Product name: S type force sensor Features: 1. Miniature s type tension load cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical specification: Rated output 2.0/3.0 ± 10% mv / v Zero balance ±2 % f.S. Non-linearity 0.05% f.S. Hysteresis 0.05% f.S. Repeatability 0.05% f.S. Creep (30min) 0.05% f.S. Temp. Effect on output 0.03% f.S. / 10ºc Temp. Effect on zero 0.03% f.S. / 10ºc Input impedance 385±5 Output impedance 350±3 Insulation resistance 5000m/100vdc Recommended excitation 5-10v Maximum excitation 15 v Compensated temp range - 10 ~ 60 ºc Operation temp range - 20 ~ 80ºc Safe overload 150% Ultimate overload 200 % Cable size 53m Wiring Red: + excitation black: - excitation Green: + signal white: - signal.
Product name: S type force sensors Features: 1. Miniature s type tension load cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical specification: Rated output 2.0 â± 10% mv / v Zero balance ±2 % f.S. Non-linearity 0.05% f.S. Hysteresis 0.05% f.S. Repeatability 0.05% f.S. Creep (30min) 0.05% f.S. Temp. Effect on output 0.03% f.S. / 10âºc Temp. Effect on zero 0.03% f.S. / 10âºc Input impedance 350â±5, Output impedance 350â±5, Insulation resistance 5000m, /100vdc Recommended excitation 5-10v Maximum excitation 15 v Compensated temp range - 10 ~ 60 âºc Operation temp range - 20 ~ 80âºc Safe overload 120% Ultimate overload 150 % Cable size Ã?4ã?3m Wiring Red: + excitation black: - excitation Green: + signal white: - signal.
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Capacity 10~5000kg Rated output 2.0 ± 10% mV / V Zero balance ±2 % F.S. Non-linearity 0.03% F.S. Hysteresis 0.03% F.S. Repeatability 0.03% F.S. Creep (30min) 0.03% F.S. Temp. effect on output 0.025% F.S. / 10ºC Temp. effect on zero 0.025% F.S. / 10ºC Input impedance 350±5Ω Output impedance 350±5Ω Insulation resistance �5000MΩ/100VDC Recommended excitation 5-10V Maximum excitation 15 V Compensated temp range - 10 ~ 60 ºC Operation temp range - 20 ~ 80ºC Safe overload 120% Ultimate overload 150 % Cable size �5�3m Wiring Red: + Excitation Black: - Excitation Green: + Signal White: - Signal capacity A B C D M Weight 10/20/30/50/75KG 63.5 50.8 12.7 19 M8*1.25�1/4-28� 100/200/250/300/500KG 76.2 50.8 19.1 25.4 M12x1.75�1/2-20� 750/1000/1500KG 76.2 50.8 25.4 25.4 M12x1.75�1/2-20� 2000/3000/5000KG 108 76.2 25.4 25.4 M18x1.5�3/4-16�
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Capacity 50kg,100kg,200kg,300kg,500kg Rated output 2.0mV / V Zero balance ± 2 % F.S. Non-linearity 0.1 % F.S. Hysteresis 0.1 % F.S. Repeatability 0.1 % F.S. Creep (30min) 0.1 % F.S. Temp. effect on output 0.05 % F.S. / 10ºC Temp. effect on zero 0.05 % F.S. / 10ºC Input impedance 1100±5Ω Output impedance 1050â±3î© Insulation Â?¥5000mî©/100vdc Recommended Excitation 10 V Maximum Excitation 20 V Compensated Temp Range - 10 ~ 60 ºc Operation Temp Range - 20 ~ 80âºc Safe Overload 150% F.S. Ultimate Overload 200 % F.S. Cable Size Ã?3ã?3m Wiring Connection Red: + Excitation Black: - Excitation Green: + Signal White: - Signal Range, Size, Thread Lb, Kg, A, B, C, Mm, Inch 250-150, 100-750, 70, 19, 80, M10*1.5, 1/2-20 2000-3000, 1000-1500, 70, 25, 80, M12*1.75, 1/2-20 5k-10k, 2000-5000, 108, 25, 95, M18*1.5, 3/4-16 20000, 10000, 175, 51, 130, M30*2, 11/4-12 40000, 20000, 190, 60, 160, M39*2, 11/4-12
Detailed product descriptionï Load cell factory in china, canister compression load cell, analog load cell, stainless steel/alloy steel Categoriesïcanister and compression load cell Patternïcolumn cylinder type Transform typeïresistance strain Out-wireï4-wire Output signal typeïanalog type Materialïstainless steel/alloy steel Capacityï5t, 10t, 20t, 30t Ip ratingïip68 Applicationïtruck scale Accuracyïoiml c2 c3 Fob portïshanghai Terms of paymentïl/c
IN-3411 0.05to10t Share Beam Load Cell for floor scale Vishay-Tedea 3400 load cell ItemsUNITTECHNICAL DATA Capacityt0.05-10 Rated outputmV/V3.0±0.04 Accuracy class C2C3 Combined error%RO
