Sodium Bifluoride also known as Sodium Hydrogen Difluoride Is mainly used as a precursor to sodium fluoride, millions of tons of which are produced annually. It is used to manufacture tin plates, as a neutralizer in laundry to preserve anatomical/zoological samples, and for glass etching. It is also used in antiseptics, leather bleaches, and cleaners (for stone, brick, ceramics, and masonry). It is also utilized in the synthesis of fluoride glasses at RT. Specification Assay: 98.00 % Min. Appearance: White free flowing powder Solubility: Highly soluble in water Melting Point: Starts to decompose into NaF and HF above 140C Hydrogen Fluoride (HF): 32.00 % Min. Fluorine (F): 59.65 % Min. Sodium (Na): 37.20 % Min. Moisture (@ 100C): 0.80 % Max. Iron(III) Oxide (Fe2O3): 0.02 % Max. Silica (SiO2): 0.10 % Max. Water Insoluble: 0.20 % Max. pH (1% Solution): Acidic Sieve Grading/Density 100 BSS (152 �¼m) = 100 %: + 100 BSS (152 1/4m) = NIL + 200 BSS (75 �¼m) = 20 %: 200 BSS (751/4m) = 80 % Packing 55.12 lb bag, 40 bags/pallet DOT Transportation UN/NA: 2439 Proper Shipping Name: Sodium Hydrogen Difluoride Hazard Class: 8 Packing Group: II
Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�??�?�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�??�?�°C, reduced to CoO at 200�??�?�°C, and reduced to cobalt metal at 250�??�?�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.
Our industrial grade iron oxide pigments are an efficient, stable and cost-effective industrial pigment to improve product quality! and have excellent coloring and hiding power, whether used in architectural coatings, road markings, plastics, rubber or ceramics, they provide bright and long-lasting color effects. Our iron oxide pigments are used in the manufacture of various bricks, including red bricks, yellow bricks, decorative bricks and landscape bricks.Whether it is residential buildings, commercial buildings or landscape buildings, our products can meet your needs.
Uses of Composite Straps Keep the items in a secure way by using the composite straps. Therefore, check the uses of it. The composite straps build together with the top quality material to pack the materials. It provides securing coils to the steel or paper. The materials such as bricks, glasses, and metal pieces are packed in a unit load. It is effective using the composite straps packing the corrugated boxes and shipping containers. Features Light Weight Safe and No Risk of Injury No Corrosion and Easy Handling Re-tensionable Shock-absorbent, High Retained Tension High Impact Resistance
Nestle NAN OPTIPRO 3 The toddler stage is an amazing time when your child starts exploring the world around them. Age appropriate nutrition offers an important foundation for young children. Proteins are one of the most important nutrients for your toddler's growth and development, that's why proteins are called bricks of life. But did you know that many children get too much protein in their diet? NAN OPTIPRO 3 has been specially formulated for your toddler to enjoy supplementary to a varied diet when energy and nutrient intakes may not be adequate.
Red Kidney Beans Types Dark Red Kidney Beans The Dark Red Kidney Beans are medium in size and elongated. The color is dark amber and smooth without marking. The Beans are famous of their deep flavor and smooth texture. These beans are used in most kitchens and standby for chili and baked beans. Small Red kidney Beans Small Red Beans are known as Habichuelas, HabasPaquenosColorados and Red Mexican. These beans are Plump, Round Beans and have the Deep Brick Red Color. The size of the bean ishalf inch long. The flavor is mild and texture is firm. This bean is much famous in southern red bean dish and Rice.
