Ascorbic Acid USP/FCC is used in the Food and beverage industry as a preservative, antioxidant, and flavoring agent in various products such as fruit juices, soft drinks, and breakfast cereals. It is also used in Skincare and cosmetics as an active ingredient in anti-aging products and to brighten and even out skin tone. It is used in Water treatment as a reducing agent to remove chlorine and other chemicals from water. Ascorbic Acid can also be used in Photography: as a developing agent in film and photography. It is used in Horticulture as a plant growth enhancer and to protect plants from environmental stress. Ascorbic Acid is also used in cleaning products as a stain remover. It is also used to remove rust from metal surfaces. Sales Specifications Appearance: White crystalline powder Identification: Positive Clarity of Solution: Clear Color of Solution: BY7 Assay: 99.0 -100.0% Loss on Drying: 0.4% Residue on Ignition: 0.1% Sulfate Ash: 0.1% Specific Rotation: +20.5 ~ +21.5 pH(with 2% water solution): 2.4 - 2.8 pH(with 5% water solution): 2.1 -2.6 Melting Range: about 190C Heavy Metals: 3ppm Iron: 2ppm Copper: 5ppm Oxalic Acid: 0.2% Arsenic: 1ppm Lead: 2ppm Cadmium: 1ppm Mercury: 1ppm Organic Volatile Impurities: Meets the Requirements Related Substances: ImpurityC 0.15% ImpurityD 0.15% Any Other Unspecific Impurities Impurity 0.10% Total Impurity 0.2% Total Plate Count: 1,000cfu/g According to BP2010, E300, USP32, FCC7, EP7 Packing 55.12 LB per carton, 40 cartons per pallet
Applications Aromatic 100 is also used in industrial applications such as fuel additives, paints and coatings, industrial cleaning, mastics and sealants, and process fluids. Specifications Total Aromatics: 99% Min Benzene Clac.: 50 PPM Max Pseudocumene: 45.0% Max Hazardous Air Pollutants (HAPS): 3.5% Max Initial Boiling Point: 300F Min Dry Point: 355oF Max Flash TCC: 107oF Min Mixed Aniline Point: 57oF Max Kauri Butanol Solvency: 90 Min Density (@60oF): 0.870 -0.878 API Gravity: 29.5 - 31.3oAPI Color, Saybolt: 28 Min Total Sulfur: 5 g/kg Max Copper Corrosion Aromatics: Packing 410 LB drum
Ammonium Hydroxide has various application but its top uses are, as an ingredient in many cleaning products, as a precursor to alkylamines, it is also used as a refrigerant gas because it absorbs heat from its surroundings, it is uses in water and waste water treatment as a stabilizer, it is used in to make ammonium nitrate fertilizer. It is also used for furniture darkening and for treatment of straw for cattle. It is used in the manufacturing of papers, rubbers, ammonia soaps, detergents, pharmaceutical products, fireproofing woods, inks, ceramics, and ammonium compounds. It is also utilized in metal extraction and a neutralizing agent for acids. It is used in the textile industry and a mordant. It is used in cosmetic products to neutralize the acidity of the product. Sales Specifications Assay: 25.00 % Min Specific Gravity: NS (ppm) Carbonate: 0.002 % Max Chloride: 0.5 ppm Max Sulphate: 2 ppm Max Sulphide: 0.1 ppm Max Arsenic: 0.05 ppm Max Iron: 0.2 ppm Max Phosphate: 1 ppm Max Calcium: 4 ppm Max Copper: 0.1 ppm Max Lead: 0.4 ppm Max Magnesium: 4 ppm Max Potassium: NS (ppm) Sodium: NS (ppm) Zinc: Oxygen Absorbed: Passes Test Pyradine & Homologues: Passes Test Silicate (SiO2): 10 ppm Max Residue on Evaporation: NS (ppm) Total Dissolved Solids: NS (ppm) Chemical Oxygen Demands: NS (ppm) Packing 474 Lb. drum, 4 drums per pallet 1984.14 Lb. IBC tote DOT Transportation UN No.: 2672 Proper Shipping Name: Aqueous Ammonia (Ammonium Hydroxide) Hazard Class: 8 Packing Group: III RQ
