Socket Plain Fig
Y Way Fitting
Stainless Steel Butt Weld Fittings
CPU Scrap
HONEY consist of mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminumbronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Different composition proportions are the first difference. Yellow brass is composed of about 60% or 70% copper; 30%-40% zinc, and trace amounts of tin and zinc. While red brass contains approximately 85% copper and 15% zinc, with very little tin and lead input properties name Brass honey scra category Brass honey melting point 905-932 ensile Strength, Ultimate 345 MPa ensile Strength, Yield 135 MPa use copper extraction, recycle
Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.
Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.
We are one of the leading exporters of Aluminum scraps such as Stainless Steel Scraps and we are looking for serious buyers who in need contact us. We have been in business for many years Stainless Steel Scraps 304Scrap Material: SS201,SS304,SS316Factories direct materialGrand: 1stWe supply Stainless Steel Scraps of 201,304,316 etcStainless Steel:Grade 304Grade 310Grade 316400 SeriesClean Grade 'A' 304 Stainless Steel Scrap with no attachments.Commodity: 304 Stainless Steel ScrapDescription of commodity: 304 Stainless Steel ScrapSpecificationNickel------------8% to 10%Chromium---------10% to 17%C---------------- 0.08%MN-------------- 2%SI-------------- 1%P--------------- 0.045%S--------------- 0.03% High quality stainless steel scrap 201,304,430 and 316 in stock factory price stainless steel scrap SS304 and 316 Specification
We are manufacturing, distributing and trading a comprehensive range of 99.9% Copper Honey Brass Scrap that conforms to international quality standard norms. We are the right choice for obtaining superior quality brass Scraps. Copper Scraps that we supply are on massive demand owing to their usage in fabrication of utensils, copper wires, alloys for different industries etc. apart others. Highly ductile and superior performance distinguishes them from other variants available in the markets. Quick Details : Place of Origin: Germany/Poland /Spain Brand Name: Brass Model Number: 99.9% Copper honey brass Scrap Type: Brass Honey Copper Content: 99.99% Supply Ability Different types of brass scraps that are used for recycling or for recovering pure brass, include - brass electrical parts, brass sanitary, brass pneumatic parts. TEST RESULT : Copper: 99.9% Carbon: 0.03% Phosphorus: 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003% Scrap Contains -Cables -Scrap Motor Winding wires -Bus Bar Strips, etc Used As A Raw Material In - Copper Wire Drawing Units - Foundries - Copper Utensils Manufacturing Units - Automobile Industries.
Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
CAS : 7704-34-9 HS Code : 28020000 Packing : 25kg/Bag Application Sulfur alias sulfur, colloidal sulfur, sulfur block. The appearance is light yellow brittle crystal or powder, with special odor. The molecular weight is 32.06, the vapor pressure is 0.13kPa, the flash point is 207â??, the melting point is 119â??, the boiling point is 444.6â??, and the relative density (water =1) is 2.0. Sulfur is insoluble in water, slightly soluble in ethanol, ether, easily soluble in carbon disulfide. As a flammable solid, sulfur is mainly used in the manufacture of dyes, pesticides, matches, gunpowder, rubber, rayon and so on. Sulfur is an important variety of inorganic pesticides. The product is yellow solid or powder, with obvious odor and can be volatilized. Sulfur water suspension is slightly acidic, insoluble in water, and reacts with alkali to form polysulfide. Sulfur burns with a cyan flame and produces sulfur dioxide gas. In production, sulfur is often processed into colloidal suspension for the prevention and control of pests and diseases, which is safe for people and animals and is not easy to cause drug damage to crops.
Aluminium Ingot
Product Description Specification: Density: 2.702g/cm�³ Melting point: 660.37�ºC Boiling point: 2467.0�ºC Color: silver white Application: 1. Mainly used for melting ingot. 2. Used for industry such as automobile, pinning and weaving, electron broadly and so on. 3. Used to make cars, trains, subways, ships, airplanes, rockets, spaceships and other land and air vehicles to reduce the weight of the load. Detailed Photos
Applications: 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap Aluminum block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc. Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Features: Free from Nuts, Steel plate, paint Chemical Composition: AL Appearance: Silvery White
High purity copper ingot is a very special metal for us, as our activities encompass all aspects of the copper business, ranging from mining through smelting to fabricating. Hereunder, we will examine our achievements in the purification of copper as an example of our purification research. The tables below show analytical results of impurities in the worldâ??s purest copper (6N: 99.9999%Cu). This analysis was conducted by Glow-Discharge Mass Spectrometry (GDMS), which allows microanalysis of all elements. The result indicates the ultra-purity of the copper, proving that the quantities of all elements other than copper are below the detection limit. It is well known that ultra-high-purity metals possess very unique natures sharply different from those of ordinary metals. High purity copper ingot as adding elements can be directly applied in aviation, space atomic industrial super alloy, and the development of new alloy, as well as the analysis of the standard sample. It can also be through mechanical processing preparation into high purity copper foil shielding materials for atomic reactor.
Product Description Material 99.9%pure copper Diameter 10-500 mm�² Life â?¥50 years Tensile Strength â?¥396 mpa Characters Easy installation ,Good conductivity Available service mode OEM,ODM Certificate ISO9001:2015 Regular Products size(We Accept Customization) Negotiable price According to different material/sizeand and Purchase quantity Product specifications Nos/Dia (pcs/mm) Outer Dia (mm) Weight
We supply Scrap Aluminium products including: Aluminum Wire Scrap,Aluminium scrap 6063 Aluminum scrap UBC(Used Beverage Cans) Aluminum wheel scrap Aluminum tense and tabor Aluminum content 99.7% -Aluminium wire scrap -Reasonable price and high purity -Timely delivery and promptly shipping -Fire deals Aluminium scrap 6063 Aluminium profile scrap 6063 Aluminum content 75%, 95%, 99.7% Aluminium content 75%, 95% 99.7% or can satisfy the demands of the customer
Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%. Chemical Composition: C:0.06 â?? 0.082% Mn:0.75 â?? 1.05% SI:0.13 â?? 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
Applications 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc. Our advantage: 1. We offer the most competitive prices. 2. We provide relevant professional product consulting. 3. We are willing to help customers find any potential products and merchandise. 4. You can visit our factory by yourself. Our success is inseparable from your support and making friends from all over the world in good faith. 5. Our aim is: integrity first; reputation first, best reputation; once cooperation, friends for a lifetime. For more information about our product, please feel free to contact us.
