Find Verified Synthetic Leather Suppliers, Manufacturers and Wholesalers

Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

Name: Leather Jacket Fish / Unicorn Fish Scientific Name: Aluterus Monoceros Origin: India Presentation: Whole Round, HGT, Fillets India Origin: Whole Round, HGT Sizes: 100-200, 200-300, 300-500, 500-700, 700-1000, 1000 grams up Season: August to April Freezing Methods: IQF Packing: Packed in cartons Fillet Sizes: 4-6, 6-8, 8-10, 10-12, 12-16 oz Season: August to April Freezing Methods: IQF Packing: Packed in cartons

Diphenylmethane diisocyanate, or "MDI" for short, is a white to pale yellow molten solid, containing 4,4 '-diphenylmethane diisocyanate, 2,4' -diphenylmethane diisocyanate, 2,2 '-diphenylmethane diisocyanate, and other isomers. Is the aromatics downstream main products, widely used in polyurethane elastomers, synthetic fiber, artificial leather, solvent-free coatings and other polyurethane materials production field.

Hot sale Toluene Dissocyanate/TDI Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000 Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives. It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.

wet salted cow hides 80% machine flayed, 20% hand flayed no grubs, no holes, no cuts, no heads short shanks weight: min. 30 kgs average weight: 34 to 36 kgs selection: 70% a, 30% b 1 x container = 1200 hides approx. wet salted kip skins 70% machine flayed, 30% hand flayed weight: 16 to 20 kgs average weight: approx. 18 kgs selection: 60% a, 40% b 1 x container = 1250 skins approx. wet salted cow hides 100% machine flayed 70% male, 30% female 0 to 1 hole, 5% small humps a few ticks but low possibility due to good tics prevention programs weight: min. 22 to 35 kgs average weight: 26 kgs approx average size: 42 sq.ft. selection: 90% a, 10% b 1 x 20ft container = approx. 1300 hides wet salted ox/heifer hides machine flayed weight: 17 to 26 kgs average weight: approx. 23 kgs selection: 80% a, 20% b one container = approx. 1500 hides

Hot Selling 100% Sawdust Biomass Wood Pellets Available for Export Descriptions: Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The sawdust or wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside Economic efficiency: Wood pellets are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distances. Electricity generated from pellets in converted coal plants is almost the same cost as electricity generated from natural gas, diesel. Environmentally friendly: Wood pellets are a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also bring additional environmental and social benefits. Using scopes: Biomass fuels replace fossil fuels in power plants, stoves, the boiler of textile, food, leather, animal feeding, dye industrial, and animal bedding.

Kiln Dried split firewood: 1. Descriptions: Kiln dried split firewood is a renewable resource, fuel that is already widely available in the world nowadays. The wood log is been split into smaller quantities. This is a hot process and the natural ligin in the wood shavings melts and binds the dust together, holding the wood in shape and giving it that characteristic seen on the outside. 2. Economic efficiency: Kiln dried split firewood are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distance. Electricity generated from kiln dried split firewood in converted coal plants is almost the same cost as electricity generated from natural gas, diesels. 3. Environmentally friendly: Kiln dried split firewood is a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also brings additional environmental and social benefits. 4. Using scopes: Dried kiln split firewood replaces fossil fuels in power plants, stoves, boiler of textile, food, leather, animal feeding, dye industrials and animal bedding.

1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases. 2. Specification: Q/SHG19-2008ItemIndex Product: LM200 Apparent: White solid colloidal micro-particle Specific surface area m2/g: 150�±15 PH value3.6~4.3 Heating loss weight % (m/m) â?¤1.0 Burning loss weight % (m/m) â?¤1.0 Apparent density g/Lâ?¤60 3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber. LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink. LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component. LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc. 4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content. 5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.

Titanium (II) Sulfate is used as a Mordant, Catalyst, Reductant, Fading agent for dyes, Surface conditioning agent of phosphatisation in coating industry. It can be used for hydrothermally-grown synthetic nano titanium dioxide. Its used in the preparation of high purity Inorganic titanium salt, containing titanium inorganic polymer flocculant and Titanium Tanning Agent in leather industry. Sales Specification Appearance: Purple liquid Ti2(SO4)3: 15-20% H2SO4: 25% Max Density: 1.32-1.34 Ti: 4.2% Min Fe: 0.05% Max Packing 250Kg plastic blue drum DOT Transportation UN/NA: 3264 Proper Shipping Name: Corrosive Liquid, Acidic, Inorganic, N.O.S (Titanium Sulfate/ Sulfuric Acid) Hazard Class: 8 Packing Group: II