CAS 108-94-1 HS code 2914220000 Cyclohexanone is an organic compound with the chemical formula C6H10O. It is a saturated cycloketone with carbonyl carbon atoms included in the six-membered ring. Colorless transparent liquid, with an earthy smell, containing traces of phenol, with a mint smell. Impurity for light yellow, with storage time generated impurities and color, water white to gray yellow, with a strong pungent smell. Mixed with air, the explosive pole is identical to the open-chain saturated ketone. In industry, it is mainly used as raw material and solvent for organic synthesis, such as it can dissolve cellulose nitrate, paint, paint and so on. Cyclohexanone is an important chemical raw material, which is the main intermediate in the manufacture of nylon, caprolactam and adipic acid. They are also important industrial solvents, such as paints, especially those containing nitrocellulose, vinyl chloride polymers and their copolymers or methacrylate polymers. Excellent solvent for organophosphorus insecticides and many similar pesticides, as a solvent for dyes, as a viscous solvent for piston-type aviation lubricating oil, as a solvent for grease, wax and rubber. It is also used as a homogenizing agent for dyeing and fading filaments, as a degreaser for polishing metals, and as a coloring and painting agent for wood. Used as a high boiling solvent in cosmetics such as nail polish. Mixed solvent is usually prepared with low boiling solvent and medium boiling solvent to obtain suitable evaporation rate and viscosity.
CAS : 127-19-5 HS code 2924199090 Package: 190KG*80drum,15.2tons/FCL 950KG*20IBC drum,19tons/FCL 20-22tons/ISO TANK Product Name Methylene-Chloride Dichloromethane-99.99% CAS NO:75--09--2 EINECS NO.: 200-838-9 Product properties Colorless liquid with characteristic odor. Relative density D4 1.326, Melting point-96.7C, Boiling point:40.4C.If it is mixed with high concentrated Oxygen, the explosive mixture is formed, but it is not inflammable.It is one of the low-boiling-point industrial solvents that have small toxicity, no inflammable. Product Applications Dichloromethane-has strong solubility and no toxicity etc advantages. It is wide used for manufacturing safety film and orthocarbonate and can also be used for solvent of paint, cleaner for metal, gas-fog spray agents po; yurethane foaming agent, mold-release agent, paint remover. Dichloromethane-is also used in the manufacture of photographic film and has been to remove caffeine-from coffee.
CAS 68-12-2 HS code 2924191000 Package: 190kg*80 drums,15.2ton/20'FCL; 190kg*132 drums,25.08ton/40'FCL; 21.5ton/ISO TANK. Application: 1. Used as good solvents on a variety of polymers such as polyethylene, polyvinyl chloride, pan, polyamide, etc. It can be used for acrylic fiber and other synthetic fibers of wet spinning, polyurethane synthesis; 2. Used in the plastic film; 3. Used for catalysts for chemical reactions; 4. Used as a gas absorber for separation and purification of gases in petrochemical industry. 5. Used to remove paint; it can also dissolve some of the low solubility of the pigment, so that the characteristics of dyes with dyes; 6. Used in pesticide industry. It can be used for synthesis of iodine amine pyrimidine, doxycycline, cortisone, vitamin B6,antitumor ammonia acid, furosemide fluorouracil, bile dimension he, etc.
Packaging: 300kg*80drums, 24ton/FCL(With or without pallets); Hydrobromic acid is a strong acid formed by dissolving the diatomic molecule hydrogen bromide (HBr) in water. "Constant boiling" hydrobromic acid is an aqueous solution that distills at 124.3 �°C (255.7 �°F) and contains 47.6% HBr by mass, which is 8.77 mol/L. Hydrobromic acid has a pKa of â??9, making it a stronger acid than hydrochloric acid, but not as strong as hydroiodic acid.Hydrobromic acid is one of the strongest mineral acids known.