CAS : 69102-90-5 HS Code : 3902900020 HBN boron nitride powder property Adopting international leading technology -Trimeric Amine Method, to produce boron nitride powder. Sintered under temperature as high as 2000�ºC , boron nidtride powder has characterstics of well crystallization, high purity, stable quality. PENSC boron nitride powder can be widely usedin fireproof materials, die-casting ceramics, lubricating demould, heating conducting additives, etc. Used for high-temperature solid lubricants, extrusion anti-wear additives, additives for the production of ceramic composites; Used in special electrolysis and resistance materials for high temperature conditions; Used for heat shield materials in aerospace; Used as a release agent for metal forming and a lubricant for metal wire drawing;
Chitosan 90% High Density is made from shrimp and crab shell; it is a biodegradable and biocompatible material that has several unique properties such as biodegradability, and biocompatibility. High-density chitosan has 2-3 times the density (â?¥0.6g/ml) of ordinary chitosan, and its ability to absorb grease is more than 3 times that of ordinary chitosan at the same volume. These properties make it suitable for various applications including biomedical, agricultural, and environmental. In the field of biomedical engineering, chitosan is used in wound healing, drug delivery, tissue engineering and as a coating for medical devices. Sales Specification Sales Specification Characteristics: Off-white or light yellow powder Identification: Adding CuC4H4O6 TS and heating a brick-red or deep brown precipitate is formed DAC Degree: >90% Viscosity : 50mpaâ??s â?? 800mpaâ??s Moisture:
CAS 7440-42-8 25kgs/bag,20tons/20'container CAS 7440-42-8 is a black or dark brown powder. When it is oxidized in the air, it will prevent the internal boron from continuing to oxidize due to the formation of a boron trioxide film. It can react at normal temperature Amorphous Boron Powder is insoluble in water, powdered boron is soluble in boiling and most molten metals such as copper, iron, manganese, aluminum, and calcium. 1. Boron fiber has high strength (breaking strength at room temperature is 2744 ~ 3430MPa) and high modulus of elasticity (39200 ~ 411600MPa), which is an excellent reinforcing material. 2. Composite materials made of boron fiber with metal (aluminum, magnesium, titanium, etc.), various resins (epoxy resin, polyamide, etc.) and ceramics are excellent high-temperature structure materials. 3. Reinforcement ceramics made of titanium boride have excellent abrasive resistance and high toughness (up to 10 MPa�·m 1/2 or more), which are used to manufacture conductive parts for heating equipment and ignition devices. 4. Used as a deaerator in the metallurgical industry and an additive to improve the structure of metal grains. 5. Boron-cast iron is widely used in automobile, tractor, machine tool and other manufacturing industries.
Sulfamic Acid also known as sulphamic acid or amidosulfonic acid is used in different applications such as in Formulating cleaning agents, Cleaning metals and ceramics. It's utilized in Pulp and paper industry as a chloride stabilizer and as a Chemical catalyst for esterification process. It's used in Dye and pigment manufacturing, as well as an ingredient in fire extinguishing media. It is used as a chemical reagent and in metal salts electroplating, acid cleaning, and photography. It is a widely used scavenger of nitrous acid. Sulfamic Acid is also used in sterilization and as a curing agent in the plastic industry. Sales Specification Appearance: White, crystalline powder Purity: 99.80 % Min. Sulfate: 0.03 % Max. Heavy Metals (Pb): 0.0003 % Max. Iron: 0.0003 % Max. Water Content: 0.05 % Max. Packing 55.12 lbs, 40 bags per pallet DOT Transportation UN No: 2967 Proper shipping name: Sulfamic acid Packing Group: III Hazard Class: 8
Copper Chloride Dihydrate is a brownish-yellow hygroscopic powder, It is used in the dyeing and printing of textiles, as red pigment in the glass and ceramic industries, and for green-colored pyrotechnics, wood preservative, deodorizer, water purification, feed additive, pharmaceuticals, marking inks and electroplating baths. In other applications, It can also be used as a chlorinating agent; oxidizing agent; Lewis acid; or catalyst for conjugate additions and acylation. Copper Chloride Dihydrate is an effective catalyst in organic and inorganic reactions. Sales Specification CuCl2.2H2O: 98.00 % Cu: 36.00 % As: 0.02 % Ca: 0.02 % Zn: 0.02 % SO42-: 0.03 % Water Insoluble: 0.02 % Packing 110.23 Lb drum, 6 or 9 drums per pallet DOT Transportation UN No.:2802 Proper Shipping Name: Copper Chloride Hazard Class: 8 Packing Group: III RQ
CAS : 1310-73-2 HS Code : 2815110000 Packing : 25kg/bag 1.Used in the production of paper and cellulose pulp. 2. Used for the production of soap, synthetic detergents, synthetic fatty acids. 3. Used as cloth desizing agent, scouring agent and silk polish agent in textile printing . 4. Used in the production of borax, sodium cyanide, formic acid etc in the chemical industry. It is strongly alkaline and corrosive. It can be used as acid neutralizer, matching masking agent, precipitating agent, precipitation masking agent, color developer, saponification agent, stripping agent, detergent, etc. With strong alkaline and strong hygroscopicity. Easily soluble in water, exothermic when dissolving. The aqueous solution is alkaline and greasy. It is highly corrosive and is corrosive to fibers, skin, glass and ceramics. It reacts with aluminum, zinc, non-metallic boron, and silicon to release hydrogen, and undergoes disproportionation reaction with halogens such as chlorine, bromine, and iodine, and neutralizes with acid to generate salt and water.
