Bisphenol-a propoxylates
Radio,V-Chip,Snap-in,Lug,Screw carton,pallet
Capacitor Multiple choice
Features: 1) Stringent dimensional tolerance allows highly reliable and high speed Automatic chip placement on PCBs 2) Terminations are plated with Ni and solder 3) High insulation resistance and high reliability 4) Used for electronic equipment 5) A variety of models including 0402, 0603, 0805 and 1206 are available 6) Use dielectric materials of COG, Y5V and X7R COG (NPO) is the most popular formulation of the "temperature-compensation" capacitor according to EIA. It is class I dielectric materials. COG (NPO) ceramics offer very stable capacitor dielectrics. And temperature coefficient is within 0+/- 30ppm/C. Typical capacitance change with frequency and voltage is negligible at less than +/-0.05%. COG (NPO) formulations show no aging characteristics
Aluminum electrolytic capacitors 1) wide temperature and voltage range 2) capacitance range (uf): -10% ~ 20% 3) high stability 4) small capacitance change 5) low dissipation factor, low leakage current
Multilayer ceramic chip capacitors Dielectric type - the choice of dielectric is largely determined by the temperature stability required: Npo: ultra stable class i dielectric, with predictable change of electrical properties on temperature, voltage, frequency and time. Used in circuits requiring stable performance. X7r: stable class ii dielectric, with predictable change of preperties with temperature, voltage, frequency and time. Used as blocking, coupling, by-passing and frequency discriminating elements. This dielectric is ferroelectric and offers higher capacitance ranges than class i. Y5v: general purpose class ii dielectric with highest dielectric constant and greater variation of properties with (z5u) temperature and test conditions. Very high capacitance per unit volume and suited for bypass and coupling application as well as filtering, transient supression blocking, and charge storage application.
Wide capacitance, voltage and tolerance range Industry standard sizes Tape and reel available for auto placement Various lead spacing available
Ac motor capacitor We manufature various kind of motor capacitor which is used for starting and running of the motors.The product is equipped inside with reliable explosion-proof equipment.With its good self-healing characteristic and long life-span.We also can produce according to customers'special requirements.
Aluminum electrolytic capacitor ( rohs ) Aluminum Electrolytic Capacitor---Axial type: 85'C, 105'C, 1000 hours, 2000 hours, Non-polar, Low Leakage etc. Aluminum Electrolytic Capacitor--- SMD type: 85'C, 105'C, Non-Polarized, 5000 hours,Super Low Impedance, Long Life Assurance etc. Aluminum Electrolytic Capacitor---Radial type: 85'C, 105'C, Mini size, Non-Polar, 2000hours, 3000hours, 5000 hours, Low leakage current, Low Impedance, high Ripple current etc. Aluminum Electrolytic Capacitor---Snap in type: 85'C 105'C, 5000 hours etc. Aluminum Electrolytic Capacitor---Screw type: 85'C, 105'C, Long life etc. Aluminum Electrolytic Capacitor---Lug type: 85'C, Long life.
Ceramic Capacitors TS15 Ceramic Disc Capacitor -50V, 500V ff TS16 High Voltage Ceramic Capacitor ---1KV, 2KV, 3KV, max 35KV.ff TS17 Multilayer (Mono) Ceramic Capacitor --Radial & Axial ff TS18 Multilayer Ceramic Chip Capacitor - SMD, 50V, 0603,0805,1206 etc. ff TS18H High Voltage Multilayer Ceramic Chip Capacitor - SMD, 100V, 250V, 500V,1KV, max 4KV, 0603, 0805, 1206, 1210, 1812, 1808, 2220 etc. TS22 Safety Standard Reconized Capacitor - Y Capacitor, 250VAC, 400VAC.