CAS 64-17-5 HS code 2207100000 Packing&Shipping Packing in iron drums: 160KG/IRON DRUM, 80 IRON DRUMS , without pallets, 12.8 Tons/20'FCL; 160KG/IRON DRUM, 152 IRON DRUMS , without pallets, 24.32 Tons/40'FCL; Packing in IBC drums: 800KG/IBC DRUM , 20 IBC DRUMS,(without pallets),16Tons/20'FCL; 800KG/IBC DRUM , 32 IBC DRUMS,(without pallets),25.6Tons/40'FCL Packing in ISO TANKs: 18.5 Tons / ISO TANK Shipping: within 12 days after T/T in advance payment Edible alcohol (edible Alcohol) is also called fermented distilled wine. It is mainly made of potatoes, grains and sugars as rawmaterials through cooking, saccharification and fermentation. It is used in food industry. Its flavor features are divided intofour parts: color, fragrance, taste and body. That is to say, the content of aldehyde, acid, ester and alcohol in distilled wine.Different tastes and gases will make distilled wine Different flavors of In terms of the quality of edible alcohol products, grainalcohol is the best, followed by potato alcohol, and molasses alcohol is the worst. Edible alcohol is the product obtained byfiltering and rectifying food and yeast after fermentation in the fermentation tank. It is usually the aqueous solution ofethanol, or the mutual solution of water and ethanol. The purity of alcohol is usually 96%. Used as Disinfectant in Hospitals and home Used as solvent for resins and varnish and inks Used as Fuel Used in Laboratories Ethanol has many USES. First of all, ethanol is an important organic solvent, widely used in medicine, paint, sanitary products, cosmetics, oils and other fields. Secondly, ethanol is an important basic chemical raw material, which is used for manufacturing acetaldehyde, ethylamine, ethyl acetate, acetic acid, etc., and derives many intermediates of medicine, dye, paint, perfume, synthetic rubber, detergent, pesticide and other products. Thirdly, 75% ethanol aqueous solution has strong bactericidal ability and is a commonly used disinfectant in medical treatment.Finally, similar to methanol, ethanol can be used as an energy source. In 2017, various ministries and commissions in China jointly issued relevant policies to promote the nationwide use of vehicle ethanol-fueled gasoline
Cas 79-03-8 Hs code 2915900090 Package 250kg/drum 20ton/20feet container 25ton/40feet container Physical and chemical properties: Propionyl chloride is an acyl chloride of propionic acid and can undergo reactions that occur with acyl chloride. It is a colorless, corrosive and volatile liquid. Chemical properties Colorless liquid with pungent odor. Soluble in ethanol.
CAS No.: 624-92-0 HS code 2930909099 PACKAGE & STORAGE Sodium Dimethyl Disulfide (DMDS) packing:200kg net packed in steel drum; ISO Tank Chemical Name: Dimethyl Disulfide ( DMDS ) Other name: CH3S)2; (Methyldisulfanyl)methane; (Methyldithio)methane; 2,3-dithiobutane; ai3-25305; dimethyldisulfane; Disulfide,dimethyl disulfide. CAS: 624-92-0 EINECS No.: 210-871-0 Formula: C2H6S2 Molecular Weight: 94.2 Purity: 99.7% Appearance: Colorless or light yellow liquid Dimethyl disulfide is a synthetic, insoluble in water, colorless or light yellow chemical reagent with toxicity.
CAS : 71-43-2 HS Code : 2902200000 Packing : 180KG/drum 14.4MT(1*20) ISO tank 21MT Application Benzene is pure benzene. Benzene is a chemical substance. Its formula is C6H6. It is one of the most important basic organic raw materials and a representative of aromatic hydrocarbons. It has a relatively stable six-membered ring structure. With high refraction and strong aroma, flammable, toxic. Miscible with ethanol, ether, acetone, carbon tetrachloride, carbon disulfide and acetic acid, slightly soluble in water. It is not corrosive to metals, but sulfur containing impurities in lower grades of benzene have obvious corrosion effects on copper and some metals. Liquid benzene has a degreasing effect and can be absorbed by the skin and poisoned, so contact with the skin should be avoided.
CAS : 141-32-5 HS Code : 2916123001 Packing : 180KG/drum 14.4MT(1*20) ISO tank 21MT Used as organic synthesis intermediates, adhesives, emulsifiers, coatings. Oleic acid and its esters are widely used in industry.In the process of using, acrylic esters are often synthesized into polymers or copolymers. Butyl acrylate (and methyl ester, ethyl ester, 2 - ethyl ester) belong to the soft monomer, and can be all kinds of hard monomers such as methyl methacrylate, styrene, acrylonitrile and vinyl acetate, etc., and sensuality monomer (methyl) hydroxyl ethyl ester, hydroxypropyl acrylate and glycidyl ester, (methyl) acrylamide and derivatives such as copolymerization, crosslinking, grafting, etc., made in 200 - more than 700 kinds of acrylic polymer products (mainly emulsion and solvent type and water soluble) Used in coating, adhesive, acrylic fiber modification, plastic modification, fiber and fabric processing, paper treating agent, leather processing and acrylic rubber etc.
Application N-Hexane is an organic compound with a chemical formula of C6H14. It belongs to straight-chain saturated aliphatic hydrocarbons. It is a colorless liquid, insoluble in water, soluble in most organic solvents such as ethanol, ether, acetone, and chloroform. It is mainly used as a solvent, chromatographic Analysis of reference substances, paint thinners, media for polymerization reactions, etc., can also be used in organic synthesis.