Detailed Product Description Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad Advantage: Language, printing list can be customized. Strong weighing pad with fixing screws Digitization menu,easy operation RS232 port is used to communicate with PC Floating technology is adopted to remove zero drift Ultra-high frequency ensures better anti-electromagnet ability Vehicle axle weight is measured axle by axle, and the max number is unlimited Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off Parts: 1. PT-40H Aluminum-alloy; Ultra-thin weighpad design: Easily mounted/unmounted slope; Hermetically sealed, suits different environment; Works both dynamically and statically; Can be used to measure axle weight and whole vehicle weight when two or four weigh-padsare connected together. portable axle truck scale Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad 2. Wireless Weighing Indicator Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad Dynamic Wireless Portable Axle Truck Vehicle Scale with 1 weighing pad Features Excellent weighing function and high precision Touch screen LCD Monitor Backlight lattice LCD, Clear both in daytime and nighttime Digital wireless technology is adopted, so the portability is largely increased Ultra-high frequency ensures better anti-electromagnet ability Double LCDs are used Measure and display vehicle velocity(km/h) Floating technology is adopted to remove zero drift Numbered options Vehicle axle weight is measured axle by axle, and the max number is unlimited Wireless transmission removes cable connection Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization RS232 port is used to communicate with PC Can conveniently input full vehicle license number with letters Can put in the name of the testing organization and operators Can store as many as 10000 vehicle testing records Mature inquiry and statistic function AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off The auto power supply system can be used for providing electricity and charging The instrument can work independently. And it also can upload testing data to computers
Detailed product description Ats-8kv, 9kv, 10kv , 12kvpower supplyis supplying the electronic power for anti-static bar. Because of different output voltage, there are 3 types power supply for choose. Especially using in bag making machine. Anti-static bar/ionizing air bar for bag making machinery working principle: Ats-8kv, 9kv, 10kv , 12kv power supply is using the high voltage transformer to power frequency voltage booster to the required voltage, for the use of different static removing products. Product features: 1. Adapt to the wide voltage range 2. Work stable performance security 3. Installation easily and operation simple 4. Good grounding protection Product output voltage bracket pipe emmiters power cable Anti-static bar max 10kv aluminum pvc stainless 2m Product service 1.After the warranty period of service Where the company sells after warranty period still will be responsible to repair the product free in charge, in order to protect the interests of customers. 2.If customers open and repair ion fan themselves, our company wonâ??t supply free warranty, according to the situation of discretion. V
Detailed product description Ats fpd-4fan hanging ionizing air blower Is a kind of static eliminator, that can provide a balanced ion flow and eliminate static or neutralize static in large-scale concentrated area or eliminate the static in those area that not easy to contact. The shell adopt stainless steel material, the ion flow is concentrated, the cover area near to zero gap, have good effective to eliminate static. Ats fpd-4fan hanging ionizing air blower working principle: Ats fpd-4fan hanging ionizer air blower can produce a lot of air with positive and negative ion, the electric charges on the object and fall, when the object surface charge negative static, it will attract positive ion in the air, when the object surface charge positive static, it will attract negative ion in the air, so that the electrostatic on the surface of the object is eliminated. Product features: *suitable for large-scale to eliminate static electricity; * quick static elimination, convenient installation; *with cleaner of ion emitter *build-in fan and high voltage generator; * ion wind volumn is ajustable Ats fpd-4fan hanging ionizing air blower applications: Precision electronic products; electronic assembly line, the production of microelectronics, optoelectronics; pharmaceutical manufacturing assembly lines, printing, packaging; small part injection molding, shear plastic film, circle and film, as well as mold release etc.. Specification: Operating voltage: 110v/60hzor220v/50hz Current consumption: 1ï25aor0.62a Operating temperature: 0---50 Size: 1100mm(l)*184mm(w)*110mm(h) Weight: 7kg Air volume: 120---330cfm Offset voltage: 0vâ±10v Air coverage: 40cm*120cm Test results:testing conditions Testing voltage:1kv to 100v operating voltage:110/220v temperature:22
Static charging and elimination products like charging generator, anti-static bar & power supply. Weighing devices like load cells, truck scales, weighing controllers, weighing accessories.
