Product name:3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctanesulphonic acid CAS: 27619-97-2 Content:30% liquid or 98% solid Appearance:light yellow liquid Use instructions Important intermediates for organofluorine synthesis, advanced chemical synthesis, fluorine-containing surfactants, electroplating intermediates
Introduction: 4-hydroxyethyl piperazine ethosulfonic acid (HEPES) is an important hydrogen ion buffer, which has a good buffer ability in the pH range of 6.8 to 8.2, and can control a constant pH for a long time. Using a concentration of 10 ~ 50mmol/L, the general culture medium containing 20mmol/L 4-hydroxyethyl piperazine taurine can have a good buffer capacity, and has no toxic effect on cells. Application: HEPES (4-hydroxyethyl piperazinethesulfonic acid) is a non-ionic amphoteric buffer with high polarity, and is inert to a variety of chemical reagents and enzymes. It does not participate in and interfere with the process of biochemical reactions, and has no inhibitory effect on enzyme chemical reactions. Therefore, it can be used specifically for the research of proteins and enzymes that are highly volatile and ph-sensitive to organelles and very volatile. Buffer solution preparation: (1)hepes buffer can be directly added to the prepared culture medium according to the desired concentration, and then filtered to remove bacteria. 2.38 g HEPES was added to each 1000ml of culture medium, the pH was adjusted to 7.2 with lNNaOH after dissolution, and the bacteria were removed by filtration before use. At this time, the concentration of HEPES was 10mmol/L. (2) 100x storage solution (lmol/L) could also be prepared. Before use, 99ml culture solution was added to lml storage solution, and the final concentration was 10mmol/L. lmol/L (100x) hepes buffer was prepared as follows: 23.8gHEPES was dissolved in 90ml double distilled water, the pH was adjusted to 7.5-8.0 with lNNaOH, and then the water was fixed to 100ml, filtered to remove bacteria, divided into vials (2ml/ bottle), and stored at 4�??�?�ºC or -20�??�?�ºC. Purpose: 1.Biological buffer; Reaction buffer, prehybridization buffer and hybridization buffer for isolation and analysis of RNA nuclear fraction; For RNA with T4RNA 2.Molecular biology grade is used for RNA3' -end labeling with T4 RNA ligase 3.Cell-cell adhesion, short-term cell aggregation culture, cleaning of tissue and cell buffer
Fatty alcohol polyoxyethylene ether, levelling agent O also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to the requirements), easily soluble in water, ethanol, ethylene glycol, turbidity point, PH value of 1% water solution is neutral. Resistant to acid, alkali, hard water, heat and heavy metal salt. It has strong evenness, slow dyeing, permeability and diffusivity for all kinds of dyes. It can be used in the same solution with all kinds of surfactants and dyes. Appearance milky white, beige paste or solid shape PH 6-8 turbidity point 91-96 Application 1. As a non-ionic surfactant, the washing industry plays a role in emulsification, foaming, and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, laundry detergent, detergent, and metal cleaning agent. 2. As a textile printing and dyeing auxiliary agent, the textile printing and dyeing industry plays an emulsifying role: emulsified silicone oil penetrating agent, leveling agent, polypropylene oil agent. 3. As a deinking agent, carpet detergent, and resin remover in the papermaking industry. 4. Other products such as pesticide emulsifiers, oil demulsifiers, lubricating oil emulsifiers, etc.
The utility model is used for manufacturing welding materials, air conditioning equipment and raw materials for manufacturing lithium metal. Used to make fireworks. It is also used as an analytical reagent, a heat exchanger It is used for air conditioning, pyrotechnics, dry batteries, and lithium metal The use of anhydrous lithium chloride is mainly used in molten salt electrolysis of lithium metal raw material, welding agent catalyst and dehumidification agent, special cement and polymer materials production of polyphenylene sulfide and other fields also used in aluminum. It is used as raw material for preparing lithium metal, used as welding agent for aluminum, air conditioner dehumidifier and special cement raw material
Industrial lithium carbonate is used in the manufacture of other lithium salts, such as lithium chloride and lithium bromide and so on. It also acts as lithium oxide materials in enamel, glass, pottery and porcelain enamel, and it is also added to the electrolytic cell for electrolysis of aluminum to increase the current efficiency and reduce the internal resistance of the cell and the bath temperature. Battery grade lithium carbonate is mainly used for the preparation of lithium cobalt oxide, lithium manganese oxide, ternary materials, lithium iron phosphate and other lithium ion battery cathode materials.
Usage 1. Used as a raw material for special high-strength glass. Analytical reagents. Pharmaceutical industry. 2. Used as an analytical reagent, also in the pharmaceutical industry 3. Mainly used in the production of special high-strength glass, food and synthetic beverage flavoring agents Packaging Cardboard bucket, Net weight: 25kgper drum. Storage Storage conditions: To be stored in Cool, dry and ventilated location and protected from light.
