High Alumina Bricks are produced with select bauxite chamotte as main raw material, fired at 1450-1470 �°C by advanced process with strict quality control. High Alumina bricks have great features like high temperature performance, great corrosion and wear resistance, high bulk density, low iron content, etc. High Alumina bricks are extensively used in mining, metallurgy, cement, and chemical, refinery and refractory industries. These bricks are used in all kinds of industrial furnaces and high temperature areas to prolong the lives of furnaces.
Specification: 1) Appearance > Faint Yellow, 2) Bulk Density > 2.96g/cm3, 3) Self Wearing (Within 24hrs) > 0.04%, 4) Water Absorption > 0.008%, 5) Degree of Hardness > 7-8, 6) Temperature > 1400 - 1600 C, Alumina Bricks (142mm x 42mm x 96mm)
The Al2O3 content is more than 55%, and is calcined from a high-content alumina raw material such as a silicone raw material or a bauxite. High heat resistance and high temperature resistance at 1770 C and above. Has good slag resistance, mainly used in the masonry of steelmaking electric furnace, glass furnace, cement rotary furnace and so on. Characteristics of High Alumina Brick Price: 1.Refractoriness: More refractory than refractory clay bricks and semi-silica bricks, up to 1750-1790C, belonging to high-grade refractory materials. 2. Load softening temperature: Since the high aluminum has a high Al2O3 content, a low impurity content, and a low formation of the molten glass body, the fire-resistant softening temperature is higher than that of the refractory clay brick. However, since the mullite crystal has not yet formed a network structure, the load softening temperature is lower than the load softening temperature of the silica brick. 3. Slag resistance: High Al2O3 has high Al2O3 content, close to neutral refractory material, and can resist the erosion of acid slag and alkali slag. Because it contains SiO2, the resistance to alkali slag is less than acid resistance.
Magnesia-chrome brick is a high-level refractory product material ,which contains MgO and Cr2O3 as the main components, periclase and spinel are the main mineral components. This type of brick has high refractoriness, high temperature strength, strong resistance to alkaline slag, excellent thermal stability, and certain adaptability to acidic slag. The main raw materials for the manufacture of magnesia chrome bricks are sintered magnesia and chromite. The purity of the magnesia raw material should be as high as possible.
Features 1.High refractoriness 2.Good abrasion and creep resistance 3.High density Applications It is mainly used in areas that require high abrasion and temperature resistance, such as gliding rail bricks in steel pusher metallurgical furnaces, the tapping platform (tapping spout) style walking beam furnaces, and also as the interior for destructors.
Plant Introduction Sinometal refractory engineering Co., Ltd. is a modern comprehensive enterprise consisting of scientific research, manufacture and trade. Industrial products of the company are mainly magnesia refractories. Products of the company: The company possesses domestic advanced production line of refractories used in metallurgy industry; more than 160 sets of extensive manufacturing facilities; and more than 30 sets of checkout equipment. The company's annual output of magnesia carbon brick, alumina magnesia carbon brick and aluminium carbide brick and so on is 70,000 tons Quality advantages: All products of the company are in accordance with national standard as well as the enterprise's standard, and has got ISO9001 Quality Management System Certification and ISO14001 Environment Management System Certification. Scientific and technical advantages: The company invested a large sum of money to built the building of engineering technology center which covers an area of 5,000 square meters in 2012.The company's capability of scientific research and development is abundant. high refractoriness Brick brief introduction Magnesite Carbon brick is a kind of basic refractory which is made from magnesite, graphite as raw material, resin as binder, with high pressure moulding and low temperature treatment. As one kind of compound refractories, it make magnesite good slag erosion risistance and graphite high thermal conductivity and low dilatability mixed together. Thus BOF Brick has features of high refractoriness, good thermal shock resistance,erosion resistance, and has good performance in I&S industry, including BOF, EAF, LF. basic refractory brick series have the advantages of good performance, long life and low cost. And long supply experience can make sure that we can give our customer total solutions Alumina Magnesia Carbon brick has same production process, the main raw materials are fused alumina or bauxite, so it has better strength and refractoriness under load, but the slag resistance is not as good as magnesia Carbon bricks.
Andalusite is a superior high-alumina refractory material, with high temperature stability, chemical resistance, heat resistance, strong impact resistance, high thermal mechanical strength characteristics. The color of andalusite is gray, pink and red-brown. Heating to 1300, Andalusite will turn into mullite, which is one of the raw materials to produce advanced refractories.
We have more than a century of experience in the refractories materials and own 90% of the Greek market.
We offer high quality refractory products and materials meeting the entire needs of our valued clients. OUR REFRACTORY PRODUCTS AND MATERIALS Induction Furnace Lining (Quartz) Induction Furnace Lining (Neutral) High Alumina Ladle Bricks and Blocks Magnesia Carbon Ladle Bricks and Blocks Magnesia Carbon Bricks for LRF High Alumina Bricks for LRF Porous Plugs Well Block Slide Gate Sets Tundish Lining Tundish Nozzles COPPER MOULD TUBES We supply Copper Mould Tubes manufactured by the topnotch manufactures of China. Sizes and Shapes Single Taper, Double Taper, Triple Taper, Multi Taper Square: 80x80 to 200x200 mm Rectangle: 150x180 mm to 250x300 mm Radius: 3 meter to 12 meter meter Length: 700 mm to 1200 mm Customised: shapes, sizes and material
Red Clay Brunt Bricks
Refractory Fire Bricks With Normal Alumina, High Alumina Contain For Kiln, Floor And Heat And Acid Resistance
Thin brick, brick slips, facade brick
Drop Forged Carbon Steel Powder Coated With Grip Specification Size (Inch.) Inner Box (Qty.) Outer Box (Qty.) 2-1/4" 36 4-1/2" 24
Magnesia chrome brick is an alkaline refractory product, which is made of periclase and magnesia chrome spinel, and is fired at 1600~1800 °C in an oxidizing atmosphere. It can also be made into non-burned brick by chemical bonding agent such as water glass. According to the raw materials and process characteristics of the products, it can be divided into silicate-bonded magnesia-chrome bricks, direct-bonded magnesia-chromium bricks, re-combined magnesia-chrome bricks, semi-recombined magnesia-chrome bricks, pre-reacted magnesia-chrome bricks Casting magnesia chrome bricks.