Ammonium fluoride is used for etching and frosting of glass, preservation of food and in woods, in printing textile, and as mothproofing agent. It is used in chemical analysis and as an antiseptic in brewing beer. It has also been used in commercial uses like, building materials, printing and dying textiles and in semiconductors. It has also been used in site-limited use as a surface treatment (for metal and non-metal surfaces), and as an intermediate in manufacturing. Specifications Appearance: White Needle Crystal Purity: 96.0% Min (NH4)2SiF6: 0.6% Max SO4: 0.1% Max Ignition Residue: 0.2% Max Chloride: 0.05% Max Silicate: 0.2% Max Iron: 0.02% Max Heavy Metal (as Pb): 0.02% Max Packing 55.12 LB Bag, 28/29 bags per pallet DOT Transportation Shipping Name: Ammonium Fluoride Hazard Class: 6.1 UN Number: 2505 Packing Group: III
Sales Specifications Appearance: Crystal Color: White Assay: 97.5% Min Sulfate (SO4): 0.10% Max Lead (Pb): 0.01% Max Anti- Caking agent: 1.0 â?? 2.0% Iron (Fe): 0.05% Max Moisture (H2O): 0.2% Max Packing 286.60 LB Drum, 4 Drums per pallet DOT Transportation Shipping Name: Corrosive solid, acidic, inorganic, n.o.s.(ammonium fluoborate) UN Number: 3260 Packing Group: III Hazard Class: 8
Ammonium Chloride Coarse Mesh Untreated WC Code: 01-015-03 Sales Specifications Appearance: White to Slightly off White, Fine.to Coarse Crystalline Assay (% NH4CI): 99.0 pH (5%.Sol. @ 20�°C: 4.5 Min. â?? 6.0 Max. Moisture (% H2O): 0.5 Max. Lead (Pb, pprn): 4 Max. Identification A & B: Pass/Fail Packing 50 lb paper bag, 49 bags per pallet
Ammonium Chloride Feed Grade (Treated Material) WC Code: 01-015-01 Sales Specifications Assay ( NH4Cl): â?¥ 99.5 PCT Moisture: â?¤ 0.7 PCT Fe: â?¤ 0.001 PCT Heavy Metal (As Pb): â?¤ 0.0005 PCT Sulphate (As SO4): â?¤ 0.02 Residue on ignition: â?¤ 0.08 Ph Value: 4.0-5.8 Packing 50 lb paper bag, 44 bags per pallet or In 1000kg super sack.
Physical And Chemical Properties The pH of a 5% aqueous solution of Ammonium Bifluoride is 3.5. In aqueous solution it releases 0.35 pounds of hydrofluoric acid per pound of Ammonium Bifluoride. In strong acid solutions, Ammonium Bifluoride releases 0.70 pounds of hydrofluoric acid per pound. Since the product absorbs heat when aqueous solutions are prepared, it is often advisable to use warm water. Additional properties are listed below. Melting Point: 258 F (126 C) Boiling Point: 462 F (239 C) Specific Gravity: 1.5 Solubility in Water (25C): 41.5% by weight Sales Specification Content(NH4HF2): 98.0% min (NH4)2SiF6: 2.0% max Loss on drying: 1.0% max Residue on ignition: 0.2% max Sulfate (based on SO4): 0.1% max Packing 50 LB Bag, 44 bags per pallet DOT Transportation UN Number.: 1727 Proper Shipping Name: Ammonium Bifluoride, Solid Hazard Class: 8 Packing Group: II
