Calcium Formate 98% is calcium salt of formic acid which is also known as E238. It is stable at room temperature. It is highly inflammable and forms orthorhombic crystals.
Chemical Appearance
Calcium Formate 98% has the appearance of white crystals or crystalline powder. It smells slightly like acetic acid. It is soluble in water and insoluble in ethanol and methanol.
Calcium Chloride 94% is an ionic compound of calcium and chlorine. It can be produced either directly from limestone or as a by product of the Solvay process. It is hygroscopic in nature and behaves as a typical ionic halide.
Chemical Appearance
Calcium Chloride 94% is a crystalline white solid salt at room temperature. It is highly soluble in water and is deliquescent.
1.Molecular formula: Co3O4
2.Molecular weight: 240.797
3.CAS No.: 1308-06-1
4.Purity: Co:72%min
5.Storage: Keep the receptacle sealed and stored in a cool and dry place, and ensure that the working room has good ventilation or exhaust device.
Cobalt Tetroxide is similar to ferroferric oxide, and can be approximately regarded as a compound formed by cobalt oxide (CoO) and cobalt oxide (Co2O3). Black or grayish black powder. The apparent density is 0.5-1.5g/cm3, and the tap density is 2.0-3.0g/cm3. Cobalt Tetroxide can be slowly dissolved in hot sulfuric acid, but it is insoluble in water, n itric acid and h ydrochloric acid at room temperature. When heated above 1200 C, it will decompose into cobaltous oxide. When it is strongly heated to 900C in a hydrogen flame, it is reduced to metal cobalt.
Physical Properties
Aziridine appears as a colorless liquid at room temperature. It has a boiling point of approximately 57C and a melting point around -77C.
These physical properties are influenced by the tension within its three-membered ring.
The density is roughly 0.83 g/mL. Aziridine is also miscible with common organic solvents, enhancing its utility in chemical syntheses.
Its volatility and flammability demand careful handling under controlled conditions to prevent hazardous situations.
Physical Characteristics
The physical state of acetaldehyde is influenced by its molecular properties. At room temperature, it exists as a colorless, volatile liquid.
Its boiling point is relatively low, around 20.2�°C, indicating ease of evaporation and handling requirements for storage.
Acetaldehyde has a strong pungent odor. It shows moderate water solubility, allowing it to mix with water and dissolve in various solvents.
This solubility is crucial for industrial applications where it serves as a precursor to larger compounds. The properties like volatility and odor are critical for safety precautions during handling.
36 Waiting Room Chairs Suppliers
Short on time? Let Waiting Room Chairs sellers contact you.
Used for In vitro diagnostic (IVD) products such as diluent, wash, buffers, and detergents. Broad-spectrum bacteriostatic agents, can effectively inhibit most bacteria and fungi.
Part No. GB01025
CAS NO: 78491-02-8
EINECS NO 278-928-2
Ingredients Diazolidinyl Urea
Assay 98.0%
Molecular Formula C8H14N4O7
Molecular Weight : 278.23
Applicable PH range 3~9
Brand: Neocide
Packaging Pkg of 1kg/10kg/20kg
Storage Room temperature
Shelf life 2 years
Melting point -46 C
Boiling point 209-210 C(lit.)
density 0.806 g/mL at 25 C(lit.)
vapor pressure 12.4Pa at 20 C
refractive index n20/D 1.4359(lit.)
Fp 165 F
storage temp. Sealed in dry,Room Temperature
solubility miscible
form Liquid
pka 10.07 0.28(Predicted)
color Clear colorless to yellow
Water Solubility miscible
LogP 1.99 at 23 C
Aluminium photosphate white rhombic crystal or powder. Relative density 2.566. Melting point>1500 C. Insoluble in water, soluble in concentrated hydro chlori acid, concentrated acid, alkali, and alcohol.
At 580 C, the Chemicalbook is relatively stable, and at 1400 C, it does not melt and becomes a colloidal substance. Between room temperature and 1200 C, aluminum phosphate has four crystal forms, commonly known as Type.
