Kam super capacitors have some performance : 1.Small-size, large capacity, excellent voltage holding. 2, unlike battery, unlimited charge/discharge cycle. 3.Wider temperture range. 4.Ideal for backing up of cmo's.Microcomputers, ram's and the like used in vcr's tuners, tv sets, telephone setsand other. 5.Serial structure, two cell with same characteristics. 6.Low esr, high energy density. 7.The capacity range is from 0.1f-3000f, and the operating voltage of capacitors range from 2.5v-5.5v.
Rated voltage range: 160v-450 v Temperature range: -25-105 degree Capacitance : 1-100 uf Load life: 3000h, 5000h, 8000h, 12000h/ Carton package
Rated voltage : 160v-450 v Temperature range: -25 - 105 degree Capacitance : 1-100 uf Load life: 3000h, 5000h, 8000h, 12000h
Chip ceramic capacitors 0603, 0805, 1206, 1210
The sf6 gas insulated standard capacitor is used together with a c and tan delta measuring bridge as the comparison standard leg of the bridge. It is used as capacitance standard in measuring bridge circuits to measure the dielectric dissipation factor tan-delta, further-more, it can be used as high-voltage capacitor for voltage divider circuits of high-voltage transformer test. Highest long-term stability is guaranteed and proven over 20 years. A wide range of different sizes, values and voltage ranges are available. We can produce 5kv~1600kv. We can also provide the professional solutions and equipments for: withstanding voltage testing, c & tan-delta (power factor) testing, partial discharge (pd) testing and impulse voltage testing.
0.1k/275v P:10mm 18x12x6 . 500pcs/bag or 10k/carton.
Technique Data of Motor Run Capacitor: Climate Type:40/70/21; 25/85/21 Rated Voltage:250-660VAC Rated Capacitance:250VAC: 1-120 uF 450VAC: 1-100 uF. Tolerance:í+5% Testing Voltage:T-T:2.0íñUn, 2S no breakdown T-C:2500VAC, 10S no breakdown Insulation Resistance:T-T:í¦3000Mª+íñuF T-C:í¦1000Mª+ Loss Tangent:tgª-í_0.001 (100Hz) Safety ClassP0,P2 Round and square type are available. Look forward to your inquiry. Standart export package.
Class x1 and x2 capacitor.
Ca42 series solid dipped tantalum capacitors are sinter-anode, epoxy-coated and are encapsulated with flame-retardant yellow epoxy powder. These series products are good to use for high stable performance, low current leakage and low dissipation factor, also for stable frequency, stable temperature and long life. The products are widely used in home electronic appliances, computer, telecommunication, military equipments and other electronic products. They meet and exceed the requirements of iec specification 384-15-3 and gb7215-87 standard.
Ca series metal-cased solid tantalum electrolytic capacitors with polar axial leads are characterized in small size, wide operating temperature range, stable performance, high reliability and long life. Ca series meets the standard gb8583-88, and it is widely used in instruments meters and other electronic equipment for military and civil applications.
Gca411 series radial solid electrolyte tantalum capacitors are fully sealed and metal coating sealed with polar radial leads. The series capacitors are characterized by small size, low dc leakage and dissipation factor, stable performances and high reliability. Gca411 series meets the standard qj/pwv9-2000 and it is widely used in dc or pulse circuits of communication equipments and some other testing equipments.
Ca30 series wet electrolyte tantalum capacitors are half-sealed with polar axial leads. The series capacitors are characterized by small size, low dc leakage, stable performances, high reliability and long life. Ca30 series meets the standard qj/pwv139-2003 and they are widely used in military equipments, aerospace and other electronic products.
Ca45 series solid smd tantalum capacitors are sinter-anode and molded with small sizes while high capacitance, reliability and excellent operation performances. The series capacitor is designed and manufactured to meet the growing demand for surface mount technology. There are p, a, b, c, d, e six case codes available for choice. Comparing with dipped tantalum capacitor, they have lower esr. The products are widely used in telecommunications, computer, military equipments and other electronic products. They meet the requirements of eia 535baac. Tape & reel
Chip tantalum capacitors Solid tantalum chip capacitors are designed and manufactured with the demanding requirements of surface mount technology in mind. There are a, b, c, d, e, s six case codes. They have lower esr comparing with the dipped tantalum capacitors. The product is compatible with automatic pick and place equipment. Suitable for military equipment and computer fceil telephone and other electronic products.
Multilayer ceramic capacitors Wide capacitance, temperature , voltage and tolerance range; industry sizes; tape and reel available for auto placement; a lot of leads type available.
Ceramic capacitors The choice of dielectric is largely determined by the temperature stability required: Npo (cog) ultra stable classdielectric, with negligible dependence of electrical properties on temperature, voltage, frequency and time, used in circuits requiring stable performance. X7r stable class =dielectric, with predictable change of properties with temperature, voltage, frequency and time. Used 5 uas blocking, coupling, by-passing and frequency discriminating elements. This dielectric is ferroelectric and offers higher capacitance ranges than class. Y5v(z5u) general purpose class =dielectric with highest dielectric constant and greater variation of properties with temperature and test conditions. Very high capacitance per unit volume and suited for application as well as filtering,
Rvs-chip type, standard, 85 f, 2000 hours Rvk-chip type, low-leakage, 105f, 2000hours Rvw-chip type, wide temperature, 105f, 2000hours Rvt-chip type, wide temperature, 105f, 1000hours Rve-chip type, lower impedance, 105f, 1000hours Rvh-chip type, wide temperature, 125f, 1000hours Rvn-chip type, bipolar, 105f, 2000hours.
Dipped tantalum capacitors Small units with high stable performance, lower current leakage and dissipation factor, stable frequency and temperature and long life. Suitable for military equipment and computer f=telephone and other electronic products. Meets iec384-15-3 and gb7215-87 standard.
1) Small in dimension, light in weight, low dissipation factor 2) Good self-healing ability, long lifespan. 3) High insulation resistance, safety and stable. 4) It adopts safe anti-explosion net as its dielectric layer. It is widely applied to fluorescent lamps and halogen lamps; also it is ideally energy-saving. 1) Temperature Resistance: -40oC ~ +85oC 2) Rated Voltage: 250VAC-630VAC (50/60Hz) 3) Capacitance Range: 4uF~ 60uF 4) Capacitance Tolerance: í+5% ~ í+10% 5) Dissipation Factor: í_0.002 6) Testing voltage: between leading-out 1.75UR, 10S no breakdown Between leading-out end and shell: 2,200V AC, 10S no breakdown Insulation resistance: T-Tí¦3,000Mn.UF T-C í¦1,000Mn Specifications: can be supplied according to customers needs.
Elecsoud offer many kinds for film capacitors. We offer polyester film capacitors and popypropylene film capacitor. Radial and axial type. Below is our series. And we can offer speedy deliver with competitive prices: Cl11 polyester film capacitor Cl20 metallized polyester film capacitor-axial Cl21 metallized polyester film capacitor Cl21x miniaturized metallized polyester film capacitor Cl62 metallized polyester film capacitor for ac use Cbb13 polypropylene film capacitor Cbb20 axial-type metallized popypropylene film capacitor Cbb21 metallized polypropylene film capacitor Cbb62 metallized polypropylene film capacitor for ac use Cbb81 high-voltage metallized polypropylene film capacitor Metallized polyproplene film capacitor x2
