Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

Hms1 Metal Scrap

CPU Scrap

HONEY consist of mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminumbronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Different composition proportions are the first difference. Yellow brass is composed of about 60% or 70% copper; 30%-40% zinc, and trace amounts of tin and zinc. While red brass contains approximately 85% copper and 15% zinc, with very little tin and lead input properties name Brass honey scra category Brass honey melting point 905-932 ensile Strength, Ultimate 345 MPa ensile Strength, Yield 135 MPa use copper extraction, recycle

Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.

Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.

We are one of the leading exporters of Aluminum scraps such as Stainless Steel Scraps and we are looking for serious buyers who in need contact us. We have been in business for many years Stainless Steel Scraps 304Scrap Material: SS201,SS304,SS316Factories direct materialGrand: 1stWe supply Stainless Steel Scraps of 201,304,316 etcStainless Steel:Grade 304Grade 310Grade 316400 SeriesClean Grade 'A' 304 Stainless Steel Scrap with no attachments.Commodity: 304 Stainless Steel ScrapDescription of commodity: 304 Stainless Steel ScrapSpecificationNickel------------8% to 10%Chromium---------10% to 17%C---------------- 0.08%MN-------------- 2%SI-------------- 1%P--------------- 0.045%S--------------- 0.03% High quality stainless steel scrap 201,304,430 and 316 in stock factory price stainless steel scrap SS304 and 316 Specification

We are manufacturing, distributing and trading a comprehensive range of 99.9% Copper Honey Brass Scrap that conforms to international quality standard norms. We are the right choice for obtaining superior quality brass Scraps. Copper Scraps that we supply are on massive demand owing to their usage in fabrication of utensils, copper wires, alloys for different industries etc. apart others. Highly ductile and superior performance distinguishes them from other variants available in the markets. Quick Details : Place of Origin: Germany/Poland /Spain Brand Name: Brass Model Number: 99.9% Copper honey brass Scrap Type: Brass Honey Copper Content: 99.99% Supply Ability Different types of brass scraps that are used for recycling or for recovering pure brass, include - brass electrical parts, brass sanitary, brass pneumatic parts. TEST RESULT : Copper: 99.9% Carbon: 0.03% Phosphorus: 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003% Scrap Contains -Cables -Scrap Motor Winding wires -Bus Bar Strips, etc Used As A Raw Material In - Copper Wire Drawing Units - Foundries - Copper Utensils Manufacturing Units - Automobile Industries.

Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale

R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants

Alternators are essential electrical machines used to convert mechanical energy into alternating current (AC) electricity. Commonly found in vehicles, power plants, and industrial machinery, alternators provide reliable power generation by producing electricity to recharge batteries and power electrical systems. Known for their efficiency and durability, they are designed to handle varying loads, ensuring consistent power output. Built with high-quality components, alternators are crucial for maintaining the proper functioning of electrical systems in both small and large-scale applications.

HMS 1 & HMS 2 are high-quality scrap metals primarily composed of ferrous materials, including steel and iron. HMS 1 (Heavy Melting Steel 1) includes thicker, cleaner steel scrap, such as large structural steel, ship plates, and industrial scrap, while HMS 2 (Heavy Melting Steel 2) consists of smaller, lighter scrap materials, including old car bodies, appliances, and metal structures. Both grades are ideal for steel production and recycling, offering excellent value and reliable material for manufacturing industries.

Aluminium Ingot

Brass Scrap

Product Description Specification: Density: 2.702g/cm�³ Melting point: 660.37�ºC Boiling point: 2467.0�ºC Color: silver white Application: 1. Mainly used for melting ingot. 2. Used for industry such as automobile, pinning and weaving, electron broadly and so on. 3. Used to make cars, trains, subways, ships, airplanes, rockets, spaceships and other land and air vehicles to reduce the weight of the load. Detailed Photos

Applications: 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap Aluminum block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc. Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Features: Free from Nuts, Steel plate, paint Chemical Composition: AL Appearance: Silvery White

High purity copper ingot is a very special metal for us, as our activities encompass all aspects of the copper business, ranging from mining through smelting to fabricating. Hereunder, we will examine our achievements in the purification of copper as an example of our purification research. The tables below show analytical results of impurities in the worldâ??s purest copper (6N: 99.9999%Cu). This analysis was conducted by Glow-Discharge Mass Spectrometry (GDMS), which allows microanalysis of all elements. The result indicates the ultra-purity of the copper, proving that the quantities of all elements other than copper are below the detection limit. It is well known that ultra-high-purity metals possess very unique natures sharply different from those of ordinary metals. High purity copper ingot as adding elements can be directly applied in aviation, space atomic industrial super alloy, and the development of new alloy, as well as the analysis of the standard sample. It can also be through mechanical processing preparation into high purity copper foil shielding materials for atomic reactor.