storage bucker and input hopper separately and inputting material with rations. 2. Compulsive input device Qtj4-18 adopts compulsive input system (there are several rows of mixing forks in the cloth box), when the cloth box is conveyed up to the mould box, mixing fork will move to input material compulsively, which guarantees the speed of inputting and also makes the inputting equably. 3. Excellent vibration system: The main vibration system of the is composed of vibration machine and vibration box, its frequency and amplitude are adjustable4. Intelligent control we set the parameter for best shaping and most conservative, when the data is higher than the upper limit, the machine can decrease material, when lower than the floor level, it can increase material. 5. Effective worktable The efficiency vibration of the shaping area can reach to 0.5m2 (850 x 550 mm) 6. Multi-function It replaces the mould can produce different size of bricks and blocks.
1. Setting storage bucker and input hopper separately and inputting material with rations. 2. Compulsive input device Qtj4-18 adopts compulsive input system (there are several rows of mixing forks in the cloth box), when the cloth box is conveyed up to the mould box, mixing fork will move to input material compulsively, which guarantees the speed of inputting and also makes the inputting equably. 3. Excellent vibration system: The main vibration system of the is composed of vibration machine and vibration box, its frequency and amplitude are adjustable4. Intelligent control we set the parameter for best shaping and most conservative, when the data is higher than the upper limit, the machine can decrease material, when lower than the floor level, it can increase material. 5. Effective worktable The efficiency vibration of the shaping area can reach to 0.5m2 (850 x 550 mm) 6. Multi-function It replaces the mould can produce different size of bricks and blocks.
1. Product quantity of different . Moulds: 390 x 190 x 190 x 6 pieces/mould (standard concrete brickú¬ . 240 x 115 x 90 x 15 pieces/mould (concrete brick with 8 holes) . 240 x 115 x 53 x 30 pieces/mould (standard brick) 2. Carrier size: 850 x 680 x 40 (wood) 3. Shaping cycle: 12 ~ 18s (depends on the size and Character of concrete brickú¬ 4. Vibration parameter: . Vibration frequency (adjustable) 80hz (max.) . Vibration force (adjustable) 88hz (max.) 5. The total power: 36.8 kw 6. Overall size: 6370 x 2000 x 2510 mm
The series of block shaping machines, which meet the state Standards of gbt8533-1998, are excellent in performance, High in efficiency, and lower in energy consumption. Characteristics: Nine characteristics compared with clay brick: 1. Not using the clay as raw material to destroy any field. 2. Making use of three industrial wastes to change wastes Into valuables. 3. Not using fire to bake blocks and not building kiln to Save the energy sources and fields. 4. No chimney to protect the environment and avoid Pollution. 5. Production process is simple, they can be made Everywhere . 6. Low investment and achieving much faster results, Customers can profit in half a year after investing. 7. The block can be produced all around the year. 8. Good looking, construction convenient, low-floor real Jigsaw puzzle, and the high buildings do filler and cheap. 9. Technical criteria is better than those of red brick and Green brick.
1. Transfer mechanism adopts mechanical drive, and use Mechanical power reasonably and effectively, it can Finish several technology actions without breaking. Transfer mechanism wears well and is convenient for Corrective maintenance. 2. When the machine is forming concrete brick, it librates Up and down. There is vibration table with vertical Orientation under the mould box, and vibrator vibrates With compression over the crossbeam, thus when it Produces concrete brick or pavement block, satisfactory Shaping effect can be achieved, it fits for producing Concrete brick or pavement block of high strength. 3. The machine is of multi-purpose, it can produce Walling unit, pavement block and figure walling unit, Etc. 4. The machine can use common plate as shaping baseboard. 5. The machine operates automatically, has high Manufacturing efficiency, and needs low intensity of labor.
