Lamination Films are basically three-layer coextruded Polyethylene Lamination Films for various types of Laminate structures for food and non-food applications. Lamination PE Film Constructed from a clear blend of high clarity LDPE and LLDPE, these films are ideal for use as a sealant web due to their enhanced clarity, We Also Manufacture PE Lamination Film in Colors seal response and physical strength.
It is used widely as an industrial intermediate to manufacture polyethylene terephthalate (PET) and dioctyl terephthalate (OECD, 2001). It is used in the Polyester Film (Audio/Video Tape, X-ray Film, Photo Film), Polyester Fiber, Pet Bottle, Polyester Adhesive, Engineering Plastics. DMT is volatile, it is an intermediate in some schemes for the recycling of PET.
Aptamil Sensavia 1 Ready Made 70ml x 6 Breastmilk substitute with milk protein broken into smaller pieces Ready to feed UHT sterilized. Aptamil Sensavia 1 Ready Made 70ml tailores Formulation from Birth. Sterilized â??ready to feed with no preparation required.
Size: 1220*2440mm, 1250*2500 or Customizable Thickness: 6/9/12/15mm/18/21 Core: Poplar Film: Brown,Black,Red Glue:Phenolic,Melamine Packaging Details: Standard Exporting Pallet packing Delivery Time: 15-20days
Size: 1220*2440mm, 1250*2500 or Customizable Thickness: 6/9/12/15mm/18/21 Core: Eucalyptus Film: Brown,Black,Red Glue:Phenolic,WBP Packaging Details: Standard Exporting Pallet packing Delivery Time: 15-20days Certification: FSC /CE/EUTR/CARB
Size: 1220*2440mm, 1250*2500 or Customizable Thickness: 6/9/12/15mm/18/21 Core:FINGER JOINT Film: Brown,Black,Red Glue:Phenolic,Melamine Packaging Details: Standard Exporting Pallet packing Delivery Time: 15-20days
Product Introduction: Polyethylene terephthalate (PET), with the chemical formula (C10H8O4) n, is synthesized by exchanging dimethyl terephthalate with ethylene glycol ester or esterification of terephthalic acid with ethylene glycol, followed by condensation reaction to obtain dihydroxyethyl terephthalate. Belonging to crystalline saturated polyester, it is a milky white or light yellow, highly crystalline polymer with a smooth and glossy surface. It is a common resin in daily life and can be divided into APET, RPET, and PETG. It has excellent physical and mechanical properties over a wide temperature range, with a usage temperature of up to 120. Its electrical insulation is excellent, and even at high temperatures and frequencies, its electrical performance is still good. However, it has poor corona resistance, creep resistance, fatigue resistance, friction resistance, and dimensional stability. Product advantages: 1. It has good mechanical properties, with an impact strength 3-5 times that of other films, and good bending resistance. 2. Oil resistant, fat resistant, acid and alkali resistant, and resistant to most solvents. 3. It can be used for a long time in the temperature range of 55-60, and can withstand high temperatures of 65 and low temperatures of -70 for short-term use. Moreover, its mechanical properties are minimally affected by high and low temperatures. 4. Gas and water vapor have low permeability and excellent resistance to gas, water, oil, and odor. 5. High transparency, can block ultraviolet rays, and has good gloss. 6. It is non-toxic, odorless, and has good hygiene and safety, and can be directly used for food packaging. Product application: The main applications in the field of electronic appliances include: electrical sockets, electronic connectors, rice cooker handles, TV yokes, terminal blocks, circuit breaker casings, switches, motor fan casings, instrument mechanical parts, cash counting machine parts, electric irons, and accessories for electromagnetic stoves and ovens; Flow control valves, carburetor covers, window controllers, foot transmissions, and distribution panel covers in the automotive industry; Machinery industry gears, blades, pulley, pump parts, wheelchair body and wheels, lampshade shell, illuminator shell, drain pipe connector, zipper, clock parts, spray parts. It can be spun into polyester fiber, also known as polyester. Can be made into thin films for use as substrates, insulation films, product packaging, etc. for recording, recording, and film production. As plastic, it can be blown into various bottles, such as cola bottles, mineral water bottles, etc. Can be used as electrical components, bearings, gears, etc.
