Fire bricks & insulation material for industries, sanitary ware, refractory cement. Loose palletized and cement in poly bag / paper bag.
Radhaswami industries produces insulation castables. These are essentially insulation concretes used along with normal slab concretes. Advantages include: 1) Protection from extreme heat. 2) Heat reduced by approx 20% due to very high insulation property of concretes. 3) Increases efficiency of acs on top floors. 4) Economical. 5) Water proofing mandatory after laying of insulcast. 6) Application/installation similar to slab casting. 7)Thickness layers min recommended 50 mm. 25 kg hdpe bags with liner.
Bulk Kg/m3 More than 220 Acuities 220 The flexural strength Mpa P 0.30 P 0.30 The compressive strength Mpa P.50 P.50 Coefficient of thermal conductivity W/m.K Acuities naught Acuities 0.060.
Outer and inner layer 0.35mm to 0.6mm polyester coated gi sheet. Core rockwool of thickness 50mm , 75m , 100mm , dencity 120kgs/cubic meter and eps 40mm to 300mm thick se grade dencity 16kgs/cubic meter. Rockwool 940mm wide and length 2000mm to 7000mm. Eps 950mm wide and length 2000mm tm any transportable length.
Ground granulated blast furnace slag/GGBFS/GGBFS Powder The GGBFS Powder that we export complies with standard of BS 6699. Physical and Chemical properties: SO3: 0.08% MgO:12.36% Mn2O3: 1.26% Insoluble Residue: 0.1% Moisture content: 0.02% L.O.I: 0.14% Cl-: 0.026% SiO2+ CaO+ MgO: 82.71% (CaO+ MgO)/ SiO2: 1.34 CaO/ SiO2: 1.00 Mortar compressive strength: 13.5N/mm2 for 3 days, 32.5 N/mm2 for 7 days, 60 N/mm2 for 28 days Activity index: 58% for 3 days, 83% for 7 days, 106% for 28 days Minimum Order Quantity: 1000 T Supply ability: 50,000 T per month Package: 1.5 tons per pp bag Function: High strength, the faster of condensation and induration, good frost resistance and good workability Sphere of application: Applicable to important structure of high strength concrete and prestressed concrete engineering, such as high-rise building, high-grade highways, bridges, etc. Our company established in 1995, and has become one of the biggest company dealing with the export of¨¢GGBFS and GBFS in north China. We are glad to cooperate with friends all over the world. 1.5 tons per jumbo bag
Product composition: cool goal solid phenolic core panels are composed of melamine-impregnated decorative surface papers superimposed over a varying number of kraft phenolic core sheets to achieve a desired thickness. Decorative surface papers may be used on both sides of the panel, or one side may be sanded for bonding to a suitable frame. Recommended uses: cool goal solid phenolic core (spc) panels are produced in various thickness adequate to preclude the use of a substrate. They are useful where flat, freestanding panels are needed for decorative and/or functional purpose: toilet and dressing room partitions, instrumentation panels, workbenches, shelving and tabletops; casework, furniture surfacing applications and interior doors. Panel size: 4'x 8', 4'x10', 4'x12', 5'x6', 5'x10', 5'x12', 6'x6' . Thickness: from 3mm to 30mm.
Used to adhere faience, ceramics and such materials. Easy to prepare and apply, with high stability, cement based and grey colour adhesive. Along above materials, in all kind of indoor/outdoor horizontal-vertical of concrete, plaster and cement-based surfaces applications. Applications òIndoor/Outdoor òFixings tiles and ceramics on wet cement-based surfaces like bath, kitchen and balcony. òEach packages are 25 Kg. Packages are25kg.
Aluminum composite panel material: A) front: aluminum alloy sheet coated with pvdf(hylar5000, kynar500) or polyester Resin (pet) roasting painting B) core: normal polyethylene , fireproof polyethylene C) back: aluminum sheet coated with polyester resin painting D) surface finish: treated with pvdf and pet resin rolling roasting coating E) aluminum sheet thickness: , 0. 12mm, 0. 15mm, 0. 21mm, 0. 3mm, 0.35mm, 0. 4mm, 0.45mm, 0. 5mm Aluminum composite panel dimensions: A) thickness: 3mm, 4mm , 5mm B) width: 1000mm, 1220mm, 1250mm, 1300mm, 1500, 1550mm, 1570mm. C) length: as customers' requirement. It is better less than 6000mm. D) weight: 5. 5kg/sqm based on 4mm thickness , 4kg/sqm based on 3 mm thickness. E) standard size: 1220 x 2440mm F) qty/20' fcl: 4mm/800pcs, qty/20' fcl: 3mm/1000pcs G) nonstandard sizes are available according to your requirements Aluminum composite panel features: 1) light weight, flat surface and high peeling strength . 2) excellent heat insulation, sound insulation, fire-resistance, weather resistance 3) various decorative colours 4) easy process and installation 5) design performance 6) color will not be flaking or fading and keep fresh for years. (5) aluminum composite panel applications: May be widely used in galleries, exhibitions, saloons, stores, offices, banks, hotels, restaurants and apartments, An ideal decorative materials for buildings, outer and inner walls , facade , partitions, kitchen cabinets, billboards, signboards, tunnels, subway interiors, ceilings, eaves, galleries, balconies, partitions, interior decorations , telephone booths, vehicle bodies, yachts, industrial usage. Standard size is :1220x2440mm, Weight:5.5kg/m¦ based on 4mm thickness 20ft fcl:1000 pcs, 40ft fcl:800 pcs In strong wooden pallet or as requirement
Glass Wool without foil AP-D10/50 AP-D12/25 AP-D12/50 AP-D16/25 AP-D16/50 AP-D20/25 AP-D20/50.