Semi-automatic cement brick machine Parameter: Dimension: 4, 850*4 650*2250 (mm) Molding style:low frequency-adding, high frequency-molding Molding speed: 30 s Pallet/plate size (mm): 850*550*25 ¿bamboo 850*550*14 ¿pvc Engine power: 20.2 kw Weight: 3, 800 kg Vibration frequency: 50-90 hz Max excited force: 50 kn Molding cycle: 20-30 days Installed capacity: 21 kw Production capacity: 300 m/shift Dimension: 4, 850*4650*2250 (mm) Weight: 3, 800 kg
Block machine Parameter: Framework dimension: 680*4, 150*2, 900 mm Pallet/plate size (mm): 1, 100*700*25 (bamboo) 1, 100*700*20 (pvc) Weight: 11, 100 kg Vibration frequency: 50-90 hz Max excited force: 90 kn Molding cycle: 15-20 days Installed capacity: 32.8 kw Product discriptions: 1. Unique designed storing system: double hopper design makes it possible that aggregates can be supplied efficiently and uniformly to avoid pockety. 2. Multi-vibration system: it can send the vibration force to every parts of the mould box synchronously to improve the durability of blocks/bricks. It adopts systematic design of machine, electricity, liquid and computer to meet the big table work.Requirement. The vibration force & frequency are adjustable according to different materials and craftwork procedures: low frequency-adding materials and high frequency-molding. 3. Control system: digital location sensor is used to make sure the accuracy of every operation. Plc photoelectric real-time control system can protect the equipment to work normally. It is high technology researched by ourselves including touch operation and patent oil pump protection. It is more durable. It is easy for the users to operate with the help of real-time prompt facility. 4. Autodiagnostics: real-time malfunction self-diagnosis facility can give an alarm of fault resolution timely. It is combined with the remote control system by telephone lines to make self-diagnosis. Framework dimension: 680*4, 150*2, 900 mm Weight: 11, 100 kg
Block machine Parameter: Framework dimension: 680*4, 150*2, 900 mm Pallet/plate size (mm): 1, 100*700*25 (bamboo) 1, 100*700*20 (pvc) Weight: 11, 100 kg Vibration frequency: 50-90 hz Max excited force: 90 kn Molding cycle: 15-20 days Installed capacity: 32.8 kw Product discriptions: 1. Unique designed storing system: double hopper design makes it possible that aggregates can be supplied efficiently and uniformly to avoid pockety. 2. Multi-vibration system: it can send the vibration force to every parts of the mould box synchronously to improve the durability of blocks/bricks. It adopts systematic design of machine, electricity, liquid and computer to meet the big table work.Requirement. The vibration force & frequency are adjustable according to different materials and craftwork procedures: low frequency-adding materials and high frequency-molding. 3. Control system: digital location sensor is used to make sure the accuracy of every operation. Plc photoelectric real-time control system can protect the equipment to work normally. It is high technology researched by ourselves including touch operation and patent oil pump protection. It is more durable. It is easy for the users to operate with the help of real-time prompt facility. 4. Autodiagnostics: real-time malfunction self-diagnosis facility can give an alarm of fault resolution timely. It is combined with the remote control system by telephone lines to make self-diagnosis. Framework dimension: 680*4, 150*2, 900 mm Weight: 11, 100 kg
Spare parts for cement production lines
Portland cement 42.5 Bulk clinker Ordinary portland cement ( bagged bulk bulk inside jumbo bags) 1-quantity : 30.000 mt +/- 10 % per shipment on a monthly basis 2-origin : china 3-loadinfg port : lanshan- londkou- qingdao china 4-packing : 50 kg bags ( kraft paper +p.P woven layer) inside sling bags 2 mt ( 40 bags each ) 5-payment method : by irrevocable , confirmed , non transferable l/c , paid 100 % at sight against submitting shipping Documents, confirmation might be through first class bank. 6-price :prices will be offered after receiving an official inquiry from the seller including discharge port , shipment schedule and discharge rates which is essential to quote the sea freight cost . In case of several shipments contract with the seller agrees the payment of 1 % of the total Value of the contracted quantities and parfico submits a bank guarantee for the same to the Client as an execution guarantee . 7-delivery : starting from january 2006 8-chemical and physical composition: Chemical composition Required parameterstest result 3.5 %2.8 %l.O.I 5.00 %3.01 %mgo 3.5 %2.56%so3 Physical composition Required parameterstest result 300 gm/m 385 gm/mfineness 45 min201 minfinal setting Passedpassedsoundness Compress strength 16.00 mpa31.23 days 42.50 mpa48.0028 days
Cement bag sack making machine equipment line
Cement opc 42. 5 & clinker Sell cement opc 42. 5 and clinker, pls contact us if you serous to buy! Pearl
Cement.
White portland cement, white cement clinker.
Portland Cement type l, ll and lll.
Portland cement.
High-aluminate cement CA50, Portland cement.