Acetona is an important raw material for organic synthesis, which is used in the production of epoxy resin, polycarbonate, plexiglass, medicine, pesticide, etc. It is also a good solvent for coatings, adhesives, cylinder acetylene, etc. Also used as diluent, cleaning agent, extractant. It is also an important raw material for manufacturing acetic anhydrides, diaceton alcohol, chlorofor, iodoforms, epoxy resin, polyisoprene rubber, methyl methacrylates, etc. It is used as solvent in smokeless powder, celluloid, acetate fiber, spray paint and other industries. It is used as extractant in oil industry. It is used to produce organic chemical raw materials such as organic glass monomer, bisphenol A, diaceton alcohol, hexanediol, methyl isobutyl ketones, methyl isobutyl methanos, folone, isophorone, chloroforms, iodoforms, etc. It is used as an excellent solvent in coating, spinning process of acetate fiber, acetylene storage in steel cylinder and dewaxing in oil refining industry.
Acrylicacid is a colorless liquid with a pungent odor corrosive and strong acidity Soluble in water ethanol and ether but also soluble in benzene acetone chloroform etc The melting point is 135C the boiling point is 1409C and the density 204C is 10611gcm3 The chemical nature is lively It is easy to polymerize in air and can be reduced to propionicacid by hydrogenation Addition with hydrogen chloride generates 2 chloropropionicacid Item Grade Test Result Purity 995 9981 Colour Hazen 10 10 Water Content 020 0092 Inhibitor ContentMEHQ mm106 20020 194 Item Standard Product Name Acrylic AcidAA Purity 99 CAS NO 79107 EINECS No 2011779 Appearance Transparent liquid Molecular Formula C3H4O2 Melting point 13 C Boiling point 1409 C Solubility Soluble in water Density 1051 gcm Application Preparation of acrylic resin etc 1 Acrylicacid and its esters can be used as polymer monomers 2 It can be used as a raw material for adhesives coatings resins etc 3 Resins synthesized by acrylicacid can be used in pharmaceutical leather textile paper chemical fiber rubber building materials plastics packaging materials water treatment oil exploration and other industries
pplication Trichloroethylene is an organic compound with the chemical formula C2HCl3. It is a colorless transparent liquid formed by the substitution of three hydrogen atoms in ethylene molecules by chlorine. It is insoluble in water, soluble in ethanol and ether, and can be mixed with most organic solvents. It is mainly used as a solvent and can also be used for degreasing, freezing, pesticides, spices, rubber industry, washing fabrics, etc. Protective measures Skin contact: Immediately remove contaminated clothing and thoroughly rinse the skin with soap and water. Seek medical attention. Eye contact: Lift the eyelids and rinse with flowing water or physiological saline. Seek medical attention. Inhalation: Quickly remove from the scene to a place with fresh air. Maintain unobstructed respiratory tract. If breathing is difficult, administer oxygen. If breathing stops, immediately perform artificial respiration. Seek medical attention. Ingestion: Drink plenty of warm water to induce vomiting. Seek medical attention.
Dimethyl sulfoxide (DMSO) is an organosulfur compound with the formula (CH3)2SO. This colorless liquid is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water. It has a relatively high boiling point. DMSO has the unusual property that many individuals perceive a garlic-like taste in the mouth after contact with the skin. In terms of chemical structure, the molecule has idealized Cs symmetry. It has a trigonal pyramidal molecular geometry consistent with other three-coordinate S(IV) compounds, with a nonbonded electron pair on the approximately tetrahedral sulfur atom. Application 1. Used for aromatic extraction, resin and dye reaction medium, acrylic polymerization and solvent extraction. 2. Organic solvents, reactive media and organic synthesis intermediates. 3. Used as analytical reagent and gas chromatographic stationary liquid, and also used as solvent during uv spectrum analysis. 4. Transdermal accelerator. 5. Antifreeze Function 1.DMSO is colorless, odorless and transparent liquid at room temperature. 2.DMSO is a kind of moisture absorption combustible liquid. 3.DMSO has characteristics of high polarity, high boiling point, non-proton, mixed with water, low toxicity and good heat stability. 4.DMSO is soluble in ethanol, propanol,and many organic matters. It was known as"Omnipotent Solvent"
Sorbic Acid Potential Functions: Beverages Cosmetics & Pharmaceuticals Food Industrial & General Sports Nutrition Potential Functions: Preservative Potential Applications: Alcoholic Drinks Meat, Fish & Poultry Protein Drinks Bakery Non-Alcoholic Drinks Protein Powders Confectionary Paints Ready Meals Dairy Personal Care Skin Care Health Care Pet Food Snack Foods