This production line contains a series of machine such as dust collector, ebullience calciner, Heat-conducting oil boiler etc.If you want to know more detailed information ,please consult me freely. 2. The main composition of gypsum is dehydrate gypsum©vCaSO4.2H2O©w. However, the gypsum powder used in practical production (such as the gypsum powder for gypsum board, for mould, for plastering) is to dry and dewater the dehydrate gypsum, reduce the content of crystallization water in it, so the standard of crystallization of gypsum powder can meet the needs of all kinds of gypsum powder, because it can change into plaster of pairs. Plaster of pairs can re-integrate with water when it is applied into production, and it can be processed into new type building materials with a high intensity, such as gypsum board, gypsum block, etc. 3. Existing gypsum powder drying technologies the following: the heat, produced by the burning of medium in the stove, is transmitted to frying cauldron and pipe of circumgyrate stove, then gypsum powders are added, after mixture and drying through milling equipments, the finished product is transmitted to the store house. In this way, the quality of gypsum powder is cheesy, because the content of crystallization water is uneven.
Clay brick making plant wear resistant metal spraying technology was applied to the screw, pug mill, axis of screw and seasoning, conditioning, quenching treatment make sure the body of extruder work in long life. The harden surface gear was adopted in reducer, clutch are a component with own patent, all the treatments make the machine life-saving , meanwhile the reasonable design, compact structure reduce the energy consumption , without any shaking during working, even the extruder can working normal without foundation bolts.
Soil brick making machine wear resistant metal spraying technology was applied to the screw, pug mill, axis of screw and seasoning, conditioning, quenching treatment make sure the body of extruder work in long life. The harden surface gear was adopted in reducer, clutch are a component with own patent, all the treatments make the machine life-saving, meanwhile the reasonable design, compact structure reduce the energy consumption , without any shaking during working, even the extruder can working normal without foundation bolts. Dimensions:6210*1560*2350mm Weight:11.3ton
Clay brick making plant wear resistant metal spraying technology was applied to the screw, pug mill, axis of screw and seasoning, conditioning, quenching treatment make sure the body of extruder work in long life. The harden surface gear was adopted in reducer, clutch are a component with own patent, all the treatments make the machine life-saving , meanwhile the reasonable design, compact structure reduce the energy consumption , without any shaking during working, even the extruder can working normal without foundation bolts. Dimensions:7200*3300*2600mm Weight:16.5ton
New design, most advanced machine in china. Unique features: 1.Whole body alloys line 2.Twin screw extruder + single screw extruder -- much lower cost maintenance (old type is two single screw extruders). Because the modular construction of twin screw extruder. 3.High output. Specifications Xps board production line Excellent insulation Twin screw extruder High output Plastic processed:xps Certificate iso9001 Output 260-330kg/h or 340-480kg/h Gpps, 158k Foaming agent: f22+f142b, f152a, co2+ethanol Model: xps hky75/150 extrusion line Foaming agent: co2 Thickness: 20-60mm Width: 600mm, 900mm, 1200mm Density: 32-42kg/m3 Capacity: 250-320m3/24h Model: xps hky75/150 extrusion line Foaming agent: hcfc Thickness: 20-100mm Width: 600mm, 900mm, 1200mm Density: 30-36kg/m3 Capacity: >350m3/24h We offer: customer plant review, purchasing suggestion, technical sevice and traning. Main structure: 1.Feeding system 2.Hopper 3.Primary extruder (hky75) 4.Metering pump 5.Secondary extruder (s150) 6.Heat exchanger 7.Temperature controller 8.Static mixer 9.Slot die 10.Board calibrator 11.Halu-off system 12.Cooling roller 13.Cutting system 14.Control cabinet 0
Stripe cutting capacity:ín16 stripes/min Blank cutting capacity:ín25000 pieces/hr Gas source pressure:ú+0.6mpa Power of feeding strip motor:5.5/1.5 kw (1)product description: zqpq series automatic blank cutting system is mainly used to cut mud which is squeezed from extruder into qualified clay brick during sintering brick production. The system is the new vertical stripe cutting and blank cutting system designed and developed independently by our factory which adopts advanced automatic control, combing with photoelectric, close positioning, pneumatic and electric servo systems and etc. It has advantages of high accuracy, easy operation, and simple maintenance and so on. (2) Advantages: the original domestic patent product, with features of small mud, high yield and low power, etc. As requirement
Production capacity:15-50 m3/hr Linear speed of conveyor belt:6m/min Motor power:5.5kw Product description: gd series box-type feeder is the feeding equipment used to balance and ration during brick production. The rotary mud making rod of this equipment can crush the comparatively large soft materials. As requirement
Production capacity:20-80 m3/hr Working width of chain plate:680mm Motor power:3kw (1) product description: gl series plate feeder is the intelligent automatic feeder of stepless speed regulation type which was designed and manufactured by our factory on the basis of absorption of advanced structure of intermittent feeder. The electric motor adopts ytps series variable-frequency motor and the speed-adjusting range is 100-912 / min. The control system can be set into automatic and manual modes according to users ' needs: the automatic state should match the material quantity control systems of automatic cutting and extruding machines of our factory so as to achieve the automatic control for whole process line; the manual state adjusts feeding speed by potential or control panel, which has simple and convenient operation and smooth-running chain plate; the built-in computer can automatically set acceleration and deceleration time according to the load state of motor to achieve í¦fuzzy optimal acceleration and decelerationí¦ control. (2) advantages: rational structure, low failure rate, convenient maintenance; the control system can automatically choose optimal operating mode according to the load state of motor, so that the motor operating loss is at lowest and can save electricity over 60 percent. It is the most advanced energy-saving feeding equipment in domestic building material industries. As requirement
Working principle: There are two eccentric shafts rotating at high speed at the same time from opposite directions. Thus the strong centrifugal force is formed. The component forces of centrifugal force along with the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like curve, then fall down. The materials will move forward on the slope surface of the feeder.
