Cement
Portland cement 50 kg bags, also jumbo bags
Cement
Portland Cement Opc 32.5 Opc 42.5 Opc 52.5 White cement Bagged or bulk Min lot is 12, 500 mt
Cement 42.5 r/n or 32.5r or 52.5r Bags or bulk
Cement
Cement We work directly with a 100% reliable ukraine/russia/usa/china. Supplier. Proven track record, selling over 2 m mt per month. Sabs certified available (conch) Cement:42.5 n/r All prices in usd, cif aswp, transferable lc , we also accept non-transferable Grades 32.5 Grades 52.5 Non-transferable lcs are accepted, price to be confirmed (+6 us$) Prices can sometimes be negotiated for the real buyer Agents can add a total of usd 1 to the price for commission . Packing: bulk or 50 kg bags in buyer's choice . Payment: irrevocable, confirmed, revolving letter of credit Standards: - us standard astm-c-150 - british standard 12/1997 - euro standard en 197/2000 - customer specified standard Packaging: Customers may elect bulk delivery of either cement or clinker in sealed compartments; every shipment is insured against contamination and loss. Stacked on pallet and shrink-wrapped or packed in jumbo bags for sea transport.
Cement Quality parameters Test physical properties43 gradeBis 8112 v 1989 Fineness Setting surface m2 / kg 290.0 225.0 Soundness Lechatlier method (mm) Auto clave (%) 0.5-1.0 0.1% (maximum) Not more than 10 Not more than 0.8 Setting time Initial minutes Final minutes 120-140 160-180 Not less than 30 Not more than 600 Compressive strength mpa 3 days 7 days 28 days 25.0 45.0 58.0 Chemical requirements Loss of ignition Insoluble residue Magnesium oxide Lime saturation factor Sulphuric anhydride Alkalies
Cement In bulk or 50 Kg Bags
32, 5, 42, 5 52, 5 opc portland cement per bs 50kg bags, sling bags and bulk
Fiber cement board Specification:1220*2440mm and 1220*4880mm.Other specification is also available Thickness:3.5-16mm Density: 1.3g/cm3 (Middle density) and 1.5g.Cm 3 (high density) Pallet
Cement 42, 5 r une/un/197/1 We need 12.500tm/week Cif aswp Loi or icpo bcl fco
Ordinary portland cement 42.5n Ordinary portland cement grade 42, 5n According to british standards 12/1996 or astm c-150 Chemical composition Silicon dioxide (sio2) 21.00 Aluminium oxide (a12o3) 5.30 Ferric oxide (fe2o3) 3.30 Calcium oxide (cao) 65.60 Magnesium oxide (mgo) 1.10 Sulphur trioxide (so3) 2.70 Loss of ignition (loi) 0.90 Tricalcium silicate (c3s) 60.00 Dicalcium silicate (c2s) 15.00 Tricalcium aluminate (c3a) 8.05 Tricalcium alumino ferrice (c4af) 9.76 Physical and mechanical properties Blain cm2/gr 3.250 Autoclave expantion 0.02 Initial setting time (vicat) 105 minutes Final setting time (vicat) 135 minutes Compressive strength @ 03 days 230 kg/cm2 and @ 07 days 305 kg/cm2 and @ 28 days 420 kg/cm2 Compressive strength mortar mpa (n/mmª): Strength class: 42, 5n Early strength: 2 days v 10.00 Standard 28 days strength: minimum 42, 5. Maximum 62, 5. Origin: russia, ukrania. Quantity: 100.000 mt- more 1.000.000mt Packing : 50 kg bags
Cement 42.5 Specification: ordinary grey portland cement 42.5 ren 197-1/2000 and british standards bs12/96 Ordinary portland cement Specification sheet Construction grade 42, 5 Colour grey Minimum standards to be met:according to british standards 12/1996 or Astm c-150 , en û 197 û 1/2000 Chemical composition Aluminium oxideal2o35.30 Calcium oxidecao65.60 Dicalcium silicatec2s15.00 Ferric oxidefe2o33.30 Loss of ignitionloi0.9 Magnesium oxidemgo1.10 Silicon dioxidesio221.00 Sulphur trioxideso32.70 Tricalcium aluminatec3a8.05 Tricalcium alumino ferricec4af9.76 Tricalcium silicatec3s60.00 Physical and mechanical roperties Blain cm2/gr3.250 Autoclave expansion0.02 Initial setting time (vicat)105 minutes Final setting time (vicat)135 minutes Compressive strength @ 3 days230kg/cm2 Compressive strength @ 7 days305kg/cm2 Compressive strength @ 28 days420kg/cm2 50 kgm bags
1) 42.5 r and 52.5 r, 2) quantity : 210, 000 mt x 12 (50% 42.5 r and 50% 52.5 r) 1) air-tied bags 2) 1.5 to 2 mt/bag Buyer will provide 60, 000 mt ship for picking up order Payment: l/c 100% at sight Origin: sellers choice, as long as our price and quality can match above specs.
