Sodium Tetraborate Decahydrate is more popularly known as Borax10 mol. It is often used as a buffering agent. Borax decahydrate is utilized as a cleaning agent, especially for laundry purposes. Researchers may employ borax for surface treatment purposes, such as cleaning, etching, or modifying the surface properties of materials. Borax decahydrate serves as a preservative and pH buffer. It helps extend the shelf life of certain products and maintains their desired pH levels. Borax 10 mol is the least concentrated sodium borate product, because it has the most bound water (10 molecules). It is found in detergents, and personal care products. It is used to make glass, ceramics, and insulation. It is a flux in metal recovery, wire drawing and refractories. It is also a corrosion inhibitor in automotive antifreeze, and a preservative in casein-based adhesives.
Sales Specifications
Appearance: White, granular, crystalline solid
Grades: Technical Standard
Description: The surface of the crystal is usually chalk white as a result of partial loss of water of hydration.
Decahydrate Borax (Na2B4O7*10H2O): 100%min.
Anhydrous Borax (Na2B4O7): 52.8%min.
Boric Oxide (B2O3): 36.5%min.
Sodium Oxide (Na2O): 16.3%min.
Water of Crystallization (H2O): 47.2%max.
Chloride (Cl): 200ppm max.
pH in Water at 20C(68F):
Weight 0.1%: pH 9.24
Weight 0.5%: pH 9.23
Weight 1.0%: pH 9.23
Weight 2.0%: pH 9.24
Weight 3.0%: pH 9.27
Weight 4.78%(Saturation): pH 9.32
Physical And Chemical Properties
Specific Gravity 25C: 1.73
Specific Heat 25C: 147 cal/deg-mol
Heat of Solution (Absorbed) 18C: -2.589Kcal/g-mol or -102.59Btu
Heat of Formation: -1503.0 Kcal/g-mol or -5964.7 Btu
Borax Anhydrous has a wide variety of uses. It is a component of many detergents, cosmetics, and enamel glazes. It is also used to make buffer solutions in biochemistry, as a fire retardant, as an anti-fungal compound for fiberglass, as a flux in metallurgy, neutron-capture shields for radioactive sources, texturing agent in cooking, and as a precursor for other boron compounds.
Borax Anhydrous, is the most concentrated sodium borate product because it has no bound water. It is used to manufacture heat resistant glass, high-quality glass, refractories and enamel glazes requiring high color standards.
Sales Specifications
Boric Oxide (B2O3): 68.5 % Min
Equivalent Borax (Na2B4O7): 99.0 % Min
Sodium Oxide (Na2O): 30.5 % Min
Sulfate as SO4: 150 ppm Max
Total Iron (Fe): 50 ppm
U.S. Standard Sieve No.: 2 % max
Benzene sulfonyl chloride as Starting material for Violet 23 & cobaltphthalocyanine dye. It is also used in Intermediate for agrochemicals . Benzene Sulfonyl chloride is used in the manufacture of BenzeneSulfonamide, surface active agents, sulfa drugs, esters by dehydration for perfumery products, lubricating oil additives. Benzene Sulfonyl chloride is used in Promoter in low hysteresis processing of carbon black rubber mixes. Benzene Sulfonyl chloride is used in Improvements in the production of polymerization products using halogen compounds to increase the effectiveness of sulfonation during polymerization. It also is used as Catalyst in furan resins. Benzene Sulfonyl chloride is used as brightening additive for nickel electroplating.
1-Bromopentane is a chemical reagent used in a multitude of organic syntheses. It is used iron-catalyzed alkylations of aromatic Grignard reagents via cross coupling. It is used in the synthesis of-diketo acids as reversible inhibitors of Hepatitis C virus NS5bRNA polymerase.
Ascorbyl Palmitate commonly used in the food industry as a natural preservative for oils, vitamins and colors. It is used in baking as an antioxidant or preservant to improve product shelf life of fat-based systems, like frostings and fillings. It may also be used as a functional ingredient to enrich foods with vitamin C. Ascorbyl Palmitate also serves to regenerate Vitamin E creating a synergy of anti-oxidant activity. Used mainly in infant formula, vegetable oils, cosmetics, animal fats and pharmaceutical products.
