CAS 124-07-9 HS code 2917120001 25kg plastic woven bags or 900kg plastic woven bags Oxalic Acid 99.6%min. Specification: PURITY: 99.6% min. SULPHATE: 0.08% max. HEAVY METALS(Pb): 0.001% max. FERROUS (Fe): 0.0015% max. CHLORIDE: 0.003% max. IGNITION RESIDUE: 0.08% max. 99.6% min Oxalic Acid h2c2o4.2H2O technical standard 99.6% min Oxalic Acid Usage: 1. In Metallurgy industry: as precipitating and separating function for Rare-earth metal. 2. In industry: 99.6% min Oxalic Acid used in Tetracycline, Oxytetracycline, Phenobarbital, and Borneol, etc. 3. In Dyeing and printing industry: as reducing agent for dyeing and printing industry, as bleaching agent for textile, substitute for Acetic acid, as coloring mordant for fast pigment dyestuff. 4. In organic synthetic: 99.6% min Oxalic Acid used in 2133 resin, Urea-formaldehyde molding powder, Butadiene catalyst, etc. 5. In electron industry: preparation of chemicals raw material for porcelain capacitor, preparation of electron equipment detergent. 6.In Light industry: polishing for Marble, rust-remover, bleaching, dirt-remover, leather-remover. bleaching.
Oxalic Acid Dihydrate is used in various industrial applications such as a Precipitating agent in rare earth mineral processing, bleaching agent in textile activities and wood pulp bleaching, rust remover for metal treatment, grinding agent such as marble polishing, waste water treatment, calcium remover in water, cleaning and sterilizing equipment, reducing agent for photography and ink removal, purifying agent in pharmaceutical industry. Oxalic Acid is also used to remove food and rust satins from kitchen countertops, plumbing fixtures and fabrics. Physical And Chemical Properties Physical State: Fine White crystal Melting Point: 101-102C Boiling Point: 149-160C Specific Gravity: 1.6-1.7 Solubility in Water: 1 g/7ml Vapor Density: 4.4 NFPA Ratings: Health: 3; Flammability: 1; Reactivity:0 Flash Point: 163 C Stability: Stable under ordinary conditions Sales Specification Appearance:Fine white crystal Assay: > 99.60 % Ca: < 15 ppm Fe: < 15 ppm Na: < 15 ppm K: < 15 ppm Pb (Heavy Metal content): 10 ppm SO4 (Sulfate content): 800 ppm Packing 50 Lb bag, 44 bags per pallet 2204.60 Lb supersack, 1 supersack per pallet
Tall oil fatty acids are used in dimer acids, alkyd resins, oilfield chemicals, metalworking fluids, liquid cleaners, textile chemicals, lubricansts,fuel additives, construction chemicals, rubber and tire, metallic stabilizers, printing ink, ore flotation, and fatty derivatives. Specifications Appearance: Yellow Liquid Acid Number: 193-200 Water: 0.5% Max IR: >0.9800 Packing 2,000 LB tote 400 LB drum, 4 drums per pallet
Linear Alkybenzene Sulfonic Acid (sometimes referred to as Dodecylbenzene Sulfonic Acid or DDBSA) is a light yellow to dark brown colored liquid. LABSA is widely used in household products like detergents, shampoos, and hair conditioners, as well as in numerous industrial applications like as a catalyst for the esterification of fatty acids to produce biodiesel, and also for the synthesis of quinoxaline derivatives. LABSA is also used as a dopant for conducting polymers, a wetting agent, a dispersant, a foamer, a paraffin inhibitor, acidizing