PRODUCT DETAILS Size 1220*2440mm(4â??*8â?²),900*2100mm ,1250*2500mm or upon request Thickness 9mm ,12mm ,15mm,18mm ,21mm ,24mm or upon request Thickness Tolerance +/-0.5mm Face/Back Dynea dark brown film,black film,brown film,Anti Slip film ,plastic film Core Board Poplar, Eucalyptus, Combi, Birch or upon request Glue Phenolic ,WBP,MR Grade One Time Hot press / Two Time hot press / Finger-Joint Features 1.Transference to concrete is set up very easily 2.Waterproof, Wear-resistant, anti-cracking 3.Environmentally friendly Service Strict Quality Control System, One to one order following service
- Size: 50 x 50 x 200mm or 65 x 65 x 200mm - Moisture: 4.8% - Ash: < 2% - Calorific: 4700 kcal/kg - Nitrogen: 0.011%, Sulfur: 0.006% - Packing: 10kgs/block, 960kgs/pallets, 24 pallets/cont 20 feet. - Delivery term: 15 days from receiving deposit
The major use of ethylene glycol is as an antifreeze agent in the coolant in for example, automobiles and air-conditioning systems that either place the chiller or air handlers outside or must cool below the freezing temperature of water. In the plastic industry, ethylene glycol is an important precursor to polyester fibers and resins. Ethylene glycol is used in the natural gas industry to remove water vapor from natural gas before further processing. Minor uses of ethylene glycol include the manufacture of capacitors, as a chemical intermediate in the manufacture of 1,4-dioxane, as an additive to prevent corrosion in liquid cooling systems for personal computers, and inside the lens devices of cathode-ray tube type of rear projection televisions. Sales Specs Appearance: Colourless Liquid Purity: 99.1% Min Diethylene Glycol: 0.6% Max Acidity: 20 PPM Max Water: 0.3% Max Color (Pt-Co): 10 Max Iron: 1 PPM Max Packing 507.80 LB drum, 4 drums per pallet 2204.60 LB tote
- Material: Pine, rubber, acacia - Size: 1-3mm - Moisture: max12 % - Packing: (55 x 35 x 20)cm, 550-650kg/jumbo bag, 24-25tons/40HC Capacity: 2,000MT/month
Nestle NAN SUPREMEpro 1, Suitable from Birth Premium Starter Infant Formula Powder Sachets - 4 x 17g
Nestle NAN SUPREMEpro 3, Premium Toddler 1+ Years Milk Drink Powder Sachets - 4 x 32g
- Material: pine, rubber, acacia - Size: 15.2 x 6.2 x 9.2cm or 18.7 x 7.7 x 11.1 cm - Avaporate: 83.55% - Moisture: 7.5 % - Ash: 0.83 % - Calorie: 4683 kcal/ kg - Sulphur: 0.0176 % Packing: 12 pcs/10 kg/ PE bag, 96 Bag/Pallet, 24 Pallets/ 20' DC
Our team applies the latest technology in product manufacturing and supply. We can provide top-quality dunnage bag products to clients based on their requirements. Reusable packing material Dunnage bags are reusable packing materials. It takes no time to inflate and deflate them depending on the requirements. Follow the proper handling procedures that enhance the product's durability for the future. It can save your cost and effort too. Easy-to-use dunnage bags Dunnage bags are designed in such a way that makes them easy and convenient to use. Packing fragile items and sending them for transportation becomes super easy and stress-free while using dunnage bags. These bags can be inflated and deflated within a few minutes. It allows the efficient loading and unloading of items. Kraft Paper Dunnage bag: 90 x 180 cm (900 x 1800 mm) 90 x 210 cm (900 x2100 mm) PP Woven Dunnage bag: 90 X 120 Cm (900 x 1200 mm) 90 x 150 cm (900 x 1500 mm) 90 x180 cm (900 x 1800 mm) 90 x 210 cm (900 x 2100 mm)
Well Clean, washed & fresh, outer hard nail on, without bad smell Black spots maximum 3% black pad or ammonia burns Broken bones maximum 5% Moisture less than 3% Processing 100% Fresh and Frozen Well Dressed and cleaned No bruises No excessive Blood No bad smell No feather No Broken bones Moisture less than 3% Frozen Requirement :- Blast Frozen at -40 C- Stocked at -18 C Packing: a. 500g X 20bags, 10kg/ctn b. 2kg X 6bags, 12kg/ctn c. 1kg X 10bags, 10kg/ctn d. As customers requirement
well clean, washed & fresh, outer hard nail on, without bad smell Black spots maximum 3% black pad or ammonia burns Broken bones maximum 5% Moisture less than 3% Processing 100% Fresh and Frozen Well Dressed and cleaned No bruises No excessive Blood No bad smell No feather No Broken bones Moisture less than 3% Frozen Requirement :- Blast Frozen at -40�° C- Stocked at -18 �° C Packing: a. 500g X 20bags, 10kg/ctn b. 2kg X 6bags, 12kg/ctn c. 1kg X 10bags, 10kg/ctn d. As customers requirement
well clean, washed & fresh, outer hard nail on, without bad smell Black spots maximum 3% black pad or ammonia burns Broken bones maximum 5% Moisture less than 3% Processing 100% Fresh and Frozen Well Dressed and cleaned No bruises No excessive Blood No bad smell No feather No Broken bones Moisture less than 3% Frozen Requirement :- Blast Frozen at -40�° C- Stocked at -18 �° C Packing: a. 500g X 20bags, 10kg/ctn b. 2kg X 6bags, 12kg/ctn c. 1kg X 10bags, 10kg/ctn d. As customers requirement
well clean, washed & fresh, outer hard nail on, without bad smell Black spots maximum 3% black pad or ammonia burns Broken bones maximum 5% Moisture less than 3% Processing 100% Fresh and Frozen Well Dressed and cleaned No bruises No excessive Blood No bad smell No feather No Broken bones Moisture less than 3% Frozen Requirement :- Blast Frozen at -40�° C- Stocked at -18 �° C Packing: a. 500g X 20bags, 10kg/ctn b. 2kg X 6bags, 12kg/ctn c. 1kg X 10bags, 10kg/ctn d. As customers requirement
Type of wood: birch, alder, ash, hornbeam, oak Length: 25 cm Moisture content: 10-18% Bag size: 40cm x 60cm Weight of a bag: 8-12 kg Transportation options: Container or truck