CAS 1310-65-2 HS code 282520100 25kg/bag&30kg/drum. Lithium hydroxide is one of the most important lithium compounds, including anhydrous LiOH and LiOH �· H2O. Anhydrous LiOH is white tetragonal crystalline particles or mobile powder, with relative density of 1.45g/cm3, melting point of 471.2 �ºC and boiling point of 1620 �ºC. Lithium hydroxide monohydrate is a white single crystal powder that is easy to deliquescence. The phase chemical book has a density of 1.51g/cm3 and a melting point of 680 �ºC. When the temperature is higher than 100 �ºC, the crystalline water is lost and becomes anhydrous LiOH. LiOH is soluble in water and slightly soluble in alcohol. It is easy to absorb CO2 in air to form Li2CO3. LiOH and its concentrated solution are corrosive and can corrode glass and ceramics at general temperature.
Trisodium Phosphate Anhydrous Granular FCC is mainly used as a buffering agent, emulsifying agent, anti-caking agent, antioxidant and nutritional supplement in the food industry. It is used in food products like smoothie and beverages .It has many industrial applications as well, it's used in water processing, as a washing agent and in detergent, Textile and leather agent, Ceramic, Enamel, Colors, Photographic developers; removing boiler scale; water softer; wet finishing ph value adjustment; aluminum polishing, burnishing; sugar refining; complementary feeding stuff ; cleaning compound. Sales Specifications pH (1% sol): 11.5 -12.5 Bulk Density, gm/cc: 0.80 Min. Water Insoluble, %: 0.1 Max. Loss on Ignition (Dry at 110 for 5 hr then ignite at 800�°C for 30 min), %: 2.0 Max Phosphate as (P2O5), %: 42.0 - 43.5 Assay, %: 97.0 Min Particle Size Distribution: Retained on 20 mesh (850 �µm), %: 20.0 Max Passed thru 100 mesh (150 µm), %: 35.0 Max. Parameter Fluoride as F, ppm: 10.0 Max. Arsenic as As, ppm: 3.0 Max. Lead as Pb, ppm: 3.0 Max. Cadmium as Cd, ppm: 1.0 Max. Mercury as Hg, ppm: 1.0 Max. Packing 55.12 Lb Bag, 40 bags per pallet
Tartaric Acid USP Food Grade also known as L+Tartaric Acid is mainly used as an food additive in many foods, such as soft drinks, bakery products, and candies. It also has many industrial uses like tanning, ceramics manufacture, and the production of tartrate esters for lacquers and textile printing. It acts as an intermediate to antitubercular drugs and a chiral reagent to prepare tartrate derivatives. It is used as a catalyst for resin finishing of polyester fabric, a resist agent in dyeing, an imaging agent in photography, a pH regulator for oryzanol synthesis, a cleaning and polishing agent of the metal surface, as a reductive agent in mirror manufacturing, in electroplating, sulfur removal, and acid pickling. Sales Specification Content: 99.5~101.0% Appearance: White Crystal Powder Appearance of Solution: Passes Specific Optical Rotation: +12degree ~12.8degreee Oxalic Acid: 350 PPM Max Cl: 100 PPM Max SO4: 150 PPM Max Ca: 200 PPM Max Heavy Metals (as Pb): 10 PPM Max Loss on Drying: 0.2% Max Sulfated Ash: 0.1% Max Arsenic:0.0003% Max Packing 55.12 lb bag, 40 bag per pallet
Sodium Molybdate Dihydrate is used in applications like as a Micronutrient in manufacture and use of fertilizers and feed additives, as a Corrosion inhibitor, as a Manufacture of pigments, as a Industrial detergent for metal surface treatment , as a Cleaning & maintenance material, As coolant/anti-freeze/heat transfer fluid, it's used in Metal working fluids, it's used in Industrial formulation & use of lubrication additives, lubricants and greases, it's used in Manufacture of enamels frits and ceramics. It's also used in Manufacture of water softener and Polymer preparations & compounds. It is also used in Industrial chemical products such as pH regulator, flocculants, precipitants, neutralization agents. It's utilized as an Extraction agent, in photochemical, and in the Manufacture and use of catalysts. Sales Specifications Na2MoO42H2O : 99.50 % Min Insolubles : 0.01% Max pH of 5% Solution: 7.0-10.5 Chloride: 0.05% Max Phosphate: 0.03% Max Sulfate: 0.05% Max Heavy Metals including Pb: 0.01% Max Iron (Fe): 0.003% Max Loss on Ignition: 15.34% Max Molybdenum: 39.5% Min Packing 250 lb drum, 4 drums per pallet