polyester capacitor Polyester Film Capacitor Metallized Polyester Film Capacitor Mini Box Metallized Polyester Film Capacitor X2 capacitor - --280VAC, UL, VDE Approved. Polystyrene Film Capacitor - Axial & Radial Axial Metallized Polyester Film Capacitor Axial Metallized Polypropylene Film Capacitor Stacked SMD Metallized Polyethylene Naphtalate Film Capacitor Stacked SMD Metallized Polyhenylene Sulfide Film Capacitor Metallized Polyester Film Capacitor - Stacked
Ceramic Capacitors TS15 Ceramic Disc Capacitor -50V, 500V ff TS16 High Voltage Ceramic Capacitor ---1KV, 2KV, 3KV, max 35KV.ff TS17 Multilayer (Mono) Ceramic Capacitor --Radial & Axial ff TS18 Multilayer Ceramic Chip Capacitor - SMD, 50V, 0603,0805,1206 etc. ff TS18H High Voltage Multilayer Ceramic Chip Capacitor - SMD, 100V, 250V, 500V,1KV, max 4KV, 0603, 0805, 1206, 1210, 1812, 1808, 2220 etc. TS22 Safety Standard Reconized Capacitor - Y Capacitor, 250VAC, 400VAC
Tantalum capacitor Resin coated, inflammable & moisture resistant epoxy powder Temperature range: -55'c to +85'c Capacitance:0.1uf to 330uf Capacitance tolerance: +/-10%, +/-20% Rated voltage: dc3v to 50v Standard lead spacing:2.54mm-5.08mm Case size d(max) l(max) s(+-0.5mm)d(+-0.5mm) A 4.5 7.0 2.5 0.5 B 5.0 8.0 2.5 0.5 C 5.5 9.5 2.5 0.5 D 6.5 11.0 2.5 0.5 E 8.5 13.0 5.0 0.5 F 9.5 16.5 5.0 0.5
Capacitor Cds Feature: 105¦ 1000h Low loss and nonpolar Application: Level emphasizer circuit of tv sets Cdsa Features: 105¦ 1000h low loss and nonpolar Application: frequency division of sound Item characteristic parameter Cds cdsa Rated operating voltage 50vdc 50, 100vdc Rated operating temperature -40~+105¦ Capacitance tolerance +20% +20-10 Leakage current I_0.04crur+ ora¼bigger value preferred, bi-directional, 2 minutes reading Loss tangent tano _0.05 (20¦, 100/120hz) _0.10 (20¦, 100/120hz) Low temperature characteristics Impedance ratio shall not exceed the below-listed values under 100hz or 120hz. Z-40¦/z+20¦_4 High temperature storage characteristics Capacitance change _+20% of initial value, tano _ 1.2 times of specified value, leakage current_ 2 times of specified value, and impedance_2 times of specified value after the recovery of capacitor preceded by 500 hours store under the temperature of +105¦ Durability capacitance change _ +20% of initial value, tano _1.5 times of specified value, leakage current _ specified value and impedance_2 times of specified value after the recovery of capacitor preceded by 1000 hours operation under the temperature of +105¦ and the rated operating voltage with rated ripple current (direction alternation every 250 hours) Other according to gb2693-90 and gb5993-90
Capacitors Solid tantalum chip capacitors designed and manufactured with the demanding requirements of surface mount technology.There are a, b, c, d, e, s six case codes. They have lower esr compared with the dipped tantalum capacitors. The product compatible with automatic pick and place equipment. Suitable for military equipment and computer, telephone and other electronic products. Meets the requirements of eia 535baac and qc300801, q / yhc. 45-01 standard. General characteristics 1. Operating temperature: -55c ~ 125c (above 85c, use dreaded voltage) . 2. Capacitance tolerance: / -20% , / -10% . 3. Capacitance range: 0. 1uf~330uf. 4. Voltage rating: 4v~50v. 5. Reliability: 2% per 1000h at 85c with 0. 1 series impedance 60% confidence level.
Suitable for military equipment and computer, telephone and other electronic products. Features: 1) Small units with high stable performance 2) Lower current leakage and dissipation factor 3) Stable frequency and temperature and long life 4) Meet IEC384-15-3 and GB7215-87 standard 5) Operating temperature: -55 - 125fpC 6) Capacitance tolerance: f+20%, f+10%, f+5% (special order) 7) Capacitance range: 0.1 - 330»F 8) Voltage range: 4 - 50V
We offer a full range of film/foil and metallized polyester and polypropylene film capacitors. They are available in a full array of axial and radial leaded case styles and are backed by complete specifications and current ratings for all types and excellent capacitance stability.
Capacitor Standard
Mica capacitors Capacitance range: 1pf - 22, 000pf Tolerance:+/-0.5pf, +/-1%, +/-2%, +/-5% ~ +/-20% Rated voltage: dc 50v, 100v, 300v, 500v Operating temperature: -55'c ~ 125'c Insulation resistance: For c
Polyester film capacitor F e a t u r e s 1.Good reputation in use with consumer & industrial electronics. 2.Optimum for automatic insertion due to their small size and light weight. 3.Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance., Specs: Operating temperature -40¦ to + 85¦ Rated voltage dc 100v, 250v, 400v, 630v, 1000v Capacitance range 0.01 to 0.47µf Capacitance tolerance +/-5%, +/-10%, +/-20% Insulation resistance 30, 000 mΩ min Dissipation factor
