R50- R65 - IRSI CODES;
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65
Chemical Composition Used Rails;
C: 0, 54 - 0,82
Si: 0,18-0,40
Mn: 0, 60-1, 05
S: 0.04 max
P: 0,035 max
As.: 0, 01 max of Mass share
Norms: R-50 GOST7173-75 and R-65 GOST-8165-75
The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)
Used Rail ISRI 27-29 ISRI-CODES;
(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under.
(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.
The rails can be cut to the length the buyer wants
Heavy Melting Steel (HMS):
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density.
The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.
Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%.
Chemical Composition:
C:0.06 â?? 0.082%
Mn:0.75 â?? 1.05%
SI:0.13 â?? 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
-Aluminium wire scrap
-Reasonable price and high purity
-Timely delivery and promptly shipping
-Fire deals
Aluminium scrap 6063
Aluminium profile scrap 6063
Aluminum content 75%, 95%, 99.7%
Aluminium content 75%, 95% 99.7% or can satisfy the demands of the customer
5688 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Applications:
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap
Aluminum block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted
auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc.
Aluminum scrap
Density: 2.702g/cm
Melting point: 660.37
Boiling point: 2467.0
Features: Free from Nuts, Steel plate, paint
Chemical Composition: AL
Appearance: Silvery White
With strap, mirror pockets, zipper, and reflective strip
Company overview
Huaqi industrial(Member of Anma Group) is professional in the manufacture and sale of automotive supplies, automotive modified parts, auto parts. Products are exported to Europe and the United States, the Middle East, Southeast Asia, more than 40 countries and regions, currently has more than 350 agents and co-clients, mainly supply include AUTOZONE, TESCO, K-MART, ALDI, BDK, SUPERCHEAP and other internationally renowned chain stores, export business is growing. 2019 the company's total export business amount over $86 million(about RMB650million).
4 WAYS TO BUILT "ONE-STOP" SERVICE
1) Our Group company has owned 4 factories in Zhejiang to produce 30% of Car Accessories including car mats, seat covers, steering wheel covers, car covers, sunshade, booster cable, etc
2) Over 300+ high quality factories cooperated with Anma Group over 10 years relationship to provide 25% of rest car accessories.
3) Our Group company has invested over 28 factories as a shareholder to control another 30% key products of car accessories.
4) We work for factories as the exclusive export agent to help them sell and develop their products. At the same time, those factories ' products built 15% of Our Car Accessories.LE REASONS
Our hail protection convinces with strong improvement thanks to years of experience in the field of hail protection and offers the
ideal protection against hail and other weather influences for all motorists without a covered parking space or fixed garage.
Factory Cheap Cash Register Paper Thermal Paper Roll All Sizes Thermal Paper Jumbo Roll For Pos.
Weight: 48gsm, 55gsm, 60gsm, 65gsm, 70gsm
Description :
High bulk, good stiffness
High brightness with less dust, well appearance
Super white at least 3 years image life
High density on color development, high clarity on printing
Well strength, better ink absorption, could be processed after-printing
Never stick on printhead, greatly extended the service life of printhead
Using high quality raw materials, strictly quality control and keep stable quality
Our products 57mm*48mm thermal paper rolls are a common paper roll size for credit card terminal printers.
It is widely used for every market. Below is detail information for this product.
MODEL # T574801
Product Description:
Type: Single White Thermal Paper
Roll Width: 57mm
Roll Diameter: 48mm
Weight: 55gsm
Length:25meters
Core size:13mm*19mm paper core
Package: 10rolls shrink-wrapped ,100rolls per carton
Carton size: 246mm*246mm*234mm
Duration: 3years
End of paper roll with red warning line
100% lint free paper reduces printer jams
Specifications for Thermal Sensitive paper:
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Electro copper Cathode Top Grade 99.99%
Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard)
1. Weight of each sheet: 125kgs (+/- 1%)
2. Net weight of each pallet: 2mts (+/- 1%)
3. Min. weight in each container: 20mts approx.
4. Gross weight of each container: 22.20mts approx.
5. Copper (Cu) min% 99.99%-99.97% min
Packing: Palletized banded by aluminum bands
CONTACT TO PLACE AN ORDER
1.Detailes:
1).Weight: 125kg per sheet
2).Purity: 99.99%-99.97% min
3)..High quality, best price
4).COA, SGS certificate
5).Long term supply
2.Usage
Electric light industry, machinery manufacturing, Building industry ,defense industry,
and other fields Manufacturing industrial .
valves and fittings,Instrument sliding bearing.
3.Packing & Delivery
1).Packing:Weight of each sheet: 125kgs (+/- 1%),Net weight of each pallet: 2mts (+/- 1%),Min. weight in each container: 20mts approx,Gross weight of each container: 22.20mts approx.
2).Delivery:Within 7-10 days after received your prepayment
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Electro copper Cathode Top Grade 99.99%
Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard)
1. Weight of each sheet: 125kgs (+/- 1%)
2. Net weight of each pallet: 2mts (+/- 1%)
3. Min. weight in each container: 20mts approx.
4. Gross weight of each container: 22.20mts approx.
5. Copper (Cu) min% 99.99%-99.97% min
Packing: Palletized banded by aluminum bands
CONTACT TO PLACE AN ORDER
1.Detailes:
1).Weight: 125kg per sheet
2).Purity: 99.99%-99.97% min
3)..High quality, best price
4).COA, SGS certificate
5).Long term supply
2.Usage
Electric light industry, machinery manufacturing, Building industry ,defense industry,
and other fields Manufacturing industrial .
valves and fittings,Instrument sliding bearing.
3.Packing & Delivery
1).Packing:Weight of each sheet: 125kgs (+/- 1%),Net weight of each pallet: 2mts (+/- 1%),Min. weight in each container: 20mts approx,Gross weight of each container: 22.20mts approx.
2).Delivery:Within 7-10 days after received your prepayment
Hot Selling Aluminium Ingot A7 99.7% & A8 99.8% best Price
Aluminium Ingot A7 99.7% And A8 99.8%. Once the aluminum scrap is collected and sorted, it is placed into a melting furnace and turned into molten aluminum at temperatures ranging from 1300 to 1400 degrees Fahrenheit. This molten aluminum cast into large slabs called ingots or billets. And since aluminum never loses its performance or strength during the recycling process, the same piece of aluminum can enter the secondary production process time and time again, multiplying the cost savings and environmental benefits. Not only does secondary aluminum production use less energy, it reduces landfill waste, contributes much lower greenhouse gas emissions and greatly reduces costly international transportation.
The container has been designed and constructed for the transportation of general cargo on sea(above or under deck) and on land (road or rail) throughout the world, and suitable for the environmental conditions imposed by those modes of transport. All the material used in the construction are able to withstand extreme temperature ranging from -40�°C(-40�°F) to 70�°C(158�°F) without effect on container's strength and watertightness.
SECOND HAND USED OFFICE & CARGO SHIPPING CONTAINERS FOR SALE
The 40ft ship container for sale is made of high steel and able to withstand extreme temperature ranging from -40 �°c ~ 70�°c, and all have been certified by major Classification Society (CCS,BV,ABS,GL) completely conforming to International Standard
Advantage
High sealing quality Gaps are fully welded
Good appearance with competitive price
Multifunction to meet customer demands
With strong astigmatic resistance
With great air tightness and water-resistance
Design for your specific instruction
5688 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
