1.T Post explain SIMPLE IS MORE-This seemingly simple "T" Design post is of thermal plastic material manufactured in a manner which forms a post that clearly out performs, stronger and the best value of any other comparable post. A steel fence post, also called (depending on design or country) a T-post, star picket, a Y-post, star post, star dropper or waratah, is a type of fence post or picket. They are made of steel and are sometimes manufactured using durable rail steel. They can be used to support various types of wire or wire mesh. The end view of the post creates an obvious T, Y or other shape. The posts are driven into the ground with a manual or pneumatic post pounder. All along the post, along the spine, there are studs or nubs that prevent the barbed wire or mesh from sliding up or down the post. 2, Product Standard: 1.MATERIAL: low carbon steel 2.LENGTH: 4'---10' 3. Thickness: 1.3mm, 1.5mm, 2.0mm 4.WEIGHT: 0.95lb/feet 1.25lb/feet 1.33lb/feet 5.SURFACE TREATMENT: Green painted ,Red painted 6.TYPE: with plate ,without plate;withclip ,without clip
Specifications 1.Materials: low carbon steel, medium carbon steel and other materials. 2.Features: support of strong, good stability. 3.Use: the product adopts the new technology,which is mainly used for building and infrastructure engineering Foundation, underground works or bridge, and other large bearing parts of reinforced fastening, large building industry-layer or multi-layer steel connection between. 4.other Name: Bar support also known as the erection of Stoll, metal pad, stool, metal horse stool,reinforcing steel bar stool. 2.full products information 1).SB--Slab Bolster dipped Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 1-3/4"; 2"; Length: 5' and 10' are available. Surface treatment: plain and Epoxy coated. Special request also ok. For 5' length there are 12 legs. Other specifications are available as buyer's requirement. 2).SB--Slab Bolster tipped Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 1-3/4"; 2"; Length: 5' and 10' are available. Surface treatment: plain and Epoxy coated. Special request also ok. For 5' length there are 12 legs. Other specifications are available as buyer's requirement. 3).SBU--Slab Bolster Upper Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 1-3/4"; 2"; Length: 5' and 10' are available. Surface treatment: plain and Epoxy coated. Special request also ok. For 5' length there are 12 legs. Other specifications are available as buyer's requirement. 4). BB--Beam Bolster: Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 2"; Length: 5' and 10' are available. Surface treatment: plain and Epoxy coated. Special request also ok. For 5' length there are 24 legs. Other specifications are available as buyer's requirement. 5). BBU--Beam Bolster Upper: Typical Sizes ( Height ) : 1/2"; 3/4"; 1"; 1-1/2"; 2"; Length: 5' and 10' are available. Surface treatment: plain and Epoxy coated. Other specifications are available as buyer's requirement. 6). CHC--Continous High Chair Dipped: Typical Sizes ( Height ): 2"; 3"; 4"; 5"; 6"; 7"; 8"; 9". Length: 5' and 10' are available. Surface treatment: plain and Epoxy coated. Special request also ok. For 5' length there are 8 legs. Other specifications are available as buyer's requirement. 7). CHCU--Continous High Chair Upper: Typical Sizes ( Height ) : 2"; 3"; 4"; 5"; 6"; 7"; 8"; 9". Surface treatment: plain and Epoxy coated. For 5' length there are 8 legs. Other specifications are available as buyer's requirement
1.Material:inside wheel:cast steel steel plate:Q235 2.Packing:4pcs/carton
Feature of ground screw foundation ground mounting 1.easy and quick installation with piling machine 2.professional customized design 3.10 years quality warranty and 25 years design life 4.suitable for various kinds of ground condition and no destroy to soil 5.cost effective with around 5m span between support mounts Professional advantage More than 10 years’ professional producing experience. Price advantage We are manufacturer and we have our own factory, you can get a competitive price with high quality. Service advantage Your inquiry will get quickest and most efficient response. We can provide samples for your evaluation as well as fastest delivery. Honor advantage Good reputation in this industry due to our high quality products and service.
1.All sizes are customized according to the requirement of the guest 2.Painted or Hot Dipped Galvanized. 3.Beautiful and elegant 4.Process:Stamping and welding and hot dip galvanized(painted)
1.Specifications 1.Product: Y Post or Fence Post 2.Material: carbon steel,rail steel 3.1.58kg/m. 1.9kg/m, 2.04kg/m 4.0.45-2.4m length 2.Full Product Information Materials: carbon steel,rail steel Corrosion Form: Painted ,non-painted ,hot-dipped galvanized. Packing: 5 pcs/Bundle,40 Bundles/iron pallet. Usual weight: 1.58kg/m. 1.9kg/m, 2.04kg/m. Length:0.45M, 0.60M, 0.90M, 1.35M, 1.50M,1.65M, 1.80M, 2.10M, 2.40M. (We can manufacture the goods according to customers requirement) .