Sales Specifications
Appearance: White or yellowish-white powder
Assay: 98.0% 100.5%
Identification: Meet the requirements
Appearance of solution: Clear, not more intense than BY4
Specific Optical Rotation: Between +21 and +24
Loss on drying: 0.8% Max.
Sulphate ash: 0.1% Max.
Heavy metals: 10ppm. Max
Residue on ignition: 0.1% Max.
Organic Volatile impurities: Meet the requirements
Lead: 1 ppm Max.
Quality Standard: Meet the standard of BP 2004/NF23/FCCV.
Ascorbic Acid USP/FCC is used in the Food and beverage industry as a preservative, antioxidant, and flavoring agent in various products such as fruit juices, soft drinks, and breakfast cereals. It is also used in Skincare and cosmetics as an active ingredient in anti-aging products and to brighten and even out skin tone. It is used in Water treatment as a reducing agent to remove chlorine and other chemicals from water. Ascorbic Acid can also be used in Photography: as a developing agent in film and photography. It is used in Horticulture as a plant growth enhancer and to protect plants from environmental stress. Ascorbic Acid is also used in cleaning products as a stain remover. It is also used to remove rust from metal surfaces.
Sales Specifications
Appearance: White crystalline powder
Identification: Positive
Clarity of Solution: Clear
Color of Solution: BY7
Assay: 99.0 -100.0%
Loss on Drying: 0.4%
Residue on Ignition: 0.1%
Sulfate Ash: 0.1%
Specific Rotation: +20.5 ~ +21.5
pH(with 2% water solution): 2.4 - 2.8
pH(with 5% water solution): 2.1 -2.6
Melting Range: about 190C
Heavy Metals: 3ppm
Iron: 2ppm
Copper: 5ppm
Oxalic Acid: 0.2%
Arsenic: 1ppm
Lead: 2ppm
Cadmium: 1ppm
Mercury: 1ppm
Organic Volatile Impurities: Meets the Requirements
Related Substances:
ImpurityC 0.15%
ImpurityD 0.15%
Any Other Unspecific Impurities
Impurity 0.10%
Total Impurity 0.2%
Total Plate Count: 1,000cfu/g
According to BP2010, E300, USP32, FCC7, EP7
Packing
55.12 LB per carton, 40 cartons per pallet
Applications
Aromatic 100 is also used in industrial applications such as fuel additives, paints and coatings, industrial cleaning, mastics and sealants, and process fluids.
Specifications
Total Aromatics: 99% Min
Benzene Clac.: 50 PPM Max
Pseudocumene: 45.0% Max
Hazardous Air Pollutants (HAPS): 3.5% Max
Initial Boiling Point: 300F Min
Dry Point: 355oF Max
Flash TCC: 107oF Min
Mixed Aniline Point: 57oF Max
Kauri Butanol Solvency: 90 Min
Density (@60oF): 0.870 -0.878
API Gravity: 29.5 - 31.3oAPI
Color, Saybolt: 28 Min
Total Sulfur: 5 g/kg Max
Copper Corrosion Aromatics:
Ammonium Hydroxide has various application but its top uses are, as an ingredient in many cleaning products, as a precursor to alkylamines, it is also used as a refrigerant gas because it absorbs heat from its surroundings, it is uses in water and waste water treatment as a stabilizer, it is used in to make ammonium nitrate fertilizer. It is also used for furniture darkening and for treatment of straw for cattle. It is used in the manufacturing of papers, rubbers, ammonia soaps, detergents, pharmaceutical products, fireproofing woods, inks, ceramics, and ammonium compounds. It is also utilized in metal extraction and a neutralizing agent for acids. It is used in the textile industry and a mordant. It is used in cosmetic products to neutralize the acidity of the product.