Dimethyl sulfoxide is an extremely important non proton polar solvent that is soluble in both water and organic solvents, it mainly used in dye, acrylic fibers, paint, coating, antifreeze and agriculture. Application: 1. DMSO can be used for the extraction of arene, also as the reaction medium used for resins and dyes, and applied to acrylic polymerization and spinning solvent. 2. DMSO can be used as an organic solvent, reaction medium and the intermediates of organic synthesis. It is highly versatile. This product has a highly selective extraction capacity, and can be used as the polymerization and condensation solvent of acrylic resin and polysulfone resin, as the polymerization and spinning solvent of polyacrylonitrile and cellulose acetate, as the extraction solvent for separating alkanes and arenes, and as the reaction medium for the arenes, butadiene extraction, acrylic fiber, plastic solvents, organic and synthetic dyes, and pharmaceuticals industries. In the field of medicine, dimethyl sulfoxide has anti-inflammatory and analgesic effect with a strong capability of penetration through the skin, and thus being able to dissolve certain drugs and boost their penetration into the human body to achieve the therapeutic purposes. Taking this carrier property of dimethyl sulfoxide can make it be used as pesticide additives. Add a small amount of dimethyl sulfoxide in some pesticides can facilitate the penetration of pesticides into the plant in order to improve the efficacy. dimethyl sulfoxide can also be used as the dye solvent, dye removing agent, and dye carrier for the synthetic fibers. It can also be used as the absorbent of recycling acetylene and also the modifiers of synthetic fiber, antifreeze agent and the capacitor dielectric, brake oil, and extractant of the rare metals. 3. DMSO can be used as analytic solvents and fixing agent of gas chromatography as well as the solvent for analyzing UV spectra
Rhodium is also called trichloride rhodium is a kind of red brown powder easy deliquescence Poisonous No water molecular weight 20926 melting point of 450 500 C decomposition The boiling point of 800 C sublimation To generate more fluoride above 600 C 70 C can be hydrogen reduction Insoluble in water acid soluble in cyanide Chemicalbook solution In the concentrated acid sulfuric acid heat decomposition When heated with sodium aluminum magnesium iron and other metals
Linalool is one of the most frequently used fragrance and perfumery substance and is produced in large quantity. Because of its relatively high volatility it imparts naturalness to top notes. Since, Linalool is alkali-stable; it can be applied in soaps and detergents. Linalyl esters can be prepared from Linalool.Flowery fresh odor, reminiscent of Lily of the Valley.
1.Quick details for Dimethyl sulfide Product name Dimethyl sulfide CAS 75-18-3 Molecular Formula C2H6S Molecular weight 62.13 Apperance Colorless liquid purity 99% 2.Useage for Dimethyl sulfide Organic intermediate 3 .storage for Dimethyl sulfide ventilated warehouse; keep away from sunshine; avoid fire; avoid moisture.
Diethylenetriamine pentamethylene phosphonate sodium is an organophosphorus series scale inhibitor. Its molecular formula is C9H28O15N3P5, and its relative molecular weight is 573.2. Diethylenetriamine pentamethylene phosphonate sodium is non-toxic, miscible with water, has better scale inhibition and corrosion inhibition effect, and has good temperature resistance, which can inhibit the formation of carbonate, sulfate and phosphate scale. Especially when the pH value is 10-11, calcium carbonate still has a good scale inhibition performance, and the scale inhibition effect at this time is 2 to 3 times higher than that of hydroxy-ethylenediphosphonic acid and amino trimethylenephosphonic acid. Another outstanding feature is that the combination with manganese ions has a good corrosion inhibition ability on carbon steel and copper alloys.
PTA is one of the important bulk organic raw materials, widely used in chemical fiber, light industry, electronics, construction and other aspects of the national economy. At the same time, the application of PTA is more concentrated. More than 90% of PTA in the world is used to produce polyethylene terephthalate (PET). It needs 0.85-0.86 tons of PTA and 0.33-0.34 tons of MEG to produce 1 ton of pet. Polyester includes fiber chip, polyester fiber, bottle chip and film chip. In the domestic market, 75% of PTA is used in the production of polyester fiber; 20% is used in the production of bottle grade polyester, mainly used in the packaging of various drinks, especially carbonated drinks; 5% is used in film grade polyester, mainly used in packaging materials, films and tapes. It can be seen that the downstream extension product of PTA is mainly polyester fiber. Application: PTA is mostly used in the production of polyethylene terephthalate (polyester). It is an important raw material for polyester fibers, films, plastic products, insulating paints and plasticizers. It is also used in dyes and other products' production.