Applications Ammonium Bicarbonate is used as a raising agent in flat baked goods such as cookies and crackers and other similar applications inthe food industry. Ammonium bicarbonate can also be used in the manufacturing of plastics and rubbers as a fire retardant. In the fertilizer industry, Ammonium Bicarbonate can be used as an inexpensive source of ammonia. Physical And Chemical Properties Physical State: White crystal with slight ammonia odor Melting Point: 107-108�°C (Decomposes 36-60 C) Specific Gravity: 1.59 Solubility in Water: 17.4% at 20 C PH: 7.8 NFPA Ratings: Health: 1; Flammability: 0; Reactivity:0 Stability: Stable under ordinary conditions Sales Specification NH4HCO3 (Purity): 99.20 % â?? 100.50 % Chloride (as Cl): 0.003 % Max Sulphate (compound of sulfur as SO4): 0.007 % Max Non-Volatile Substances: 0.05 % Max Arsenic (As): 0.0002 % Max Lead (as Pb): 0.0002 % Max Packing 55.12 lb bag 40 bags per pallet
Aluminum Sulfate Powder WCode: 01-012-02 Sales Specifications Appearance: White Purity: 99% Min Al203 amount: 17% Min Fe203 amount: 0.05% max Water insoluble substance: 0.2% max pH: 3.10 min Dimension: 0-2 mm Arenic (As): 14mg/kg Al Max Cadmium (Cd): 3mg/kg Al Max Chrome (Cr): 30mg/kg Al max Mercury (Mg): 4mg/kg Al max Nickel (Ni): 20mg/kg Al max Lead (Pb): 40mg/kg Al Max Antimony (Sb): 20mg/kg Al Max Selenium (Se): 20mg/kg Al Packing 50 lb bag, 44 bags per pallet 2204.60 lb super sack
Aluminum Sulfate Solution WC Code: 01-012-03 Specifications Total Al2O3 (%w/w) : 8.2-8.3 Total Al2(SO4)3 (%w/w) : 27.9% Free Acid (as H2SO4,%w/w) : 0.0 Free Alumina (%w/w) : None Fe2O3 (%w/w) :
CAS Number: 12042-91-0 Applications Aluminum Chlorohydrate (ACH) is used as a flocculant and used as a coagulant in water purification. It can also be used in the Paper industry as a Sizing agent (AKD) of the precipitation agent, Size adhesive, Anionic garbage removal agent, Retention aid agent and filter aid agent and as additive for controlling resin obstacles. Specifications Aluminum: 9.50Min â?? 10.0Max Specific Gravity: 1.240Min â?? 1.260Max Sulfates: Meets Specs Arsenic: Meets Specs Appearance: Meets Specs Odor: Meets Specs Packaging 2700 lbs/ tote
Aluminum Sulfate Granular WC Code: 01-012-01 Sales Specifications Appearance: White Purity: 99% Min Al203 amount: 17% Min Fe203 amount: 0.05% max Water insoluble substance: 0.2% max pH: 3.10 min Dimension: 1-6 mm Arenic (As): 14mg/kg Al Max Cadmium (Cd): 3mg/kg Al Max Chrome (Cr): 30mg/kg Al max Mercury (Mg): 4mg/kg Al max Nickel (Ni): 20mg/kg Al max Lead (Pb): 40mg/kg Al Max Antimony (Sb): 20mg/kg Al Max Selenium (Se): 20mg/kg Al Packing 50 lb bag, 44 bags per pallet 2204.60 lb super sack Aluminum Sulfate Powder WCode: 01-012-02 Sales Specifications Appearance: White Purity: 99% Min Al203 amount: 17% Min Fe203 amount: 0.05% max Water insoluble substance: 0.2% max pH: 3.10 min Dimension: 0-2 mm Arenic (As): 14mg/kg Al Max Cadmium (Cd): 3mg/kg Al Max Chrome (Cr): 30mg/kg Al max Mercury (Mg): 4mg/kg Al max Nickel (Ni): 20mg/kg Al max Lead (Pb): 40mg/kg Al Max Antimony (Sb): 20mg/kg Al Max Selenium (Se): 20mg/kg Al Packing 50 lb bag, 44 bags per pallet 2204.60 lb super sack
CAS Number: 12042-91-0 Applications Aluminum Chlorohydrate (ACH) is used as a flocculant and used as a coagulant in water purification. It can also be used in the Paper industry as a Sizing agent (AKD) of the precipitation agent, Size adhesive, Anionic garbage removal agent, Retention aid agent and filter aid agent and as additive for controlling resin obstacles. Specifications Aluminum: 9.50Min â?? 10.0Max Specific Gravity: 1.240Min â?? 1.260Max Sulfates: Meets Specs Arsenic: Meets Specs Appearance: Meets Specs Odor: Meets Specs Packaging 2700 lbs/ tote