agent and an emulsion breaker. Linear Alkylbenzene Sulfonic Acid (LABSA) WC Code: 04-073-003 Sales Specification Appearance: Viscous Amber Liquid Active Matter (Mws: 322): 96.0 % MIN Unsulfated Organic matter: 2.0 %MAX Free Sulfuric Acid: 1.50 % MAX Color, Klett (5% AM soln): 40 MAX Acide Value: 182.0 to 188.0 Packing 474/463 LB plastic Drum, 4 drums per pallet 2314.83 LB IBC Tote DOT Transportation UN No.: 2586 Proper shipping name: Alkyl Sulfonic Acids, Liquid Hazard class: 8 Packing Group: III CERCLA Reportable Quantity: 1000 lbs
Ferric Ammonium Oxolate is used in the preparation of Langmuir-Blodgett magnetic thin films. It is also involved in the production of blueprint paper. Its also used As a precipitant of calcium and magnesium. Ferric Ammonium Oxalate is used in the electroplating industry for the chemical absorption on anodized aluminum, producing a range of gold colors from light champagne hues to dark gold finishes. Specifications Appearance: Light Yellowish Green Crystal Content: 99.0% Fe: 12.65~13.30% PH 4.2-5.5 Packing 55.12 KB Bag, 40 bags per pallet DOT Transportation Information: UN/NA: 3077 Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (Triammonium Iron (3+) trioxalate trihydrate) Reportable Quantity (RQ): 1000 lb Poison Inhalation Hazard: No Hazard Class: 9 Packing Group: III
Almonds nuts, cashew nuts, pistachios nuts, nuts & dried fruits, rice & grains, pulses, chickpeas, green lentils, red lentils, red kidney beans, sugar, energy drinks, baby food, fmcg products, a4 copy paper, toiletries, oils and fats, refined sunflower oil, frozen chicken, frozen pork, food chemicals, beverages, aluminum foil, baking papers and nylons, trash can bags and liners, organic chemicals, water chemicals, agricultural chemicals, confectioneries, cosmetics, cleaners and disinfectants, lubricants, fresheners and purifiers, pet foods, pure chemicals, solvents, acids, inorganic chemicals, dry fish, milk products, avocado, frozen fish, frozen vegetable, dairy products, condiments and dippings, cereals and oatmeals, medical kits, seafood, motor oil, baby milk powder, laundry & detergents, bathroom & toilet cleaners.Trade.
Tartaric Acid USP Food Grade also known as L+Tartaric Acid is mainly used as an food additive in many foods, such as soft drinks, bakery products, and candies. It also has many industrial uses like tanning, ceramics manufacture, and the production of tartrate esters for lacquers and textile printing. It acts as an intermediate to antitubercular drugs and a chiral reagent to prepare tartrate derivatives. It is used as a catalyst for resin finishing of polyester fabric, a resist agent in dyeing, an imaging agent in photography, a pH regulator for oryzanol synthesis, a cleaning and polishing agent of the metal surface, as a reductive agent in mirror manufacturing, in electroplating, sulfur removal, and acid pickling. Sales Specification Content: 99.5~101.0% Appearance: White Crystal Powder Appearance of Solution: Passes Specific Optical Rotation: +12degree ~12.8degreee Oxalic Acid: 350 PPM Max Cl: 100 PPM Max SO4: 150 PPM Max Ca: 200 PPM Max Heavy Metals (as Pb): 10 PPM Max Loss on Drying: 0.2% Max Sulfated Ash: 0.1% Max Arsenic:0.0003% Max Packing 55.12 lb bag, 40 bag per pallet