Product Name:Betulinic acid CAS:472-15-1 MF:C30H48O3 MW:456.7 EINECS:207-448-8 Mol File:472-15-1.mol Melting point:295-298 C (dec.)(lit.) alpha D25 +7.5 (c = 0.37 in pyridine) Boiling point:550.0±33.0 C(Predicted) Density 1.065±0.06 g/cm3(Predicted) refractive index 7.8 (C=0.9, Pyridine) storage temp. Store at +4C Betulinic acid is a pentacyclic trialkyl compound, which is widely present in nature. It was originally isolated from the bark of evergreen plants of the Rhamnaceae growing in Eastern Africa, but the main source is extracted and purified from the bark of birch .
BBIT offers antimicrobial activity against fungi, yeasts and bacteria. BBIT is used for protection and surface anti-bacterial of PVC, silica gel, polyolefin, polyurethane, acrylic resin. Applications include: shower curtain / fabric coating (such as: ski clothing, raincoats, tents) / Vinyl wallpaper and floor / pool substrate / conveyor / soles and uppers / roofing membrane / wire and catheter sheath material / auto accessories (such as: hood, door seals, shock absorbers, steering wheel) / foam material (such as: cushions, gaskets, insulation materials ) / Household Appliances liner (such as: washing machines, refrigerators) / tarpaulins and awnings / antibacterial wall floor paint.
This product (technically named Poly dimethyl diallyl ammonium chloride) is cationic polymer in powder form or liquid form and it can be completely dissolved in water. Application Field PDADMAC can be widely used in industrial waste water and surface water purification as well as sludge thickening and dewatering. It can improve water clarity at a relatively low dose. It has good activity that accelerate the sedimentation rate. It is suitable for a wide range of PH 4-10. This product can also be used in the colliery wastewater, paper making wastewater, oil field and oil refinery oily wastewater and urban sewage treatment.
TTPC is widely used in industrial circulating cooling water systems, oilfield water injection systems, paper pulp and water systems, condensate water systems, industrial cleaning water systems, marine mollusk killing, and other industrial water systems for microbial killing, inhibition of microbial reproduction, and biological fouling treatment.
High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2 Alkyl Dimthyl Amine Oxide 1. It is fatty tertiary amine oxide, in acid medium was cationic, and in alkaline medium was nonionic. 2. It has excellent thickening, antistatic, soft, decontamination and Increasingfoam performance. 3. For low irritant performance, which not only can effectively reduce the anionic detergent irritant, but also has a bactericidal, Ca-soap dispersion, vulnerability to biological degradation and so on.
High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2 Used directly to formulate detergents for household and industry use,used as raw material to produce kinds of detergent, emulsion. 1) Used as efficient emulsifying agent for polymerizing pressure sensitive adhesive. Dosage: 1�?�¢?�?�¼0.1% 2) As the main content of highclass detergent and cleaner, it can blench, remove stains and oil and resist static electricity. 3) Used as the antistatic additive with cleaning function for textile oil. 4) Used as efficient antistatic agent for polyester substrate and film base, especially for polyester base cinefilm and filmstrip. Dosage: 0.5% or so. 5) Used as the antistatic agent for polyolefine, polyester and other polymer materials. 6) Used as the antihygroscopic and anticaking additives for powdered chemical products that are easy to absorb moisture and agglomerate. 7) Used as good degreasant for quality leathers.
Sodium hempetaphosphate, an inorganic compound, is a white crystalline powder, soluble in water, insoluble in organic solvents, mainly used in the food industry as quality improvers, pH regulators, metal ion chelators, adhesives and expansion agents.
Lactobionic acid is a compound composed of lactose and glucose, belonging to a type of bionic acid. It has strong acid neutralizing ability and metal ion chelating ability, and has antioxidant and moisturizing properties. Lactobionic acid is often used in skin care products. Lactobionic acid has various functions and benefits in skin care products as follows: 1. Antioxidant effect: Lactobionic acid is a powerful antioxidant that can neutralize free radicals and resist oxidative damage caused by environmental pollutants and ultraviolet radiation. Antioxidant action helps reduce oxidative stress in the skin, preventing the appearance of signs of aging such as wrinkles and fine lines. 2. Moisturizing effect: Lactobionic acid has excellent moisturizing ability. It attracts and locks in moisture and maintains the skin's moisture balance, thus keeping the skin elastic, supple and hydrated. 3. Exfoliation and skin regeneration: Lactobionic acid is a mild fruit acid that can effectively remove dead skin cells on the stratum corneum and promote horny renewal. Not only does this improve skin texture and even skin tone, but it also stimulates the production of collagen and elastin fibers, accelerating the skin cell regeneration process. 4. Anti-inflammatory and repairing: Lactobionic acid has anti-inflammatory and repairing effects, which can reduce skin redness, tingling and allergic reactions. It helps soothe sensitive skin and promotes the repair and healing of damaged skin. 5. Brighten skin tone: By promoting cell metabolism and removing aging cells on the surface, lactobionic acid can improve uneven skin tone and make skin brighter and smoother.