Phenol is an organic compound, chemical formula C6H5OH, is a colorless needle crystal with a special smell.It's toxic, is an important raw material in the production of some resins, fungicides, preservatives and drugs (such as aspirin). It can also be used for disinfection of surgical instruments and excreta treatment, skin sterilization, itching and otitis media. Melting point 43�ºC, slightly soluble in water at room temperature, soluble in organic solvents; When the temperature is higher than 65�ºC, can be mixed with water in any proportion. Phenol is corrosive.
Lithium chloride (chemical formula: LiCl) is an alkali metal halide, a white, deliquable solid at room temperature. Due to the smaller ionic radius and higher hydration energy of lithium, the solubility of lithium chloride is much greater than that of other chlorides (83g/100mL, 20�??�?�°C). Its aqueous solution is alkaline. Lithium chloride is a sodium chloride type structure, in which the chemical bond is not a typical ionic bond, so it can be dissolved in many organic solvents, and ethanol, amines can form different admixtures. This property can be used to separate lithium chloride from alkali metal chlorides.
Solid wood flooring,Solid wood flooring, also known as wooden flooring, is a floor block made directly from natural solid wood. Solid wood flooring is divided into flat mouth flooring, tongue and groove flooring, finger jointed flooring, and integrated finger jointed flooring according to different processing shapes.Material tree species: Natural trees, including precious ones such as rosewood and teak, more common ones such as maple, oak, and water chestnut, and cheaper ones such as fir and pine.Stability: Relatively weak, prone to warping and cracking due to environmental thermal expansion and contraction.Application locations: bedroom, living room, study
Melting point -40 C (lit.)
Boiling point 197 C (lit.)
density 0.925 g/mL at 25 C (lit.)
vapor density 4.1 (vs air)
vapor pressure 0.02 mm Hg ( 20 C)
refractive index n20/D 1.427(lit.)
Fp 201 F
storage temp. Store below +30C.
solubility H2O: 1 M at 20 C, clear, colorless
form Slightly Viscous Liquid
pka 15.10±0.29(Predicted)
color Clear
PH 6-8 (25C, 1M in H2O)
Odor Ammonia-like.
explosive limit 1-9.9%(V)
Water Solubility soluble
2-Methyl-2,4-pentanediol (MPD) is a diol organic compound with a chiral carbon atom. It is a colorless liquid at room temperature and can be Diacetonee alcohol is hydrogenated. The appearance is colorless liquid with mild sweetness. It is miscible with water, soluble in ethanol, and soluble in most organic solvents.
Sodium Salt of 123Benzotriazole BTANa
CAS No 15217422
Molecular formula C6H4N3Na
Molecular Weight 14111
Properties
BTANa can be absorbed on metal surface and form a thin film to protect copper and other metals BTANa can be used together with many scale inhibitors and fungi disinfectants in circulating cool water system and it has good corrosion inhibition effect in circulating cool water system The dosage of 24mgl is preferred BTANa can also be used as antidiscolor agent coating additive and luboil additive
Specification
Items Index Appearance
Pale yellow to yellow transparent liquid
Active contentwt 500min
Density 20 gcm3 120 min
Package and Storage 200L plastic drumIBC1000Lcustomers requirement Storage for six months in shady room and dry place
Synonyms BTANa sodium salt of 123 Benzotrialole12 Aminoazophenylene123Triazaindene
1. Chemical Name : Sodium Citrate dihydrate
2. Molecular Formula : C6H9Na3O9; HOC(COONa)(CH2COONa)2·2H2O
3. Molecular Weight : 294.10
4. CAS : 6132-04-3
5. Einecs : 200-675-3
6. Character : White granular crystals or white crystalline powder. Stable in air at room temperature.
7. Usage : It is an anticoagulant and can also be used as a buffering agent and food preservative.
8. Packing : Preserve in tight containers. It is packed with plastics bags, 25kgs of each bag.
9. Storage and Transport : It should be stored in a dry and ventilated warehouse, kept away from water and moisture during transport, unloaded with care so as to avoid damage to bags. Furthermore, it should be stored separately from poisonous substances.