1.Specifications 1)One type Tomato Support Wire 1.Product name: Tomato Spiral Wire, Spiral tomato support, plant support wire 2.Material: Steel Wire 3.Diameter: 5.5mm-8.0mm 4.Length: 1.5m-2.4m 5.Surface treatment: Galvanized, Powder coated 6.Packing: 5 or 10pcs/bundle, then in pallet or carton
nstall site: All types of Soil Pipe Material: Q235B Pipe Diameters: 50~140mm Pipe Length: 1000~2000mm Pipe Thickness: 2~4mm Standard: GB50021-2001 GB50007-2002 GB50011-2001 Anticorrosive: Hot Dip Galvanized
1.Type:Ball Post Cap 2. Material:Copper or stainless steel or iron 3.Thickness:0.8mm,1.2mm 4. Size: 71mm,91mm,101mm,121mm 5.Surface treatment:Hot Dip Galvanized,PVC Coated 6.Used for iron fence post caps, wood fence decoration post post.
1.All sizes are customized according to the requirement of the guest 2.Painted or Hot Dipped Galvanized. 3.Beautiful and elegant 4.Process:Stamping and welding and hot dip galvanized(painted)
1.Type:Mushroom Rebar cap/Plastic rebar cap 2. Raw material: plastic 3. it is used for rebar,and avoid the rain,water and others. 4. different size and color according to customer's need. 5. the method is injection molding. 6. Size: used for 9-16mm,20-25m,28-32mm bar steel
Specifications mgo board fireproof wall board green and environment board Features:.Fireproof,Damproof,Heat insulation,co Specifications HS Code:6808000000 Material :mgo,mgcl2,sawdust,perlite,non-woven cloth Standard size:1220*2440mm 1220*3660mm Description: 1) Fireproof:Resistant to combustion at 800 degree and remains flameless at 1200 degree 2) Waterproof:Resistance to deformation in wet environments 3) Weight:Light weight, (volume weight:0.96g/cm3) 4) Strength:Bendable and impact resistant 5) Sound insulation:Sound loss through a 6mm thick tolar tm plate-29dB 6) Heat resistance:Thermal conductivity of 0.216w/mk 7) Durability:Resistant to halogen accumulation, long lasting strength 8) Cold resistance:Can be used at -40 degree 9) Installation:Easy to cut, saw, nail, stick, paint and veneer 10) Environmental friendly:Free of asbestos, formaldehyde and ammonia MGO fireproof sheet is a kind of environmental-friendly fireproof board widely used in construction and decoration. It's made from magnesium oxide, magnesium chloride, fiberglass mesh, sawdust, perlite etc. We use, highly-purified active MGO as the main fireproof material of board, high-quality MgCl2 as the main cementing material to solidify other materials, alkali-resistance fiberglass mesh to ensure the high strength of board, soft sawdust and light non-combustible perlite as filling materials.
Features: 1.Fireproof Magnesium Fireproof Board was tested by the National Center for Quality Supervision and Testing of Fire Building Materials (NFTC). Its fireproof level is rated level A (nonflammable level) 2.Damproof Magnesium Fireproof Board is excellent in moisture-resistance. Dry bending strength is 15Mpa. Bending strength under absorbed moisture is 22Mpa. 3.Heat insulation Magnesium Fireproof Board has heat prevention material incorporated, it has great feature of heat prevention. Thermal resistance is 1.14m2k/w. 4.soundproof Magnesium Fireproof Board is proved to have good noise insulation property after inspected by the National Center for Quality Supervision and Testing of Fire Building Materials (NFTC), The noise insulation factor of the wall can reach 44dB and 47dB. It has the best noise insulation constitution in China, especially the 95mm wall comprised by the 10mm board.It is light, t can save time, space, weight and expense. It is a new and high efficient wall. 5.compact resistance Magnesium Fireproof Board is a light board. Its density is less than 1.0¡Á1.03kg/m3. At the same time its bending strength and impact resistance is excellent. Also, it will maintain its' quality during construction.
magnesium oxide board functions: 1) Flame proof: Resistant to combustion at 800 degree and remains flameless at 1,200 degree 2) Non-flammability: GB8624 grade A 3) Waterproof: resistant to deformation in wet environments 4) Weight: Light weight,(volume weight: 0.85 1.27g/cm3) 5) Strength: Bendable and impact resistant 6) Invariability: Resistant to deformation in wet, hot and dry conditions 7) Sound insulation: Sound loss through a 6mm thick Tolar TM plate-29dB 8) Heat Resistance: Thermal conductivity of 0.216w/mk 9) Durability: Resistance to halogen accumulation, long lasting strength 10) Cold resistance: can be used at 40 degree 11) Installation: Easy to work, fix and decorate 12) Environmentally friendly: free of asbestos, formaldehyde and ammonia standard:1220*2440,thickness:3mm-20mm. our products support by ISO,CE,etc.certificate. WELCOME VISIT WWW.WORLDPULL.COM TO GET MORE INFORMATION.