With the breakthrough of the suspension preheating and pre-decomposition technology in the cement industry and the increasing size of the equipment, the heat load of the kiln is significantly increased, the rotation speed is accelerated, the alkali corrosion is severe, and the lining life and equipment operation cycle are shortened, thus the requirements for refractory materials. More demanding. Its performance advantages are mainly manifested in: 1. High refractoriness under load and excellent high temperature resistance; 2. High strength, abrasion resistance, and easy to peel off and erosion; 3. Low thermal conductivity and good heat insulation effect; 4. Strong flexibility and heat resistance Excellent seismic performance; 5, moderate density, reduce the cylinder load.
With the rapid development of the world automobile industry, the production process of automobile rearview mirrors has also made great progress, and then higher requirements have been placed on the performance and quality of the mold bricks. The glass bending brick has the following characteristics: First, the change of the reheating line is low, because the glass bending brick is sintered at 1050 ° C, which ensures the long-term use of the glass bending brick at 800 ° C. The characteristics of the burning line change to zero and no deformation; Second, the structure is fine, the glass bending brick is formed by micron material mixing by high-speed agitator, and the coarsest material particles in the batch are less than 1000 mesh, sectional structure Very fine; Third, the thermal shock stability is good, the glass hot bending mold brick will not appear any cracks (including cracking phenomenon) during long-term use; Fourth, the processing is convenient, the glass hot bending mold brick is according to user requirements specifications Made, this avoids the problem of large cutting and waste; fifth, the price is low, the price of glass bending bricks is lower than that of similar products. Glass hot bending mold bricks can also be used in industries such as hot bending glass, hot melt glass and process glass.
The glass is mainly made of silica sand and soda ash as raw materials which are melted at a high temperature. Glass melting furnaces are thermal equipment for melting glass and are usually constructed of refractory materials. Glass melting furnaces can be divided into two categories: pool kiln and crucible kiln. The pool kiln is the most commonly used kiln type in the glass industry. It is made of refractory materials, and has a flame pool kiln and an electric kiln. Casting zirconium corundum bricks are commonly known as white iron bricks. It is the most important refractory material to ensure the normal operation of the glass melting furnace. At present, the melting rate of the glass melting furnace at home and abroad is increased, the kiln age is extended, and the fuel consumption is reduced mainly due to the use of the refractory material. The use of fused zirconium corundum brick in the glass melting furnace is to build the upper pool wall, small furnace flat raft, small furnace raft, stone raft and chest wall. Fused cast blocks usually named zircon corundum brick also name AZS bricks( alumina zircon silica ),according to the ZrO2 content difference ,can be named AZS 5.5 ,AZS 12 .AZS 33, AZS 36, AZS 41 and so on. Beside because this type bricks are produced by special electric furnace by model, we also called this products Fused cast AZS bricks. Also according to the brick if have shrinkage cavities, we call them PT, QX, ZWS, WS. These bricks are widely used for iron & steel furnace and glass furnace, also chemical industrial furnace, especial in the glass furnace, you will find it usually.
Magnesia chrome brick is an alkaline refractory product, which is made of periclase and magnesia chrome spinel, and is fired at 1600~1800 °C in an oxidizing atmosphere. It can also be made into non-burned brick by chemical bonding agent such as water glass. According to the raw materials and process characteristics of the products, it can be divided into silicate-bonded magnesia-chrome bricks, direct-bonded magnesia-chromium bricks, re-combined magnesia-chrome bricks, semi-recombined magnesia-chrome bricks, pre-reacted magnesia-chrome bricks Casting magnesia chrome bricks. The magnesia chrome brick can be used in vulnerable parts of steelmaking electric furnace, RH, DH vacuum degassing device, secondary refining slag line parts such as VOD, LF, ASEA-SKF, AOD, steelmaking converter, cement rotary kiln and glass melting Kiln regenerators, etc.
The bricks we offer are widely applauded for their dimensional stability, compressive strength and durability. Moreover, super heat duty and high alumina fire bricks are the products made from different fractions of refractory grog, fire clays and calcined bauxite of high purity. The different fractions of these raw materials are mixed in counter current mixers and plugged for obtaining homogeneous mixture. The mixture obtained hence, is then pressed in high capacity presses to give the desired shape and size. These pressed shapes are fired in high temperature tunnel kiln at 1300°c and above. These bricks are manufactured as per is: 6 and is: 8 specifications and high alumina in the range heat 5050 to heat 88 in standard, arch and special shapes.We provide these quality assured bricks to the clients at nominal rates.
The bricks we offer are widely applauded for their dimensional stability, compressive strength and durability. Moreover, super heat duty and high alumina fire bricks are the products made from different fractions of refractory grog, fire clays and calcined bauxite of high purity. The different fractions of these raw materials are mixed in counter current mixers and plugged for obtaining homogeneous mixture. The mixture obtained hence, is then pressed in high capacity presses to give the desired shape and size. These pressed shapes are fired in high temperature tunnel kiln at 1300°c and above. The bricks are very light and porous maintaining good extranal temperatures and not allowing heat to radiate from the fire bricks thus increasing in overall furnace efficiencies.These bricks are manufactured as per asme standards and provided to the clients at nominal rates.