Product Name: N-Ethyl-2-pyrrolidone
Synonyms: 1-ethyl-2-pyrrolidinon;1-ethyl-pyrrolidin-2-one;2-Pyrrolidinone, 1-ethyl-;Agsol Ex 2;ethyl-2-pyrrolidone;N-Ethyl-2-pyrrolidinone;N-Ethylpyrrolidinone;N-Ethylpyrrolidone
CAS: 2687-91-4
MF: C6H11NO
MW: 113.16
EINECS: 220-250-6
Melting point 87.5-88.5 C
Boiling point 97 C/20 mmHg (lit.)
density 0.992 g/mL at 25 C (lit.)
vapor pressure 18Pa at 20C
refractive index n20/D 1.465(lit.)
Fp 169 F
storage temp. Sealed in dry,Room Temperature
form Liquid
pka -0.41±0.20(Predicted)
color Clear
PH 8-9 (100g/l, H2O, 20C)
Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated.
The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed.
Adding appropriate beeswax can increase the hardness of the finished wax Animal oil and fat extracted from honeycomb nest, granular, good toughness, suitable for
mixing with other waxes, melting point 65 degrees Celsius, can also be used to make difficult silicone mold wax alone.
Sodium Alpha Olefin Sulfonate is an anionic surfactant of Sulfosuccinate. After special treatment, the product has a small odor and good stability, and is easy to use. It has a high Krafft point, its high concentration of aqueous solution at room temperature can form a large number of crystals, so the production of bright pearlescent paste, good spread, paste stability, no thinning, no water, very little affected by temperature. It is the ideal raw material for weak acid paste washing products.
Application of Sodium alpha olefin sulfonate (AOS)
1. Irritation is very low, detergency is strong, belongs to mild surfactant.
2. The product is weakly acidic and easy to form paste. Pearl is bright, stable and easy to spread.
3. The foam is rich, delicate, stable, non greasy, very easy to rinse, clean after washing, and not tight.
4. Resistant to hard water and good biodegradability.
5. Excellent washing, emulsifying, dispersing, wetting and solubilizing properties.
It is a white crystal with corrosive to skin and toxic. It is soluble in water and methanol, slightly soluble in ethanol, insoluble in propanone and liquid ammonia. When it is in hot water decomposition will occur to release ammonia and ammonium bifluoride. It is white or colorless transparent orthorhombic crystal at room temperature, with a slightly sour taste. It is easily deliquescent when heated or in hot water and decomposes into ammonia and hydrogen fluoride. Decomposed in hot water, the aqueous solution is strongly acidic. It is obtained by neutralizing anhydrous hydrofluoric acid with liquid ammonia.
Mainly used as glass etching agent, wood and wine preservative, disinfectant, zirconium drops reagent and fiber mordant and reagents to extract rare elements. Chemical reagents, glass etchants (used in conjunction with hydrofluoric acid), disinfectants and preservatives in the fermentation industry, solvents for beryllium oxide to beryllium, surface treatment agents for silicon steel sheets, and production of ceramics, magnesium alloys, aluminum alloys, etc., boilers Scale removal and elution of feedwater systems and steam generation systems, acid treatment of oilfield sands, catalysts for alkylation and alkylation of isomerized components.
Feature
Citric acid monohydrate is an organic compound with a molecular formula of C6H10O8, which is mainly used in the food and beverage industries as a sour agent, flavoring agent and preservative. It is also used as antioxidant, plasticizer and detergent in chemical industry, cosmetic industry and washing industry.
Application field
1. Food industry
Citric acid is the most biochemically produced organic acid in the world. Citric acid and salts are one of the pillar products of the fermentation industry, mainly used in the food industry, such as sour agents, solubilizers, buffers, antioxidants, Deodorizing agent, flavor enhancer, gelling agent, toner, etc.
2. Metal cleaning
It is widely used in detergent production, and its specificity and chelation play a positive role.
3. Fine chemical industry
Citric acid is a kind of fruit acid. Its main function is to accelerate the renewal of cutin. It is often used in lotion, cream, shampoo, whitening products, anti-aging products, acne products, etc.
Storage
Avoid light, seal, ventilate, store in a dry and cool place at low room temperature.
Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000
Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives.
It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.
36 Waiting Room Chairs Suppliers
Short on time? Let Waiting Room Chairs sellers contact you.