Sales Specifications
Assay: 25.00 % Min
Specific Gravity: NS (ppm)
Carbonate: 0.002 % Max
Chloride: 0.5 ppm Max
Sulphate: 2 ppm Max
Sulphide: 0.1 ppm Max
Arsenic: 0.05 ppm Max
Iron: 0.2 ppm Max
Phosphate: 1 ppm Max
Calcium: 4 ppm Max
Copper: 0.1 ppm Max
Lead: 0.4 ppm Max
Magnesium: 4 ppm Max
Potassium: NS (ppm)
Sodium: NS (ppm)
Zinc: Oxygen Absorbed: Passes Test
Pyradine & Homologues: Passes Test
Silicate (SiO2): 10 ppm Max
Residue on Evaporation: NS (ppm)
Total Dissolved Solids: NS (ppm)
Chemical Oxygen Demands: NS (ppm)
Ammonium fluoride is used for etching and frosting of glass, preservation of food and in woods, in printing textile, and as mothproofing agent. It is used in chemical analysis and as an antiseptic in brewing beer. It has also been used in commercial uses like, building materials, printing and dying textiles and in semiconductors. It has also been used in site-limited use as a surface treatment (for metal and non-metal surfaces), and as an intermediate in manufacturing.
Specifications
Appearance: White Needle Crystal
Purity: 96.0% Min
(NH4)2SiF6: 0.6% Max
SO4: 0.1% Max
Ignition Residue: 0.2% Max
Chloride: 0.05% Max
Silicate: 0.2% Max
Iron: 0.02% Max
Heavy Metal (as Pb): 0.02% Max
Packing
55.12 LB Bag, 28/29 bags per pallet
DOT Transportation
Shipping Name: Ammonium Fluoride
Hazard Class: 6.1
UN Number: 2505
Packing Group: III
Sales Specifications
Appearance: Crystal
Color: White
Assay: 97.5% Min
Sulfate (SO4): 0.10% Max
Lead (Pb): 0.01% Max
Anti- Caking agent: 1.0 â?? 2.0%
Iron (Fe): 0.05% Max
Moisture (H2O): 0.2% Max
Packing
286.60 LB Drum, 4 Drums per pallet
DOT Transportation
Shipping Name: Corrosive solid, acidic, inorganic, n.o.s.(ammonium fluoborate)
UN Number: 3260
Packing Group: III
Hazard Class: 8
Physical And Chemical Properties
The pH of a 5% aqueous solution of Ammonium Bifluoride is 3.5. In aqueous solution it releases 0.35 pounds of hydrofluoric acid per pound of Ammonium Bifluoride. In strong acid solutions, Ammonium Bifluoride releases 0.70 pounds of hydrofluoric acid per pound. Since the product absorbs heat when aqueous solutions are prepared, it is often advisable to use warm water. Additional properties are listed below.
Melting Point: 258 F (126 C)
Boiling Point: 462 F (239 C)
Specific Gravity: 1.5
Solubility in Water (25C): 41.5% by weight
Sales Specification
Content(NH4HF2): 98.0% min
(NH4)2SiF6: 2.0% max
Loss on drying: 1.0% max
Residue on ignition: 0.2% max
Sulfate (based on SO4): 0.1% max
Packing
50 LB Bag, 44 bags per pallet
DOT Transportation
UN Number.: 1727
Proper Shipping Name: Ammonium Bifluoride, Solid
Hazard Class: 8
Packing Group: II
Applications
Ammonium Bicarbonate is used as a raising agent in flat baked goods such as cookies and crackers and other similar applications inthe food industry. Ammonium bicarbonate can also be used in the manufacturing of plastics and rubbers as a fire retardant. In the fertilizer industry, Ammonium Bicarbonate can be used as an inexpensive source of ammonia.