Plasters and plastering systems Kraft paper sack
Material: high grade of gypsum, whiteness: >90 degree, breaking strength: 2.706MPa/2 hours, no impurity), with fiberglass, good quality fiber. Finish: Smooth surface, clear beautiful pattern, high temper. 1)It's fireproof, mildew and worm resistant, moisture proof, and sound and heat insulated. 2)Itcan be processed by sawing, digging, nailing, adhering and patching, and therefore it is easy and convenient in construction 3) Various shapes and sizes available. We can also produce upon your detailed requests. 6-10 pieces per bundle with water-proof package, filmy cushion between each pieces, and contractive plastic cover it ,also can according to your demand.
Introduction Model WD28-207-828 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX28-207-828 Frame Dimension 8m*1.5m*1.4m Weight 5-7 ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment. Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box.
Introduction Model WD76-305-914 series decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. Ití»s best to be used as the floor of high buildings, and the cost of such floor is low. Main Parameter Machine Type YX 76-305-914 Frame Dimension 19m*1.5m*1.3m Weight 10-12ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 11kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.75-1.5mm Forming Speed 10-12m/min Step Of Roller 25-30 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Introduction Model WD26-200-800/1000 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table Working Flow Decoiling the Sheetí¬í·Sheet Guidingí¬í·Film Coveringí¬í·Roll Formingí¬í·Measure Length í¬í· Cutting the Panelí¬í·Panels to the Supporter. Main Parameter Machine Type YX 26-200-800/1000 Frame Dimension 8m*1.5m*1.4m Weight 5-7ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 5.5kw Hydraulic Cut Power 5.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.4-0.8mm Forming Speed 1-3m/min Step Of Roller 14 steps More details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Component and Function 1. Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement. 2. Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. 3. Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. Main Parameter Machine Type YX15-225-900 Frame Dimension 5m*1.5m*1.4m Weight 3ton Voltage 380V/50HZ, or according to customsí» requirement Main Motor Power 2.2kw Hydraulic Cut Power 1.5kw Roller Material High grade 45# steel(plated chrome on surface) Coil Thickness 0.3-0.8mm Forming Speed 10m/min Step Of Roller 9 steps More Details Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box Delivery time 35days after receipt of deposit Warranty 1 year, and we will provide the technical support for the whole life of the equipment Package Main body of machine naked loaded into container, covered with plastic film, spare parts in box
Does not create cracks Can be applied to any surface
Uniaxial geogrid is a kind of high strength geosynthetics which take high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radition and anti-aging. Through directional stretch, the original scattered chain molecule will be realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation is only 4-10%, which nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Tensile Strength (KN/M) Tensile Strength @ 2% Elongation (KN/M) Tensile Strength @ 5% Elongation (KN/M) Elongation (%) Carbon Content (%) Width (M) TGDG50 í¦50 í¦12 í¦23 í_12 í¦2.0 2.0 TGDG60 í¦60 í¦16 í¦30 TGDG80 í¦80 í¦21 í¦40 TGDG110 í¦110 í¦29.5 í¦58 TGDG130 í¦130 í¦36.5 í¦72 TGDG170 í¦170 í¦50 í¦99 Standard package or as customers' requirements
Uniaxial geogrid is a kind of high strength geosynthetics which take high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radiation and anti-aging. Through directional stretch, the original scattered chain molecule will be realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation is only 4-10%, which nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Tensile Strength (KN/M) Tensile Strength @ 2% Elongation (KN/M) Tensile Strength @ 5% Elongation (KN/M) Elongation (%) Carbon Content (%) Width (M) TGDG35 í¦35 í¦10 í¦22 í_10 í¦2.0 2.5 TGDG40 í¦40 í¦11 í¦24 TGDG50 í¦50 í¦12 í¦28 TGDG60 í¦60 í¦14 í¦34 TGDG80 í¦80 í¦26 í¦48 TGDG100 í¦100 í¦35 í¦68 TGDG110 í¦110 í¦38 í¦75 TGDG120 í¦120 í¦43 í¦82 TGDG130 í¦130 í¦47 í¦90 TGDG150 í¦150 í¦57 í¦120 TGDG160 í¦160 í¦60 í¦124 TGDG180 í¦180 í¦64 í¦130 TGDG200 í¦200 í¦74 í¦145 TGDG220 í¦220 í¦80 í¦156 TGDG260 í¦260 í¦94 í¦185 Standard package or as customers' requirements
Biaxial geogrid is a kind of high strength geosynthetic which takes high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radition and anti-aging. Through directional stretch, the original scattered chain molecule is realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Longitudinal/ Transverse Tensile Strength (KN/M) Longitudinal/ Transverse Tensile Strength @ 2% Elongation (KN/M) Longitudinal/ Transverse Tensile Strength @ 5% Elongation (KN/M) Longitudinal/ Transverse Elongation ú¿%ú¬ TGSG1515 í¦15 í¦5 í¦7 í_15/13 TGSG2020 í¦20 í¦7 í¦14 TGSG2525 í¦25 í¦9 í¦17 TGSG3030 í¦30 í¦10.5 í¦21 TGSG3535 í¦35 í¦12 í¦24 TGSG4040 í¦40 í¦14 í¦28 Standard package or as customers' requirements
Refractory product with refractoriness is over 1,750oC. Many size and shaped of products are available. We are pleased to enclose the specification as follow: Chemical composition 1. SiO2, (%), < 55 2. Al¼2O3, (%), > 37 3. Fe2O3, (%), < 1.7 4. CaO, (%), < 1 5. MgO, (%), < 0.2 6. K2O, (%), < 1.5 7. Na2O, (%), < 0.5 Physical properties 1. Refractoriness, (oC), > 1,750oC 2. Heat resistance 950oC û air, > 11 times