It is a new invented machine in china. The eccentric vibrating exciter and tyre coupler are used in the machine. Advanced structure, great exciting force, low vibrating noise, easy maintenance and being endurable and sold feature the machine.
Four parts of the production line have been respectively awarded the national technological award and important national new product award. Customers speak highly of its advanced performance and excellent efficiency.íí Dtó=belt conveyor is connected to psx production line. We employ cad technology to optimize the structure of conveying mechanism. The reconstruction reduces the power consumption and abrasion of belt. No running deviation, low failure opportunity and easy maintenance feature this mechanism. Twenty sets of motors of this series are centrally controlled. All of them are of famous brand. The central controlled cabinet is amusing in appearance with modern sense. It is easy to control and maintain. The signals are clear. Psx manual sand-stone-making combines the domestic and foreign advanced technology of crushing, screening, conveying and controlling. This production line is of high efficiency. The granule shape and fineness modular are much more advantageous than others. Asz double channels closed circuit television monitoring system is introduced for this production line to achieve remote control. Electronic belt weighing device is emplyed. Electronic measurement lays a foundation for overcoming management difficulty, improving efficiency, lowing consumption, achieving remote automatic management computerized management. This production line possesses the following features: 1. Its investment is only 1/2~1/3 that of conventional production line; 2. The cost of ton-sand-stone is only 40~60% that of conventional production line. 3. Highly automatic production. Only 4 workers are needed for the single task.
Available from 30 M3 to 100 M3 / Hour Can be erected fast and easily. Engineered to perfection. Requires less maintenance and assures continuous performance. No compromise on quality, workmanship and designing. Hence you get best performance in toughest work conditions. Requires less installation area and minimum civil works. Hence less burden on customers pocket. Intelligent PLC based Automatic SCADA Control.
[Straw roof tile] 1. Straw color glazed roof tile is made of Crop stalks sawdust and all kinds of stones dust, but it is hard as steel, Flexural strength of Landscape orientation More than 4900N/M, Flexural strength of long direction More than 320N/M. water proof, damp proof, anticorrosion, antifoaming sound insulation, heat insulation High hardness and suitable toughness elasticity ageing resistance Longer life. 2. Can be nail, curium, convenient, process ability can mix construction adornment effect is good wait for a characteristic. 3. Straw complex tile is mainly used for roof waterproof heat insulation and decoration, can be widely used in factory ware house shopping mallsone-story house residential districts development zones and villas, also can make floor board and various house floor of the thermal insulation layer as well as various activities of the housing, balcony column board, etc. ...... 4. Not only environmental protection, a new kind of energy-saving building materials, you need not worry it will have radioactive or contains formaldehyde, benzene and so harmful substances. Numerous raw materials. To obtain material from local sources. The raw material of mainly contains straw of crop, sawdust and kinds of powder of stones, especially the straw of crop comes numerous in china, easy to gain . According to , the straw to be used can reached 7 hundred million ton, such as rice straw, broomcorn straw, corn straw, soybean straw, fruit shell, peanut shell, coco shell, sugar cane, flax, and soon. However, most of the kind of straw will be fired, that not only wasting the resources, but also polluting the environment. If the straw can instead of the wood or soil as a raw material, we just need less than 20%~35% straw to fill up flowing away of the wood and soil. In addition, straw using is the discard reused, reduced the cost largely. So the composite straw product will be low price. Meanwhile, producing will not be must has spacious marketing and strong competitions. Variety and Abundance The composite straw glazed tile can adjust its form and specification to adapt to the local marketing. Now, the following styles are popular in the market . Patterns and Colors: azure, red, purplish red, navy blue, crimson, orange, green, gray, black, white, and so on. Its divided into brightness and smoothness, and also make into granular and crude styles.