Portland cement Cement: 450,425,525, Bss12-1978, PZ 35E, or 400 price US$ 30/MT, C&F DOUALA/CAMEROON, quantity 15,000 tos.packing bag of 50 kg, 3x2 folds. Prayer to send the physical and chemical specifications to us cement. 50 kg bag, of jute
A cement is a binder, a substance used for construction that sets, hardens, and adheres to other materials to bind them together. Cement is seldom used on its own, but rather to bind sand and gravel (aggregate) together. Cement mixed with fine aggregate produces mortar for masonry, or with sand and gravel, produces concrete. Cement is the most widely used material in existence and is only behind water as the planet's most-consumed resource. Cements used in construction are usually inorganic, often lime or calcium silicate based, and can be characterized as either hydraulic or non-hydraulic, depending on the ability of the cement to set in the presence of water (see hydraulic and non-hydraulic lime plaster). Non-hydraulic cement does not set in wet conditions or under water. Rather, it sets as it dries and reacts with carbon dioxide in the air. It is resistant to attack by chemicals after setting. Hydraulic cements (e.g., Portland cement) set and become adhesive due to a chemical reaction between the dry ingredients and water. The chemical reaction results in mineral hydrates that are not very water-soluble and so are quite durable in water and safe from chemical attack. This allows setting in wet conditions or under water and further protects the hardened material from chemical attack. The chemical process for hydraulic cement found by ancient Romans used volcanic ash (pozzolana) with added lime (calcium oxide). Portland cement is by far the most common type of cement in general use around the world. This cement is made by heating limestone (calcium carbonate) with other materials (such as clay) to 1450 �°C in a kiln, in a process known as calcination that liberates a molecule of carbon dioxide from the calcium carbonate to form calcium oxide, or quicklimeâ??which then chemically combines with the other materials in the mix to form calcium silicates and other cementitious compounds. The resulting hard substance, called 'clinker', is then ground with a small amount of gypsum into a powder to make ordinary Portland cement, the most commonly used type of cement (often referred to as OPC). Portland cement is a basic ingredient of concrete, mortar, and most non-specialty grout. The most common use for Portland cement is to make concrete. Concrete is a composite material made of aggregate (gravel and sand), cement, and water. As a construction material, concrete can be cast in almost any shape, and once it hardens, can be a structural (load bearing) element. Portland cement may be grey or white.
We have fine cement type 1 and type 2 ready to ship.
We supply the Required Grade and Type of Cement that have been procured from the Top Brands and made available to the customers at the required Specification for the best prices in the Bulk quantities required. It is obvious that Cement is a very useful binding substance in construction. The usage of cement in diverse fields of construction has made it a very significant civil engineering material. Cement mixed with water and fine aggregate produces mortar, sand, and gravel to create concrete. It is the most-consumed resource and is widely available in the market. Thanks to our more than 7 years of experience, we have developed a wide range of products sourced from the most experienced manufacturers in Asia and in general.
Cement