Sodium Lignosulfonate is a natural polymer derived from wood pulp. It is a light yellow to brown powder that dissolves easily in water. It has various applications and functions in different industries such as it is used as a dispersant and binder for concrete, ceramics and gypsum. It reduces the water content and improves workability and strength in materials. It also works as a de-foaming agent and preservative for paper productions and food processing. It prevents the formation of foam and inhibits the growth of microorganisms. Itâ??s used a surfactant and emulsifier for oil drilling, dyeing, leather and cosmetics. Sodium Lignosulfonate is also used as a fertilizer and feed additive for agriculture and animal husbandry. It's also used in the textile, chemical, metallurgical and petroleum industries. Sodium Ligonosulfonate is a versatile and environmentally friendly substance that can be used for various purposes. It is also biodegradable and non toxic to human and animals. Sales Specification Appearance: Yellow Brown Powder Ph: 8.67 Dry Matters: 96.4 % Water-Insoluble: 0.85 % Lignosulfonate: 61.00 % Reducing Sugar: 5.4 % Sulfate: 2.7 % Calcium & Magnesium: 0.38 % Moisture: 6.0 % Packing 55.12 lb bags, 20 bags per pallet
Sodium Dichromate also known as Sodium Bichromate is used in a variety of industrial applications like as an oxidizing agent (to make dyes, inks, and other chemicals), bleaching agent (fats, oils, sponges, and resins), tanning agent, and mordant in dyeing; Also used in electric batteries, for refining petroleum, electro-engraving copper, in corrosion inhibitors and corrosion inhibiting paints, metal treatments, hardening gelatin, defoliation of cotton and other plants and shrubs, and as a topical anti-infective; Used for metal finishing (chrome plating, electroplating, passivating, anodizing, and brightening), to make vitamin K, colored glass, ceramic glazes, essential oils, and perfumes. Sales Specification Appearance: Orange-red mono-slanting corrugation crystallization or fine needle crystallization. Assay (Na2Cr2O7.2H2O): 98.5% Min Sulphate (SO4 2-): 0.3% Max Chloride(Cl-): 0.05% Max Iron (Fe): 0.006% Max. Water solubles: 0.01 Max. Packing 110.23 Lb drums, 18 drums per pallet DOT Transportation UN/NA: 3288 Proper Shipping Name: Toxic solid, inorganic, n.o.s. (Sodium dichromate) Hazard Class: 6.1 (Poisonous material) Packing Group: III RQ The Reportable Quantity (RQ) under CERCLA is 10 lbs
Silicone Fluid is used mainly as an intermediate for the production of a wide variety of products in the chemicals and industries. Fluid is intended for use in a variety of medical applications including; lubricant for plastic or rubber devices and instruments, inert protective coating and water repellent film on the skin, and a hydrophobic surface on glass and ceramic substrates. Silicone Fluid 350 WC Code: 19-122-01 Sales Specifications Appearance: Liquid Visc Cstks (cSt): 332.5- 367.5 HCL PPM (ppm): 0 - 5 WGT Loss (%): 0.5 Max. REF Index @25C: 1.4013- 1.4053 Spec Gravity (g/cm): 0.965- 0.973 D4: < 1000 ppm D5: < 100 ppm Packing 441 lb drum, 4 drums per pallet Silicone Fluid 1000 WC Code: 19-122-02 Sales Specifications Appearance: Liquid Visc Cstks (cSt): 950.0 - 1050.0 HCL PPM (ppm): 0 - 5 WGT Loss (%): 0.5 Max. REF Index @25C: 1.4013-1.4053 Spec Gravity (g/cm): 0.967- 0.975 PPM Silanol (ppm): 0.0 = 600.0 D4: < 1000 ppm D5: < 100 ppm Packing 441 lb drum, 4 drums per pallet
Manganese carbonate is widely used as an additive to plant fertilizers to cure manganese deficient crops. In ceramics and glass, manganese carbonate acts as a glaze colorant and flux; it is also used in textile dyes, and varnishes, and in concrete stains. It's found in numerous metals and is used in the preparation of other manganese salts. Manganese carbonate is also applied for metal surface treatment and in the welding industry. Manganese Carbonate is also used in gemstones and it is also occasionally used in dry cell batteries. Manganese carbonate is an important source of manganese for the production of ferroalloys, which are alloys of iron and manganese. Manganese carbonate is employed as a pigment in various applications, including paints, coatings, and dyes. It can produce shades of pink, purple, and brown, depending on the concentration and the specific application. Manganese carbonate serves as a precursor for the production of other manganese compounds. It is used in the synthesis of manganese oxide, manganese sulfate, and other manganese-based chemicals. Sales Specification Manganese: 44% Min Sulphate:0.6% Max Chloride:0.05% Max Arsenic: 10 ppm Cadmium:5 ppm Cobalt: 275 ppm Lead: 80 ppm Zinc: 160 ppm Nickel: 70 ppm Moisture: 1% Max Manganese Dioxide (MnO2): 0.2% Max Particle Size Through 325 Mesh 97% Packing 50 Lb bag, 44 bags per pallet