straw roof tile forming machine [Straw roof tile] 1. Straw color glazed roof tile is made of Crop stalks sawdust and all kinds of stones dust, but it is hard as steel, Flexural strength of Landscape orientation More than 4900N/M, Flexural strength of long direction More than 320N/M. water proof, damp proof, anticorrosion, antifoaming sound insulation, heat insulation High hardness and suitable toughness elasticity ageing resistance Longer life. 2. Can be nail, curium, convenient, process ability can mix construction adornment effect is good wait for a characteristic. 3. Straw complex tile is mainly used for roof waterproof heat insulation and decoration, can be widely used in factory ware house shopping mallsone-story house residential districts development zones and villas, also can make floor board and various house floor of the thermal insulation layer as well as various activities of the housing, balcony column board, etc. 4. Not only environmental protection, a new kind of energy-saving building materials, you need not worry it will have radioactive or contains formaldehyde, benzene and so harmful substances. Numerous raw materials. To obtain material from local sources. The raw material of mainly contains straw of crop, sawdust and kinds of powder of stones, especially the straw of crop comes numerous in china, easy to gain . According to , the straw to be used can reached 7 hundred million ton, such as rice straw, broomcorn straw, corn straw, soybean straw, fruit shell, peanut shell, coco shell, sugar cane, flax, and soon. However, most of the kind of straw will be fired, that not only wasting the resources, but also polluting the environment. If the straw can instead of the wood or soil as a raw material, we just need less than 20%~35% straw to fill up flowing away of the wood and soil. In addition, straw using is the discard reused, reduced the cost largely. So the composite straw product will be low price. Meanwhile, producing will not be must has spacious marketing and strong competitions. Variety and Abundance The composite straw glazed tile can adjust its form and specification to adapt to the local marketing. Now, the following styles are popular in the market . Patterns and Colors: azure, red, purplish red, navy blue, crimson, orange, green, gray, black, white, and so on. Its divided into brightness and smoothness, and also make into granular and crude styles. seaworthy packing
Main technical data: Control system mitsbushi plc computer control Cycle time 15-20s Total power 22.2kw Total weight 6t Pallet size 890x535x20mm Production capacity: Block product dimension(mm) pcs/per mould output/per shift(8hours) Hollow block 390x190x190 4 6000pcs Perforated block 240x115x90 12 18000pcs Muti-hole block 240x180x90 8 12800pcs Solid block 240x115x53 26 41600pcs Holland block 200x100x60 14 16800pcs Payment terms: l/c t/t Min.Order: 1 set/sets Delivery time:40 days
Tech data: 1. Vibration frequency: 2800-4800 per/min 2. Rating pressure: 20mpa 3. Power: 38 kw 4. Cycle time: 15-20 s 5. Bamboo pallet: 940mmíß860mmíß20mm 6. Weight: 10000 kg 30000kg
Dimension L x W x H 3650 x 1700 x 825 (mm) Production Capacity 15 - 25 (tons / hr) Stirring Barrel Length 2200 (mm) Motor Power 22 (kw) Weight í+ 2500 (kg) Features of Type TL-JBJ-290II 1. Specially made for the material preparation process with three functions of stirring, mixing with water & kneading. 2. Type TL-JBJ-290II works by adopt structures of two shafts separately rotating in opposite directions to treat the materials. (It is available to add hoppers according to different requirement, like type 290II-L) Adopts the package of bottom wooden frame, bolt reinforcement supporting, and outer waterproof film for the machines; and wooden trunk for other parts or the wear parts.
Construction machinery and equipment, trucks, vehicles, producing and processing plants for the building industry, originated from switzerland, germany, bulgaria, and austria, new, almost new, and used with all the supported documentation/guarantees, etc. Depend of the goods.
Paper gypsum board production line is the equipment which produces new building materials----paper gypsum board production line. This production line mainly by three major part is composed, namely: material room, heating system, integral unit. Equipment types of plaster board production line: 1.Heat conducting oil drying 2.Hot air type drying Drying system:drying board with heated air inside of dryer Fuel:coal,national gas,heavy oil Main material:construction gypsum ,modified starch,paper foaming agent,water latex, and paper pulp. Quality standard:comply with GB/T19001-2000 Certificate Authentication:ISO and CE Our production line with high degree of automation,low power consumption,high quality.The production are according with the national standard. Production features: this equipment is produced by light, heat insulation, noise, fire and other characteristics. Equipment features:small investment, easy to operate, space small, high efficiency. Containers
High technology, nice quality and versatile, the machine can be fit with the block stacker as the simple production line. It is a simple production line with certain production scale and suitable for the small or the medium-sized plant., its maximum rated force is 120kn and the shaping cycle is 15-20second/time. The following is details for fzqt10-20: Size: 3700*1800*3000 Total weight: 20000kg Power: 34.85kw Form of vibration: pressure molding vibration Frequency: 4500-5400 times/minute Splint size: 1120*880*45mm Shaping cycle: 15-20 seconds/time Maximum rated force: 120kn Type Specification Number Output per hour Block 390× 190× 190mm 10 piece 1440 Concrete brick 240× 115× 53mm 48 piece 8640 Porous brick 240× 115× 90mm 24 piece 3240 Ground brick 200× 100× 60mm 28 piece 5040 Aqueous block 400× 400× 100 4 piece 720
