Material :plastic, concrete Round conductor/flat tape range mm 8-10 Height / lenght mm 105 Diameter mm 130 Weight kg 1 Others warranty: up to 5 years
Very fine N C putty to fill the minor surface flaws.
Calcium Silicate Board main material of the products a re SIO 43% CaO 44% and reinforcing fiber.
Calcium silicate board main material of the products are SiO 43%, CaO 44% and reinforcing fiber. The products are made by stirring, heating, gelling, forming, pipe hardening and drying. With light bulk weight, Low thermal conductivity and high bending and compressive strength character, using in construction.Petroleum, electric power and Building partition wall, curtain wall, roof and building envelope thermal insulation.
Smart e-care is a combination of polymer, silicones and inert chemical powder materials for exterior wall coat to protect the surface from Heat, Water and Acid Rain. It is a caring skin for any building.
Blister plaster is made of adhesive hydrocolloid and high-permeability PU film, without any medicinal ingredient. Available in different shapes and sizes to provide comprehensive protection. The semi-permeable PU film make it breathable and waterproofSoft ,elastic and comfortable ,stick quite well l on skin ,not easily to fall,like the second layer skin Highly absorbent,it can absorb lots of exduate and reduce maceration to the skin,accelerate wound healing
True Aegis wall putty is a polymer putty which smoothen the wall by filling the micro pores and cracks of wall. It decreases the consumption of paint on walls. It gives rich finish and homogenous gloss on walls. Polymer which are added in it gives high bonding strength to wall and paint.
Konk Plast is ad-mixture which gives dual property to cement concretes. Konk Plast act as a super plasticizers along with it gives partial crystalline water proofing to all types of concretes.
Smart Morta Care is a chemical admixture which is added to concrete mixtures to improve work ability and strength by helping the cement to react and cure completely. Unless the mixture is â??starvedâ?? of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good work ability.
Cement Concrete Polymer Mix Plus, long life and maintainance free additive for new plaster, crack repair additive, anti-shrinkage, high bonding (anti-erosion). Used for Prevention of Seepage and Salinity High adhesion to old concrete & cement surfaces. A multi purpose polymer for water proofing, cladding mortar. Water proofing base coat for sunken areas. Water proof. Acid resistant. Salt resistant coating.
sodium lignosulfonate superplasticizer are surfactants. After they are added to concrete, the hydrophobic groups are directionally adsorbed on the surface of cement particles, so that the cement has a negative charge. The cement particles with the same charge are mutually repulsed and dispersed under the action of charge repulsion. The flocculent structure formed by the cement at the initial stage of adding water becomes a dispersed structure, and the free water in the flocculent condensate is released, so as to achieve the purpose of water reducing agent. Therefore, adding wood calcium superplasticizer into concrete can reduce the water consumption of concrete mixture, reduce water cement ratio, improve workability, facilitate pumping and improve the strength, compactness and durability of concrete
MOQ : FCL 20ft Shipping : Sea Freight
Features 1.Obvious cooling 2.Good durability 3.High rate strength 4.Easy construction 5.Enviromental protection Application 1.Electrical and Mentallurgical equipment heat insulation 2.Cement klin Industrial coke oven heat insulation 3.Glass furnace equipment heat insulation 4.Regenerative heating furnace thermal insulation