Mgo board (usually called magnesium fireproof board) is the building material widely used in the construction area. The stable magnesium colloid is reinforced by middle alkali glass fiber net and stuffed by light material then becomes new frameless decorative material Features: Fireproof and waterproof Incombustible: A grade, GB8624 density of the fiberglass mesh 4x4mm, 6x6mm, without fly ash in our boards without non-alkaline fiberglass Applications: partition wall of office room, shopping mall, theater, ceiling, etc. Pcking: wooden pallet or in bulk Production Capacity and quality: 10000pcs/day; 300000pcs/month With high quality of A Grade Competitive price 1. With density about 0.9 g/cm3-1.0 g/cm3. 2. Flexible and easy to make proper sculpt and designs. 3. Perdurable and great duration of life. 4. Antisepsis, mothproof, ant proof.. 5. Heat preservation, heat insulation, sound insulation 6. Scientific prescription, real green and environmental material 7. 100% no Asbestos Contained. 8. It is applicable to other designs of decoration and quadric process.
Specifications: 1) Thickness: 3mm - 20mm(3mm,6mm,8mm,9mm,10mm,12mm,15mm,18mm,20mm) 2) Max. width: 1,220mm 3) Max. length: 3,000mm(2400mm,2440mm,2700mm,2750mm,3000mm) 4) Edges: square / bevelled / tapped
Fiber cement board is made from high-quality fiber and mineral substances with advanced technology and process ,which hace undergone high temperature and high pressure maintenance,and special treatment. Specifications -2440*1220*4-20mm -2400*1200*4-20mm -3050*1220*5-18mm -Other optional specifications available upon request -Optional surface sanding and finishing treatment Main characteristics -Excellent fire-proof performance -Excellent moisture-proof performance -Good durability and long service life -High strength -Stable dimensions -Good heat and sound insulation
Mgo board Main characteristics Fireproofinfg characteristic:A grade non combustible(GB8624) Density:0.9-1.1g/cm3(GB/T7019-1997) Intensity of bending resistance when dry :18Mpa(GB/T7019-1997) Intensity of bending resistance when moisture-saturated condition:22Mpa(GB/T7019-1997) The rate of deformation when pick up the moisture:0.26%(GA160-1997) The shrinking rate when heated:1.0%(GA160-1997) Water permeability:there is no drop of water to emerge in the back(CNS13778) Impact resistance:No crack,strip and run through(CNS13778) Thermal resistance:1.14m2k/w(GB/T 13475-92) Sound insulation:44db(GBJ121-88) Color:white or grey Security:100% does not include the asbestos,formaldehyde,and benzene Radioactivity;Not limited by the scope of application(GB6566-2001) Our Absolute advantages: Grade A non combustible(GB8624) fireproof,waterproof,soundproof green mgo board friendly mgo board 1 direct manufacturer 2 no middleman profit 3 in stock fast shipment 4 Hi-Q,CE ISO,SGS
Green dampproof board is designed for replacing fiber cement board,because of similar color-grey color. However be compared with fiber cement board, dampproof board is fireproof A grade,dampproof,we do the test,dampproof board could be remained orginal after put into the water for one month. It is easy to cut ,to install. Most important is that dampproof mgo board is low cost building material for projects, will make huge profit for you.
Dampproof board is a new dampproof material,this kind of product has the high performance of dampproof, and it is tested that it could be remained original after put into the water for one month, it will be not distortion, and there is the performance environment protection, damp resistance, high intensity, low weight, sound insulation, keep warm. It could be used in the space of damp like cookroom, bathroom and the inner of exterior wall. The surface of this kind of product could be pasted tile, wall paper, paint and so on. It is used Gray to distinguish the other board. Good performance: 1) Fireproof: Grade A. 2) Keep warm, insulate against heat, the sound insulation. 3) Moisture resistant. 4) Construction simple, easy and swift, easy to decorate, easy to cut, bore, plane, shear, good surface finish, applicable to other modeling to decorate for twice/ 5) 100% does not include the asbestos, scientific prescription, really green environmental protection panel. 6) Durable have long performance life. Widely used in commercial building, industrial building, residential housing, public place and so on.