Detailed Product Description Categories canister and compression load cell Model IN-RC3 Pattern Column Cylinder Type Transform Type Resistance Strain Out-Wire 4-Wire Output Signal Type Analog Type Material Stainless Steel/Alloy Steel Capacity 5T, 10T, 20T, 30T IP Rating IP68 Application Truck Scale Accuracy OIML C2 C3 FOB port SHANGHAI Terms of Payment L/C
Detailed Product Description Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun is a hand-hold air gun designed to neutralize the static charges and removing dust particles from the surfaces in the industrial applications. Due to high-technologically design ,it is possible to produce more efficient results to solve static electric troubles even in high speed applications. It provides high performance and efficient ionization with fast discharging time. Installation is simple, stable to eliminate static electricity, wind is strong and fast speed, Because the air gun body s plastic is import from JAPAN, Light weight, higher working efficiency, adjustable air quantity. It need be used with ATS power supply together; Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun Working principle: ATS 2000 Series Ionizing Air Gun/anti-static gun/static elimination gun can produce positive and negative charge with a lot of, the high-speed gas compression blow out, can be brought to the charge on the object and fall, when the object surface is negatively charged, it will attract positive ion in the air, when the object surface is positively charged, it will be a negative ion attract in the air flow, so that the static electricity on the surface of the object eliminated, high compressed air can also blown away the stubborn dirt on the object and to neutralize electrostatic. Product features: • Plastic handle, good handle, adjustable wind power • Eliminate static efficiently • Safety induction without electric shock • Good grounding protection • Mainly used in electronics, spray, plastic, medicine, microbiology, electronics and other industries. Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun Specification Model: ATS-2001, ATS-2002, ATS-2003 Input Voltage: 4.6KV,7kv(work with ATS-3003 power supply) Current Consumption: 350 A Current Consumption: 0 -50 Weight: 0.5kg HV cable length : 3meters Operating air pressure : 0.3mpa-0.8mpa Operating air velocity : 10m/l sec Model: ATS-2004 Input Voltage: 5.6KV(work with ATS-3002 power supply) Current Consumption: 350 A Current Consumption: 0 -50 Weight: 0.5kg HV cable length : 3meters Operating air pressure : 0.3mpa-0.8mpa Operating air velocity : 10m/l sec Test Results Testing Conditions RH: 60% ±5 Temperature:22 Testing Conditions : l kv-100v Distance: 150mm Distance Positive: 0.7s Negative: 0.8s Offset Voltage : ±30V
Detailed Product Description ATS-1 Ionizing air nozzle /Anti-static nozzle/static conntrol nozzle/esd nozzle It's a special fixed equipment to eliminate static electricity, it uses strong ion wind clear the surface electrostatic and foreign body, dust, it belongs to industrial category. The appearance design is suitable for automatically removing electrostatic dust removal device. It must be used with ATS 3000 high voltage power supply. Working principle: ATS-1 Ionizing air nozzle /Anti-static nozzle/static conntrol nozzle/esd nozzle can produce positive and negative charge with a lot of, the high-speed gas compression blow out, can be brought to the charge on the object and fall, when the object surface is negatively charged, it will attract positive charge in the air, when the object surface is positively charged, it will be a negative charge attract in the air flow, so that the static electricity on the surface of the object and, to eliminate the purpose of static electricity, high compressed air can also be the object on the stubborn dirt blown away, to neutralize electrostatic and dust objective. Ionizing Air Nozzle /Anti-Static Nozzle/Static Conntrol Nozzle/Esd Nozzle features: · Eliminate static quickly · Ion airflow strongly · Widely range of wind adjusting ( it need install control valve · Good ground-connection protection Mainly used in electronics, spraying, injection molding,injection molding etc. Specification Operating Voltage Power Supply 4.6KV (work with ATS-3001 power supply) Current consumption 350μA Operating Temperature 0â??-50â?? Weight 0.5kg HV Cable length 3M Operating air pressure 0.3mpa-0.7mpa Operating Air velocity 10m/1sec Test Results Testing Voltage:1KV-100V ,Operating Voltage:4.6KV Temperature:22â?? Humidity:60%±5 Distance 150mm Decay time Positive 0.6s Negative 0.7s Offset Voltage â?¤Â±25V Product warranty and service 1.warranty All the productâ??s warranty period is one year, since the date of sale quality problems caused due to product a year own part, material and process problems, we will repair free of charge. 2.After the warranty period of service Where the company sells after warranty period still will be responsible to repair the product free in charge, in order to protect the interests of customers. 3.If customers open and repair ion fan themselves, Our company wonâ??t supply free warranty, according to the situation of discretion. Why choose us: ATSâ??s Qualification: A. 10-yearâ??s experience in static industry. B. Customers from more than 120 countries. C. Successful cases from dozens of countries. D. Professional team offers technical support to customers. E. 24hours online serivces from our professional foreign trade department. F. Our technicians go to different countries to help customers solve problems. Choosing us, you will get not only the products, but also the better service, and better operating mode.