Ascorbic Acid USP/FCC is used in the Food and beverage industry as a preservative, antioxidant, and flavoring agent in various products such as fruit juices, soft drinks, and breakfast cereals. It is also used in Skincare and cosmetics as an active ingredient in anti-aging products and to brighten and even out skin tone. It is used in Water treatment as a reducing agent to remove chlorine and other chemicals from water. Ascorbic Acid can also be used in Photography: as a developing agent in film and photography. It is used in Horticulture as a plant growth enhancer and to protect plants from environmental stress. Ascorbic Acid is also used in cleaning products as a stain remover. It is also used to remove rust from metal surfaces. Sales Specifications Appearance: White crystalline powder Identification: Positive Clarity of Solution: Clear Color of Solution: BY7 Assay: 99.0 -100.0% Loss on Drying: 0.4% Residue on Ignition: 0.1% Sulfate Ash: 0.1% Specific Rotation: +20.5 ~ +21.5 pH(with 2% water solution): 2.4 - 2.8 pH(with 5% water solution): 2.1 -2.6 Melting Range: about 190C Heavy Metals: 3ppm Iron: 2ppm Copper: 5ppm Oxalic Acid: 0.2% Arsenic: 1ppm Lead: 2ppm Cadmium: 1ppm Mercury: 1ppm Organic Volatile Impurities: Meets the Requirements Related Substances: ImpurityC 0.15% ImpurityD 0.15% Any Other Unspecific Impurities Impurity 0.10% Total Impurity 0.2% Total Plate Count: 1,000cfu/g According to BP2010, E300, USP32, FCC7, EP7 Packing 55.12 LB per carton, 40 cartons per pallet
Gluconic Acid 50% FCC is mainly used as a chelating agent in foods, cleaning applications, electroplating, concrete admixtures and as an Acidulant in foods. It is used in food like dairy, flavors, instant meals, and sauces and dressings. It's used in personal care products like hair, oral and skin care. It is also used in industrial cleaners and surface care products. Gluconic Acid is also used in fine chemicals, agrochemicals, fertilizers, metal surface treatments and textile & leather. Specifications Appearance: Clear, Light Yellow Liquid Reducing Substances: 0 -2% Lead: 0 -1 PPM Chloride: 0 - 140 PPM pH (10% soln.): 2 - 3 Sulfate: 0 - 500 PPM Heavy Metals (as Pb): 20 PPM Max Arsenic: 0 - 3 PPM Gluconic Acid: 49.5- 50.5% Specific Gravity: 1.21 - 1.27 Acetic Acid: 0 - 0.4% Oxalates: 0 - 0.2% Yeast/Mold: None Residue on Ignition: 0 - 1% Mercury: 0 - 1 PPM Packing 2,500 LB tote
Isocyanuric Acid also known as Cyanuric Acid is a white odorless solid. Its an industrial chemical that is used as a raw material and precursor to prepare cyanuric acid bromide, chloride, iodine chloride, bromo chloride, and its cyanurate ester which are used to manufacture , bleaches, paints, herbicides, plastic, nylon, resin, chlorine stabilizer, chlorinating/bromination agents, antioxidants, metal cyanide mitigants and polyester flame retardant. Isocyanuric Acid (Cyanuric Acid) 09-020-01 Sales Specification Assay (%): 98.5 Min PH (1% Solution): 2.8 Min Moisture, %: 0.5 Max Residue of Ignition (Ash), %: 0.1 Max Ferric Content, PPM: 10 Max Concentration of Ammelide & Ammeline, %: 0.5 Max Ammonia, PPM: 20 - 200 Packing 55.115 lb pail, 18 pails per pallet.