Physical And Chemical Properties
Physical State: White crystal with slight ammonia odor
Melting Point: 107-108�°C (Decomposes 36-60 C)
Specific Gravity: 1.59
Solubility in Water: 17.4% at 20 C
PH: 7.8
NFPA Ratings: Health: 1; Flammability: 0; Reactivity:0
Stability: Stable under ordinary conditions
Sales Specification
NH4HCO3 (Purity): 99.20 % â?? 100.50 %
Chloride (as Cl): 0.003 % Max
Sulphate (compound of sulfur as SO4): 0.007 % Max
Non-Volatile Substances: 0.05 % Max
Arsenic (As): 0.0002 % Max
Lead (as Pb): 0.0002 % Max
Sales Specifications
Appearance: White
Purity: 99% Min
Al203 amount: 17% Min
Fe203 amount: 0.05% max
Water insoluble substance: 0.2% max
pH: 3.10 min
Dimension: 0-2 mm
Arenic (As): 14mg/kg Al Max
Cadmium (Cd): 3mg/kg Al Max
Chrome (Cr): 30mg/kg Al max
Mercury (Mg): 4mg/kg Al max
Nickel (Ni): 20mg/kg Al max
Lead (Pb): 40mg/kg Al Max
Antimony (Sb): 20mg/kg Al Max
Selenium (Se): 20mg/kg Al
Packing
50 lb bag, 44 bags per pallet
2204.60 lb super sack
Specifications
Total Al2O3 (%w/w) : 8.2-8.3
Total Al2(SO4)3 (%w/w) : 27.9%
Free Acid (as H2SO4,%w/w) : 0.0
Free Alumina (%w/w) : None
Fe2O3 (%w/w) : <0.35
Specific Gravity (15C) : Report
Insolubles (%w/w): < 0.2
Crystals (23C) : None
Color :Yellow to Water White
Clarity: clear to slightly opaque
Product Description : Colorless solution free of suspended or undissolved solids. Meets ANSO Specifications.
Packing
605 LB Drum, 4 drums per pallet
DOT Transportation
UN Number : 3264
Proper Shipping Name: Corrosive liquid, acidic, inorganic, n.o.s. (Aluminum Sulfate)
Hazard Class : 8
Packing Group : III
Applications
Aluminum Chlorohydrate (ACH) is used as a flocculant and used as a coagulant in water purification. It can also be used in the Paper industry as a Sizing agent (AKD) of the precipitation agent, Size adhesive, Anionic garbage removal agent, Retention aid agent and filter aid agent and as additive for controlling resin obstacles.
Sales Specifications
Appearance: White
Purity: 99% Min
Al203 amount: 17% Min
Fe203 amount: 0.05% max
Water insoluble substance: 0.2% max
pH: 3.10 min
Dimension: 1-6 mm
Arenic (As): 14mg/kg Al Max
Cadmium (Cd): 3mg/kg Al Max
Chrome (Cr): 30mg/kg Al max
Mercury (Mg): 4mg/kg Al max
Nickel (Ni): 20mg/kg Al max
Lead (Pb): 40mg/kg Al Max
Antimony (Sb): 20mg/kg Al Max
Selenium (Se): 20mg/kg Al
Packing
50 lb bag, 44 bags per pallet
2204.60 lb super sack
Aluminum Sulfate Powder
WCode: 01-012-02
Sales Specifications
Appearance: White
Purity: 99% Min
Al203 amount: 17% Min
Fe203 amount: 0.05% max
Water insoluble substance: 0.2% max
pH: 3.10 min
Dimension: 0-2 mm
Arenic (As): 14mg/kg Al Max
Cadmium (Cd): 3mg/kg Al Max
Chrome (Cr): 30mg/kg Al max
Mercury (Mg): 4mg/kg Al max
Nickel (Ni): 20mg/kg Al max
Lead (Pb): 40mg/kg Al Max
Antimony (Sb): 20mg/kg Al Max
Selenium (Se): 20mg/kg Al
Packing
50 lb bag, 44 bags per pallet
2204.60 lb super sack
Applications
Aluminum Chlorohydrate (ACH) is used as a flocculant and used as a coagulant in water purification. It can also be used in the Paper industry as a Sizing agent (AKD) of the precipitation agent, Size adhesive, Anionic garbage removal agent, Retention aid agent and filter aid agent and as additive for controlling resin obstacles.