Expanded perlite insulation board: The construction industry is a big user of perlite research suggests that more than 50 percent of expanded perlite worldwide is used by the construction industry. Perlite plays an important role in a wide variety of construction-related uses including: as an aggregate in lightweight insulating concrete and plaster, as a loose-fill insulation material for concrete masonry blocks, cavity walls, in residential homes; and in a variety of specialty applications including fireproofing sprays, chimney fills, interstitial floors, acoustical sprays, etc. Lightweight Perlite Insulating Concrete offers architects, engineers, and building owners it has several important benefits: Superior thermal performance with high insulating values Non-combustible with superior fire ratings Lightweight and durable Non-toxic and tasteless. Green environment protection fireproof and waterproof Anti-corrosion Smooth monolithic slope-to-drain surface Roofing material can be nailed or glued Meets UL and FM wind uplift criteria Innovative hybrid technology improves cellular concrete Realize savings in time, labor, and materials Raw Material: Expanded perlite, sodium silicate, sodium silicate, and other raw materials extrusion made. Supply Ability: 5000 Cubic Meter Accepted Delivery Terms: EXW, FOB, CFR, CIF. Accepted Payment Currency: USD, EUR, AUD, CNY Accepted Payment Type: T/T, L/C, D/P, D/A, PayPal, Western Union
Refractory castables are produced from refractory aggregates, refractory powders, binders and other additives and can use directly or use after adding appropriate water or other liquid. Refractory castable is used as lining turning kiln, hot converter lining heat treatment furnace, furnaces of metallurgy industry, chemical industry and construction industry, circulation part of furnaces. Characteristics High refractoriness, high refractoriness under load. High density, low porosity. Good slag resistance and corrosion resistance. High strength and wear resistance. Good resistance to flake performance. Good thermal shock stability. Scouring resistance. Long service life
One Stop Shop for all your Bricks,Cement, Steel bars, Wall putty , Scalffolding , Sand & Bajri at best price online. 100+ brands Available online in one click. Brand: Ambuja, Kaamdhenu, natural, Birla & more
AMPS Fluid Loss Additive Risol FL2000S Overviews Risol FL2000S is a water-soluble synthetic polymer with strong dispersive properties in powder form,which can control fluid loss through Adsorption and aggregation reducing pore size and enhancing viscosity of water phase. FLAC Risol FL2000S is effective at temperatures higher than 400F (204C).The Product can help control fluid losses in seawater slurries, salt-saturated slurries, and slurries containing 5% KCl or 2% CaCl2. Risol FL2000S was developed as a less dispersive alternative to Halad-413 fluid-loss additive. It has a broad range of applications and has been developed to meet response requirements in heavyweight slurries, seawater, and saturated salt designs. It is designed for use in heavyweight (high-density), high-temperature slurries or any slurry that contains salt (2% up to saturated) with no loss of performance, it is the ideal fluid-loss additive for high-temperature, high-density slurries. Technical Datasheet Requirement Specification Fluid loss, ml/(90�ºC,6.9MPa,30min) â?¤100 Thickening time, min/ (90�ºC,35.6MPa) 60~160 Initial consistency, Bc 30 Compression strength, Mpa, /(105C,20.7MPa,24h) 14 Free fluid, % 1.5 Cement slurry:API Class G cement (HSR): 800g, distilled water: 352g, Risol FL2000S: 6.4g,Risol RT100S:2g, defoamer:1.6g. Features Appearance : Colorless or light yellow powder; Temperature range: 30C-204C (BHCT); Normal dosage: 0.5%-2.0%(BWOC); Package:25kg/bag; Guarantee Period: 1years.
It is a cement-based, one-component, ready-to-use plaster and repair mortar with special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In exterior plastering and exterior restoration works in buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.
- Cement-based, high performance, elastic thin insulation plate adhesive mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. - High bonding strength - Ease of application SCOPE OF APPLICATION - Bonding of plates indoors and outdoors in buildings, - On surfaces such as concrete, plaster, screed brick
- Cement-based, one-component, ready-to-use plaster and repair mortar containing special particle size filler and chemical additives that increase product performance and workability. SCOPE OF APPLICATION - In the interior plastering and interior restoration works in the buildings - In providing a smooth surface before painting, ceramic coating, insulation - Filling fine cracks - In repairing the damaged surfaces such as poured, carved, broken, ruptured concrete, plaster and such - On surfaces such as concrete, gas concrete, ytong, briquette, brick, heat pumice, prefabricated concrete, - 1-5 mm application range.