Ferrous Gluconate Dihydrate USP also know as Iron(II) Gluconate Hydrate is a compound that has acidic properties. It is produced by the dehydration of iron gluconate and is used in many different applications, such as photoelectron spectroscopy, magnetometry, and dispersive analysis. Ferrous Gluconate Dihydrate USP can also be used to produce coagulated blood samples, which are then analyzed using infrared spectrometry or microscopy. Ferrous Gluconate Dihydrate USP is also used as an iron supplement and food additive in the food and pharmaceutical industries. It is also used as a nutrient source for microorganisms in fermentation processes and as a laboratory chemical for research and development. Specifications Assay: 97.00% -102.00% Identification: Conforms Reducing Sugars: Conforms Oxalic Acid: Conforms Loss on Drying: 6.5-10.0% Chloride: 0.07% Sulfate: 0.1% Lead: 0.001% Mercury: 3ppm Arsenic: 3 ppm Ferric Iron: 2.0% Packing 55.12 LB Drum
Trichloroisocyanuric Acid (3 Tablets) also known as TCCA has a wide range of uses that cover several domestic and commercial applications. TCCA also has great applications in textile cleansing and bleaching, wool shrink resistance, paper insect resistance and rubber chlorination, amongst others. Physical And Chemical Properties Physical State: Crystalline substance Melting Point: 226C Solubility in Water: 12 g/l Solvent solubility: Soluble in chlorinated and highly polar solvents PH: 3.0 (1% sol) NFPA Ratings: Health: 2; Flammability: 0; Reactivity:2 Flash Point: 255 C Stability: Stable under ordinary conditions Sales Specifications Also known as: 3 Pool Tabs Available chlorine: 90% Min Moisture: 0.5% Max PH (1% water solution): 2.6-3.2 Diametre: 76 MM Height: 26 MM Packing 50 lb pail, 24 pails per pallet DOT Transportation UN No: 2468 proper Shipping Name: Trichloroisocyanuric acid, Dry Hazard Class: 5.1 Packing Group: II
Tannic acid has wide application in the food industry as it is used as a flavor enhancer, color stabilizer, and clarifying agent in foods. Tannic Acid also has industrial applications like it is used in the production of albumin tannate which is used as an antidiarrheal agent. It is used in the conservation of ferrous metal objects to inhibit corrosion. It is used in the dyeing process for cellulose fibers. It is used to impart anti-staining properties to polyamide carpets or yarn. It is used as a coagulant in the manufacturing of rubber. It is used as a reagent in analytical chemistry. It is used with a mixture of albumin and gelatin to manufacture tortoiseshell. It is utilized in animal nutrition and feed. Tannic Acid FDQ WC Code: 20-067-04 Sales Specification Appearance: Reddish Brown Powder Tannin/Fm %: 70.00 % Min -100.00% Max Ph (10%): 4.4000% Min-5.2000% Max Humidity %: 12.00000 % Max CNZBS % : 3.5000 % Max Packing 25 kg bag, 40 bags per pallet Tannic Acid TRP WC Code: 20-067-05 Sales Specification Appearance: Reddish brown powder Tannin (on dry matter) %: > 81,50 Moisture %: < 8,00 pH 1%: 3,00 / 4,00 Ashes %: < 4,00 Packing 25 kg carton
Palmitic acid is used to produce soaps, cosmetics and personal care products, and industrial mold release agents. These applications use sodium palmitate, which is commonly obtained by saponification of palm oil. Palmitic Acid is used in the following products: soaps and detergents, coating products, polishes and waxes, air care products, fillers, putties, plasters, modelling clay, plant protection products, finger paints, adhesives and sealants and biocides (e.g. disinfectants, pest control products). Palmitic acid can be further refined or combined with other chemical agents to produce isopropyl palmitate, cetyl alcohol and other additives. Sales Specification Iodine value, (al2, 100 g): 0.3 Max Saponification value (mg KOH/g): 217-221 Acid Value (mgKOH/g): 216-220 Titre: 60-63�°C Colour, Lovibond 5 1/4,Y: 2.0 Yellow Colour, Lovibond 5 1/4,R: 0.2 Red Colour, APHA: 40 Hazen Package 25 Kg plastic woven bags.
Iminodiacetic acid is an important intermediate in one of the two main industrial processes used to manufacture the herbicide glyphosate. It is used in capillary electrophoresis for modulating peptide mobility. It is also used as a precursor for the manufacture of the indicator xylenol orange. It is also used in chemotherapeutic treatment for metal poisoning. It acts as a tridendate ligand and forms metal complexes. Furthermore, it is used as a chelating agent that strongly binds transition metals. Iminodiacetic acid can be used for removal of toxic metal ions from water. Physical And Chemical Properties Physical State: Yellow crystalline powder Melting Point: 243C NFPA Ratings: Health: 2; Flammability: 0; Reactivity:0 Stability: Stable under ordinary conditions Sales Specification Appearance: White crystalline powder Melting point: 240-250 C Assay (IDA): 98% Min Sodium: 100 PPM Max Water: 0.5% Max Ash (Sulfate): 1.0% Max Packing 25 KG kraft paper bag. 36 bags per pallet.