Instead of simco CM30 Chargemaster DC503 (Case type) 30KV Charging Generator Instead of simco CM30 Chargemaster Introduce DC506 case type charging generator is a kind of static application equipment. The static charging generator is composed of a static emitter (bar) and a DC high voltage power supply. For DC high voltage power supply, provide plasma launcher(bar) of negative (or positive) high voltage, to emit negative ions (or positive ions) and then add electronic charge(artificial charge) on an object (workpiece). The higher the voltage, the greater the effective range. It is widely used in non-woven fabric, film, painting, printing, flocking, sorting and biological engineering fields. It have many advantages like simple installation, fire protection, no electric shock and stable work. Safety Instruction 1,Please make sure that the equipment has been cut off before installation; 2,Equipment installation and operation must be performed by qualified electrical engineer; 3,Ensure that the equipment is properly grounded before the equipment is running. This is a necessary condition of the safe and effective operation; 4,Without written permission, please do not repair the equipment without authorization, otherwise the equipment will not be provided warranty service; 5,The troubleshooting need to be operated by professional engineer. Before checking the fault, please cut off the power supply. Control and maintenance The output voltage of charging generator can be proactively released to avoid unnecessary charge of the high voltage stored in the high voltage power supply and the surrounding objects, to minimize electromagnetic interference Instead of simco CM30 Chargemaster Installation: Input Voltage 100Vï½?240VAC Max Input Power 200 W Output Voltage 30 KV Max Output Current 5mA Max Output Power 150 W Output Polarity - Negative/+ Positive customize Working Temperature -15â??ï½?50â?? Output Stability Max Load 1ï¼? Output connector 1bit High voltage output Voltage control Stepless pressure regulation Remote control Support signal line remote switch control Weight 7 kg Size 500*400*200mm or 400*300*200mm 6. Protection This product has protection function of short circuit, over current and temperature alarm. 7. Maintenance 1,The device has no components that user can repair by themselves; 2,If the user replace the non-original parts, there is no warranty; 3,If need maintenance, please contact the manufacturer.
Detailed Product Description Touching electrostatic eliminator also named human body electrostatic eliminator. With the rapid development of industrial economy, more and more appear particularly important to eliminate static electricity. The human body electrostatic eliminator which adopts a passive circuit, the circuit works by electrostatic human body, finally to eliminate the electrostatic effect. Its features are: small size, light weight. Without power supply. Convenient installation. The characteristics of static elimination without feeling. Touching type electrostatic eliminator, the appearance is made of stainless steel tube and the ball is made of stainless steel, which is suitable for chemical industry, metallurgy, military, oil, fireworks, computer room, high-grade hotels,hotel, office and other inflammable and explosive places. The circuit principle and the other is basically the same, it is the biggest characteristic of energy at the temperature of -50~100 â?? normal work. Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Technical indicators 1). The human body electrostatic voltage: V 20KV 2). Static release time: t 100mS 3). The maximum release current: I 0.1mA 4) the environment temperature: 20 5). Environmental humidity: 80% (40) Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Test conditions and results The human body electrostatic voltage: 18KV environment temperature: 20 â?? The five fingers release time + 0.091s residual voltage -10V The five fingers release time - 0.090s residual voltage -10V Palm release time + 0.084s residual voltage -9V Palm release time - 0.082s residual voltage -9V Electrostatic elimination time conforms to the ESD standard The use and installation methods: just a finger touch the metal ball 0.1s can eliminate the static electricity of the human body. The base type electrostatic elimination ball: first through a screw nut screw at the bottom of the tube on the stainless steel wire, grounding wire with the best of not less than 0.3 square multi strand wires to the ground. No base type electrostatic eliminating ball: the ball electrostatic eliminator ahead buried underground needs at least 400mm, a header body upward, thus completed the installation. Maintenance: Do not enter the debris inside the steel tube, especially metal objects, because there are the original circuit, if the metal circuit does not work.