Aluminium sulfate (Flocculant) Used as flocculant White pieces or granules Tablets(20g, 50g, 100g, 125g, 200g, 500g, etc) Prompt shipment within 3 weeks from order confirmation. Specfactions and Packaging can be made according to your requirements. Aluminum sulfate normal packaging 50kg Fibre drums. Various plastic drums in sizes such as 50kg, 45kg, 40kg, 30kg, 25kg, 20kg, 15kg, 10kg, 5kg, 2kg, 1kg, 0.5kg, etc. 25kg bags or 1000kg bags with pallets. Tablets can be packaged in 1kg bags or 1kg pots, then in 10kg to 50kg plastic drums. 0.5kg, 1kg, 2kg, 5kg plastic drums are normally put in boxes, such as 12x0.5kg, 12x1kg, 6x2kg, 4x5kgs, etc. All packaging can be provided with or without pellets. Aluminum sulfate packaging and specs can be made according to your requirements.
PH Minus granules. Lowers PH to ideal range of 7.2-7.6 ppm. Stops eye irritation, cloudy water, and scaling caused by high PH. Boosts the ability of chlorine to fight bacteria and algae. Contains granular sodium bisulfate. Prompt shipment within 3 weeks from order confirmation. Packaging can be made according to your requirements.
Algicide liquid . Name N,N-Dimethyl-2-hydroxypropylammonium chloride polymer. 1L/4L/5L plastic bottle, 12kg/20kg carton. 25kg,2 00kg in plastic barrel or 1000kg in IBC drum. Prompt shipment within 3 weeks from order confirmation. Algicide (PQ) Packaging can be made according to your requirements. PQ normal packaging 1L/4L/5L plastic bottle,12kg/20kg carton. 25kg, 200kg in plastic barrel. 1000kg in IBC drum. All packaging can be provided with or without pellets. PQ packaging can be made according to your requirements.
DDAC liquid . Name Didecyl Dimethyl Ammonium Chloride . 25kg, 200kg in plastic barrel or 1000kg in IBC drum. Prompt shipment within 3 weeks from order confirmation. Packaging can be made according to your requirements. DDAC normal packaging 25kg, 200kg in plastic barrel. 1000kg in IBC drum. All packaging can be provided with or without pellets. DDAC packaging can be made according to your requirements.
CAS NO 32289-58-0 General Name Polihexanide Abbr PHMB Active ingredient 20% White powder or almost colorless or pale-yellow transparent liquid Prompt shipment within 3 weeks from order confiramtion. Packaging can be made according to your requirements. PHMG packaging PHMB powder can be put into various plastic drums, such as 50kg, 45kg, 40kg, 30kg, 25kg, 20kg, 15kg, 10kg, 5kg, 2kg, 1kg, 0.5kg, etc. 25kg/plastic drum, 200kg/plastic drum for PHMB liquid. 1000kg IBC drum for PHMB liquid. All packaging can provided be with or without pellets. PHMG packaging can be made according to your requirements.
This chemical is a white and dry granular with a purity of %65-%70. Calcium hypochlorite granules dissolve in water easily and are mainly used in water treatment for disinfection and removal of bacteria, algae and micro-organisms. Physical specifications: White color solid granule, strong odor of chlorine. Soluble in water and alcohol with a strong reaction characteristic Stability and reactions: In high temperature is unstable. Reacts rapidly with oils and organic materials and is flammable. Handling and storage: Keep away from incompatible materials, reducing substances, organic materials, acids, combustible materials. Keep in cool and dry places. Environmental precautions: In case of spreading, collect and keep in containers having no incompatible materials. Packing and delivery: 25 kg containers