Tricyanic acid Product specifications: Molecular formula: C3H3N3O3 Molecular weight: 126.583 CAS Number: 108-80-5 Density: 2.0±0.1 g/cm3 Melting point: 360 C Boiling point: 793.4±43.0 C at 760 mmHg logP: -1.41 Flash point: 433.6±28.2 C Appearance: White crystalline granular or powder Solubility: Slightly soluble in water, slightly soluble in ethanol, soluble in concentrated sulfuric acid, hot inorganic acid Main features: 1, reasonable price, stable quality, short delivery time 2. Timely follow up orders and arrange delivery according to the policies of different countries, and provide complete customs clearance documents 3. Can inform customers of market price trend in time 4. Any inquiry will be answered within 12 hours Product application: For the synthesis of chlorine derivatives, salts, lipids; Trichloroisocyanuronic acid; Sodium or potassium dichloroisocyanurate; Used for synthesis of cyanuric acid-formaldehyde resin; Epoxy resin; Antioxidant; Paint; Paint; Adhesive; Pesticides and herbicides; Metal cyanide corrosion inhibitor; Polymer material modifier, etc.; It is used in the production of drug halotrihydroxyzine. Synthetic new bleach agent; Can be used in swimming pool chlorine stabilizer, sterilization, decontamination; It can also be directly used for nylon, Saik, combustion agents and cosmetic additives, laminated plastic materials and high temperature glass steel and other raw materials.
CAS : 64-18-6 HS Code : 2915-110000 Packing : 25kgs/35kgs/250kgs/IBC Drum/ISO Tank Application Formic acid is an organic substance with a chemical formula of HCOOH and a molecular weight of 46.03. It is commonly known as formic acid and is the simplest carboxylic acid. Colorless liquid with pungent odor. Weak electrolyte, strong acid, corrosive, can stimulate skin to blister. Exist in the secretions of bees, some ants and caterpillars. It is an organic chemical raw material, also used as a disinfectant and preservative.
Application Nitric acid is the inorganic compound with the formula HNO3. It is a highly corrosive mineral acid.[6] The compound is colorless, but samples tend to acquire a yellow cast over time due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water. When the solution contains more than 86% HNO3, it is referred to as fuming nitric acid. Depending on the amount of nitrogen dioxide present, fuming nitric acid is further characterized as red fuming nitric acid at concentrations above 86%, or white fuming nitric acid at concentrations above 95%. Nitric acid is the primary reagent used for nitration â?? the addition of a nitro group, typically to an organic molecule. While some resulting nitro compounds are shock- and thermally-sensitive explosives, a few are stable enough to be used in munitions and demolition, while others are still more stable and used as pigments in inks and dyes. Nitric acid is also commonly used as a strong oxidizing agent.
CAS 7647-01-0 HS code 2806100000 Usage of Hydrochloric acid: Hydrochloric Acid used in petrol, chemistry, medicine, paint, paper, textile industries, resin regeneration, pickling, as pH decreaser in potable water and utility waters and production of metal chlorides. Package: 250kgs/drum 80 drums/20'fcl 17.6mts/20'fcl 1.15mts/IBC drum 20 drums/20'fcl 23mts/20'fcl
Packaging: 300kg*80drums, 24ton/FCL(With or without pallets); Hydrobromic acid is a strong acid formed by dissolving the diatomic molecule hydrogen bromide (HBr) in water. "Constant boiling" hydrobromic acid is an aqueous solution that distills at 124.3 �°C (255.7 �°F) and contains 47.6% HBr by mass, which is 8.77 mol/L. Hydrobromic acid has a pKa of â??9, making it a stronger acid than hydrochloric acid, but not as strong as hydroiodic acid.Hydrobromic acid is one of the strongest mineral acids known.
